Epson 2200 Printer Basics - Page 76
Transporting the Printer - ink cartridge
UPC - 010343841840
View all Epson 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Transporting the Printer If you move your printer some distance, you need to remove the ink cartridges and prepare it for transportation in its original box or a similar one. Follow these steps: 1. Turn on the printer, then press the H ink button to move the print head into a position where you can remove the ink cartridges. 2. Open the printer cover, then open the cartridge cover. 3. To remove all the ink cartridges, press in the tabs on the ends of each cartridge and lift each one out of the printer. 4. Set each cartridge down with the label on top facing upward. Pack the cartridges separately in sealable plastic bags. Cartridge cover 5. Close the cartridge cover. 6. Press the H ink button to move the print head back to its home position. (The red H ink lights come on to indicate that no cartridges are installed.) 7. Wait until the print head locks in the far right position, then turn off the printer. 8. Unplug the power cord from the electrical outlet. Then disconnect the printer cable and power cord from the printer. 9. Remove any paper from the printer, then remove the paper support, roll paper holder, basket, and automatic roll paper cutter, if they're installed. 10. Tape the ink cartridge holder to the printer case using packing tape. Then close the printer cover. Tape the ink cartridge holder to the printer case Caution: Be sure to remove the tape after installing the printer in its new location. 70 Maintaining Your Printer