Electrolux ELAP45D8PW Complete Owner's Guide (English) - Page 11

Filter Replacement, Care And Maintenance

Page 11 highlights

airCleanerOG.qxp_AirFilter_English 1/20/14 12:05 PM Page 11 FILTER REPLACEMENT ELAP45 ! CAUTION: Turn off the air cleaner and unplug the electrical cord before performing any maintenance. 5. Remove the replacement filters from the plastic bag and replace them. 6. Replace the front panel by hooking the panel on the bottom of the unit. Filter Washable Cleancel® Pre-Filter Washable HEPA Filter set Washable Anti-Odor Carbon Filter Service life Cleaning Cycle How to clean 12 months Every 3 months Clean with vacuum cleaner or soft brush. Use warm water when the filter is very dirty. 12 months Every 3 months 12 months Every 3 months Soak the filter into warm water for 30 minutes and dry it in the shade for 24 hours. Soak the filter in warm water for 30 minutes and dry it in the shade for 24 hours. 7. Plug in air cleaner and press POWER button until short "beep" sounds. 8. Press the RESET FILTER button by gently inserting a paperclip into the RESET FILTER hole on the control panel. The light will flash 5 times before a "beep" sounds to indicate the filter has been reset. Filter 12 months - - Cassette CARE AND MAINTENANCE The Check Filter indicator will signal when to replace the Filter Cassette. The replacement period will vary depending on the hours of usage, air quality, and location of the unit. However, in most cases of normal use the filter will need to be replaced annually. This Filter Cassette should be disposed of when changed. Filter Cassette replacement 1. Turn off the air cleaner and unplug the electrical cord. 2. Remove the front panel by pulling gently from the top portion of the panel. 3. Remove the Filter Cassette by gently pulling out from the bottom and down from the top. ELAP15, ELAP30, ELAP40, ELAP45 ! CAUTION: Turn off the air cleaner and unplug the electrical cord before performing any maintenance. Clean unit as necessary by wiping with a dry, soft cloth; for stubborn stains, use a warm, damp cloth. Do not use volatile fluids such as benzene, paint thinner or scouring powder, as they may damage the surface. Keep the unit dry. Lightly vacuum air quality sensor every three months. 4. Remove all the filters from the plastic frame and dispose of the filters only. Keep the frame. 11 Electrolux Customer Service 1-800-896-9756

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

11
FILTER REPLACEMENT
ELAP45
CAUTION: Turn off the air cleaner
and unplug the electrical cord before
performing any maintenance
.
!
ELAP15, ELAP30, ELAP40, ELAP45
CAUTION: Turn off the air cleaner
and unplug the electrical cord before
performing any maintenance
.
!
Filter
Service life
Cleaning Cycle
How to clean
Washable
Cleancel
®
Pre-Filter
12 months
Every 3
months
Clean with vacuum
cleaner or soft
brush. Use warm
water when the
filter is very dirty.
Washable
HEPA
Filter set
12 months
Every 3
months
Soak the filter into
warm water for 30
minutes and dry it
in the shade for
24 hours.
Washable
Anti-Odor
Carbon
Filter
12 months
Every 3
months
Soak the filter in
warm water for 30
minutes and dry it
in the shade for
24 hours.
Filter
Cassette
12 months
The Check Filter indicator will signal when
to replace the Filter Cassette. The
replacement period will vary depending on
the hours of usage, air quality, and location
of the unit. However, in most cases of
normal use the filter will need to be
replaced annually. This Filter Cassette
should be disposed of when changed.
Filter Cassette replacement
1. Turn off the air cleaner and unplug the
electrical cord.
2. Remove the front panel by pulling gently
from the top portion of the panel.
3. Remove the Filter Cassette by gently
pulling out from the bottom and down
from the top.
4. Remove all the filters from the plastic
frame and dispose of the filters only.
Keep the frame.
5. Remove the replacement filters from the
plastic bag and replace them.
6. Replace the front panel by hooking the
panel on the bottom of the unit.
7. Plug in air cleaner and press POWER
button until short “beep” sounds.
8. Press the RESET FILTER button by
gently inserting a paperclip into the
RESET FILTER hole on the
control panel. The light will
flash 5 times before a
“beep” sounds to indicate
the filter has been reset.
CARE AND MAINTENANCE
± Clean unit as necessary by wiping with a
dry, soft cloth; for stubborn stains, use a
warm, damp cloth.
± Do not use volatile fluids such as
benzene, paint thinner or scouring
powder, as they may damage the surface.
Keep the unit dry.
± Lightly vacuum air quality sensor
every three months.
Electrolux Customer Service 1-800-896-9756
airCleanerOG.qxp_AirFilter_English
1/20/14
12:05 PM
Page 11