Epic Fitness 705treadmill English Manual - Page 11
Be Damaged When You Turn On
View all Epic Fitness 705treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
10. Attach the Crossbar (107) to the Handrails (82, 83) with four #10 x 3/4" Screws (2) and four #10 Star Washers (12). Do not tighten the Screws yet. Insert the Console Frame (102) into the Handrails (82, 83). Attach the Console Frame with four 1/4" x 1" Screws (9). Do not tighten the Screws yet. Be careful not to pinch the Upright Wire (87). Tighten the two indicated #10 x 3/4"Screws (2) first. Then, tighten the other two #10 x 3/4" Screws (2). Do not overtighten the Screws or use power tools. Next, tighten the four 1/4" x 1" Screws (9). 10 First 29 12 82 102 107 First 29 12 87 83 11. Firmly tighten the four 5/16" x 1" Flat Head Screws (3) and the two 5/16" x 1" Bolts (4) (only one side is shown). With the help of a second person, hold the console assembly near the Right and Left Handrails (83, not shown). Connect the Upright Wire (87) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire. Connect the Console Ground Wire (109) to the ground wire from the console assembly. 11 Console Assembly Console Wire 87 Wire Tie 4 3 Console Wire 87 Ground Wire 109 83 11