Epson 5000XB User Manual - Page 44
Connect the other plugs on the audio/visual cable to the Audio - powerlite 5000
View all Epson 5000XB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
To connect a video source to the projector: 1. Turn off the projector and video source if they are on. 2. If your video source uses a small, round, one-prong composite (RCA) video connector, you'll need the audio/visual cable that comes with the projector. If your video source uses a large, round, four-prong S-Video connector, you will need to purchase an S-Video cable. 3. For composite video, connect the yellow RCA plug on one end of the audio/visual cable to the projector's Video In jack. Connect the other yellow RCA plug to the video-out jack of your video source. EPSON/PowerLite 5000 - File: VS-PROJ3.eps W. Swanlund MOD> 12/17/96 4. Connect the other plugs on the audio/visual cable to the Audio In jacks of the projector: insert the white plug into the L Audio In jack and the red plug into the R Audio In jack. Connect the plug at the other end of the audio/visual cable to the audio output jacks of the video source. 26 1 • Installation