Electrolux EIFLS60JMB Installation Instructions (All Languages) - Page 17
Reattaching door and hardware
View all Electrolux EIFLS60JMB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Reversing Door 17 Reattaching door and hardware M) Reattaching Door Assembly 1 Open the hinge to a 90 degree angle. 2 Install the door onto the hinge locating pins. O) Reinstalling Trim Ring 1 Close the door. 2 Orient the trim so 12 position is approximately ¾" to the left of top center. The opening in the trim ring should be on the hinge side. 3 Insert the trim ring in the slots and rotate it clockwise approximately ¾". 3 Secure the door with 4 long, course-thread, counter-sunk screws. P) Reinstalling Trim Plug 1 Open the door to a 90 degree angle. 2 Install the trim plug with 1 long, course- thread, panhead screw. 4 Close the door and test the operation of the latch. N) Reversing Trim Ring 1 Trim ring orientation is marked on the back. 2 Remove the trim ring cover plate. To remove the cover plate from the right, pivot point is up. To remove the cover plate from the left, pivot point is down. UP Q) Plug in washer and continue operation. 3 Rotate the trim ring cover plate and move it to the opposite opening in the trim and reinsert.