Electrolux EI24RD65HS Complete Owner's Guide (English) - Page 9

Operation / Maintenance - refrigerator drawer

Page 9 highlights

Operation / Maintenance 9 The customer may open or close the door at any time without concern of directly turning on or off any lights, digital readouts, solenoids, fans, valves, compressor, icons, tones or alarms. After power failure, the unit will immediately return to Sabbath mode. While in Sabbath mode, alarm indicators will not illuminate, nor be accompanied by audible alarms. For further assistance, guidelines for proper usage and a complete list of models with the Sabbath feature, please visit the web at http:\\www.star-k. org. To remove bottom drawer: 1. Fully extend drawer. 2. Remove two screws using Phillips® screwdriver. 3. Remove drawer by sliding forward 1/2" and pull up. 4. Reverse procedure to reinstall drawer. Removing Your Refrigerator Drawers To remove top drawer: 1. Fully extend drawer. 2. Disconnect Molex connector. 3. Remove two screws using Phillips® screwdriver. 4. Remove drawer by sliding forward 1/2" and pull up. 5. Reverse procedure to reinstall drawer. Maintaining Your Refrigerator Drawers Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life. The maintenance intervals listed are based on normal conditions. You may want to shorten the intervals if you have pets or other special considerations. Exterior Cleaning for Your Stainless Steel Model • Your stainless steel model may discolor when exposed to chlorine gas, pool chemicals, salt water, or cleaners with bleach. • Keep your stainless unit looking new by cleaning with a high quality, all-in-one stainless steel cleaner/polish on a monthly basis. Frequent cleaning will remove surface contamination that could lead to rust. Some installations will require cleaning on a weekly basis. • DO NOT CLEAN WITH STEEL WOOL PADS. • DO NOT USE CLEANERS THAT ARE NOT SPECIFICALLY INTENDED FOR STAINLESS STEEL (this includes glass, tile and counter cleansers).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13

9
Operation / Maintenance
Removing Your Refrigerator
Drawers
To remove top drawer:
1.
Fully extend drawer.
2.
Disconnect Molex connector.
3.
Remove two screws using Phillips
®
screwdriver.
4.
Remove drawer by sliding forward 1/2” and
pull up.
5.
Reverse procedure to reinstall drawer.
To remove bottom drawer:
1.
Fully extend drawer.
2.
Remove two screws using Phillips
®
screwdriver.
3.
Remove drawer by sliding forward 1/2” and
pull up.
4.
Reverse procedure to reinstall drawer.
The customer may open or close the door at any
time without concern of directly turning on or off
any lights, digital readouts, solenoids, fans, valves,
compressor, icons, tones or alarms.
After power
failure, the unit will immediately return to Sabbath
mode.
While in Sabbath mode, alarm indicators will not
illuminate, nor be accompanied by audible alarms.
For further assistance, guidelines for proper usage
and a complete list of models with the Sabbath
feature, please visit the web at http:\\www.star-k.
org.
Maintaining Your Refrigerator
Drawers
Periodic cleaning and proper maintenance will
ensure efficiency, top performance, and long
life. The maintenance intervals listed are based
on normal conditions. You may want to shorten
the intervals if you have pets or other special
considerations.
Exterior Cleaning for Your Stainless
Steel Model
• Your stainless steel model may discolor when
exposed to chlorine gas, pool chemicals, salt
water, or cleaners with bleach.
• Keep your stainless unit looking new by
cleaning with a high quality, all-in-one
stainless steel cleaner/polish on a monthly
basis. Frequent cleaning will remove surface
contamination that could lead to rust. Some
installations will require cleaning on a weekly
basis.
• DO NOT CLEAN WITH STEEL WOOL PADS.
• DO NOT USE CLEANERS THAT ARE
NOT SPECIFICALLY INTENDED FOR
STAINLESS STEEL (this includes glass, tile
and counter cleansers).