Electrolux EW24ID80QS Complete Owner's Guide (English) - Page 8

Status window, Display on floor, Error Codes - lowes

Get Electrolux EW24ID80QS PDF manuals and user guides View all Electrolux EW24ID80QS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

8 Operating Instructions Status window That STATUS window displays codes typically seen during normal operation or programming of the dishwasher. The STATUS window indicates the following activity: Display on floor The display on floor indicates the following activities: The cycle duration remaining time. 1HR-24HR - Indicates number of delay start hours for selected cycle. Child Lock is activated. MIN - The cycle duration or the remaining time. CLOSE DOOR Flashes once the program has been L1 - L4 - Level of Rinse Aid Dosage. entered and the START LOW RINSE - Refill pad is pressed. It also Rinse Aid flashes if the door is opened during a wash CLEAN - End of Cycle. cycle. Close the door to begin or continue the wash cycle. Remaining time of Delay start End of cycle Error codes Error Codes Displayed Error Code* i10 i20; i40; iF0 Problem Solution A low fill has been detected. Look for a pinched water supply line, or water shutoff is not completely opened. Check and clean both filters and sump area and check Clogged filters or a restricted for a pinched or blocked drain hose. If the drain line is drain line has been detected. attached to a disposer, check that the knockout plug has been removed. i30 A leak or overflow of water has been detected in the bottom pan. Look for loose connections at the water inlet valve and ensure the unit is properly leveled. A problem has been i50 detected with the drain or wash motor. Pressing the cancel button or turning power off at the A problem has been breaker for 5 min. should clear this error code and i60 detected with the water the unit can be restarted. heating system. A problem has been If this does not resolve the problem, service iC0 detected with the electronic will need to be called. control system. *In all Error Code instances, if Pressing the cancel button or turning power off at the breaker for 5 min. does not resolve the problem, contact the Electrolux Customer Care Center at 1-877-435-3287.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
8
Operating Instructions
Status window
That STATUS window displays codes typically seen
during normal operation or programming of the
dishwasher.
The STATUS window indicates the
following activity:
Display on floor
The display on floor indicates the following
activities:
The cycle duration remaining
time.
Remaining time of Delay
start
End of cycle
Error codes
1HR-24HR - Indicates
number of delay start
hours for selected
cycle.
CLOSE DOOR -
Flashes once the
program has been
entered and the START
pad is pressed.
It also
flashes if the door is
opened during a wash
cycle.
Close the door
to begin or continue the
wash cycle.
Child Lock is
activated.
MIN - The cycle duration
or the remaining time.
L1 - L4 - Level of Rinse
Aid Dosage.
LOW RINSE - Refill
Rinse Aid
CLEAN - End of Cycle.
Error Codes
Displayed
Error Code*
Problem
Solution
i10
A low fill has been detected.
Look for a pinched water supply line, or water shutoff is
not completely opened.
i20;
i40;
iF0
Clogged filters or a restricted
drain line has been detected.
Check and clean both filters and sump area and check
for a pinched or blocked drain hose.
If the drain line is
attached to a disposer, check that the knockout plug
has been removed.
i30
A leak or overflow of water
has been detected in the
bottom pan.
Look for loose connections at the water inlet valve and
ensure the unit is properly leveled.
i50
A problem has been
detected with the drain or
wash motor.
Pressing the cancel button or turning power off at the
breaker for 5 min. should clear this error code and
the unit can be restarted.
If this does not resolve the problem, service
will need to be called.
i60
A problem has been
detected with the water
heating system.
iC0
A problem has been
detected with the electronic
control system.
*In all Error Code instances, if Pressing the cancel button or turning power off at the breaker for 5 min.
does not resolve the problem,
contact the Electrolux Customer Care Center at 1-877-435-3287.