Epson 6110i User's Guide - Page 90
Once the lamp is fully inserted, tighten its screws and replace
UPC - 010343867314
View all Epson 6110i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
5. Loosen the two screws holding the lamp in place (you can't remove them). note The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 6. Pull the lamp straight out. 7. Gently insert the new lamp. 8. Once the lamp is fully inserted, tighten its screws and replace the cover. (The projector won't come on if the lamp cover is loose.) 9. Reset the lamp timer as described in the next section. 90 Maintaining the Projector
90
Maintaining the Projector
5.
Loosen the two screws holding the lamp in place (you can’t
remove them).
6.
Pull the lamp straight out.
7.
Gently insert the new lamp.
8.
Once the lamp is fully inserted, tighten its screws and replace the
cover. (The projector won’t come on if the lamp cover is loose.)
9.
Reset the lamp timer as described in the next section.
note
The lamp(s) in this
product contain mercury.
Please consult your state and
local regulations regarding
disposal or recycling. Do not
put in the trash.