Epson 5030UBe Users Guide - Page 61
Using Picture in Picture, Available Picture in Picture Options
View all Epson 5030UBe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
• Normal for standard brightness adjustment. Note: You can set Auto Iris for each Color Mode that supports the feature. 5. Press Menu or Esc to exit the menus. Parent topic: Color Mode Using Picture in Picture You can use the Picture in Picture mode to view two image sources simultaneously. Note: You can only display HDMI or WirelessHD video sources when Picture in Picture mode is active. 1. Turn on the projector and switch to the HDMI or WirelessHD image source you want to use. 2. Press the P-in-P button on the remote control. The second HDMI video source appears as a sub-screen in the corner of the image. Note: While Picture in Picture mode is active, press the Menu button on the remote control to adjust the size and position of the sub-screen. 3. To swap the main screen and sub-screen video sources, press and hold the P-in-P button for at least three seconds. 4. Press the P-in-P button again to close the sub-screen and resume normal projection. Available Picture in Picture Options Parent topic: Using Basic Projector Features Available Picture in Picture Options You can adjust the following options by pressing the Menu button on the remote control while Picture in Picture mode is active: 61