Electrolux EWFLS70JRR Complete Owner's Guide (English) - Page 15
Cycle Selection, continued
UPC - 012505382833
View all Electrolux EWFLS70JRR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Operating Instructions 15 Cycle Selection, continued DEEP CLEAN SANITIZE Use the deep clean sanitize cycle to clean and sanitize heavily soiled, colorfast fabrics including towels, bedding, cloth diapers, and children's clothing. It is recommended that you set your water heater to 120° F (49° C) or higher to ensure proper performance during this cycle. If the setting is lower or the load is extra large, the cycle time may be extended. The deep clean sanitize cycle will kill 99.9% of bacteria with no carryover of bacteria between loads. No bleach or harsh chemicals are needed, but higher temperatures are required. Please follow fabric care labels to prevent damage. CASUAL Use this cycle for cottons and blends with a permanent press or no-iron finish. ACTIVE WEAR This cycle is designed for small loads of lightweight, synthetic apparel worn for working out, running, swimming, cycling, tennis and similar activities when removal of light soil and perspiration are important. FAST WASH Quickly wash a small, lightly soiled load in 15 minutes. NOTE This cycle has been certified by NSF International, an independent third party testing and certification organization dedicated to public health, safety and environmental protection. NSF Protolcol P172 Sanitization Performance of Residential and Commercial, Family-Sized Clothes Washers The wash water is heated by an internal boost heater to a maximum of 152° F (67° C) as the load tumbles. Cold water is added to cool down the load prior to drain and spin. NOTE If the voltage at your outlet is under 110 v, the internal heater may not adequately heat the wash water. If the cycle is interrupted while the water is heating, the final temperature of the wash water may be lower and sanitation may be reduced. DELICATE Use this cycle for lightly soiled knits and delicates which require gentle washing. HAND WASH Use this cycle to provide intermittent, gentle tumbling for items labeled "Hand Wash". RINSE & SPIN Select rinse & spin for loads that need a cold water rinse or to add fabric softener that may have been omitted in a regular cycle. Add the fabric softener to the dispenser chamber. Select the spin speed appropriate for the load. NOTE If you need a drain and a spin without a rinse, you may deselect the rinse option. As a precaution, the washer door is locked once the water temperature reaches 130° F (55° C). If the cycle is cancelled during the wash phase and the water temperature is greater than 150° F (66° C), an automatic cool down and drain will occur before the door can be opened.