Electrolux EI30EF55GS Complete Owner's Guide (English) - Page 48
Setting self-clean, Setting delayed self-clean, IMPORTANT, NOTES
UPC - 012505544545
View all Electrolux EI30EF55GS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
48 Self-Clean Setting self-clean Setting delayed self-clean The clean feature provides 3 different choices for self-cleaning the upper oven. Set the clean for lite (2 hrs), med (3 hrs) or heavy soils (4 hrs). The example below shows setting the upper oven for self-clean to begin immediately using a medium (3 hour) setting: Step Example Press You may wish to set your appliance to perform a self-clean cycle sometime later (up to 12 hours later). The END TIME key will determine when the cleaning will stop. You will need to set the END TIME out far enough to allow for the type of clean cycle you choose (2-34 hours). Remember to add 30-40 additional minutes for the oven to cool enough and the oven door to unlock. 1. Remove racks and press UPPER OVEN 2. Choose LITE, MED or HEAVY CLEAN or or 3. Press START After pressing start, the motorized oven door latch will automatically lock the door. The DOOR lock icon will flash (Fig. 1). Once the door has locked the DOOR lock icon will remain on through the entire self-clean cycle. After self-clean, the oven may take about 30-40 minutes to cool and unlock. A Hot message (Fig. 2) will display during this period. After cooling the DOOR lock icon will flash and disappear indicating that the door has unlocked. The example below shows setting the upper oven for a lite (2 hour) self-clean cycle to end at 8:00 o'clock: Step Example Press 1. Remove racks and press UPPER OVEN 2. Choose LITE, MED or HEAVY CLEAN or or 3. Press END TIME 4. Enter 800 5. Press START Fig. 1 Fig. 2 IMPORTANT • The clean feature will not operate if ANY surface elements remain turned ON. • A self-clean cycle will not start if the appliance has the CONTROL LOCK turned on. • If a self-clean cycle was started but did not finish due to a power failure, your oven may not be completely cleaned. After power has been restored and the oven door has unlocked, set for another self-clean if needed. NOTES Example • You may press CANCEL any time during the cleaning process. After cancelling the selfclean cycle, do not attempt to open the oven door until the DOOR lock icon turns off. • If you desire to set a delayed self-clean cycle to end in 12-24 hours, use the USER PREF key to set the 12hr energy saving mode (ES) to OFF and also set the clock mode (CLO) to 24 hr.