Epson 745c User Manual

Epson 745c - PowerLite XGA LCD Projector Manual

Get Epson 745c - PowerLite XGA LCD Projector PDF manuals and user guides
UPC - 010343851207
View all Epson 745c manuals
Add to My Manuals
Save this manual to your list of manuals

Epson 745c manual content summary:

  • Epson 745c | User Manual - Page 1
    Epson® PowerLite® 745c Multimedia Projector User's Guide
  • Epson 745c | User Manual - Page 2
    User's Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel. WARNING: The projector and its accessories come packaged in plastic bags. Keep plastic bags away from small children to avoid any risk of suffocation. Caution: When you replace the lamp
  • Epson 745c | User Manual - Page 3
    13 Displaying and Adjusting the Image 15 Positioning the Projector 16 Projecting the Image 18 Turning On the Projector 18 Selecting the Image Source 19 Troubleshooting Display Problems 20 You Can't Project an Image 20 The Projector and Notebook Don't Display the Same Image 20 Adjusting
  • Epson 745c | User Manual - Page 4
    Replacing the Batteries 30 Controlling the Picture and Sound 31 Switching Between Picture Sources 31 Turning Off the Picture and Sound 32 Stopping Action 32 Zooming Part to a Digital Camera or Other Device 46 Removing the USB Cable 46 Playing Sound Through the Projector 47 Connecting
  • Epson 745c | User Manual - Page 5
    Users 83 Removing the Wireless 802.11g Card 84 5 Presenting from a Memory Card, Digital Camera, or External Drive 85 Inserting a Memory Card in the Projector 86 Removing a Memory Card Your Scenario 104 Editing Your Scenario on the Projector 105 Supported File Formats 106 Contents 5
  • Epson 745c | User Manual - Page 6
    a Group 134 Connecting to a Projector in a Group 137 Exporting a Projector Group 139 Importing a Projector Group 141 8 Maintaining the Projector 143 Cleaning the Lens 144 Cleaning the Projector Case 144 Cleaning the Air Filters and Vents 145 Replacing the Lamp and Air Filter 146 Resetting
  • Epson 745c | User Manual - Page 7
    153 Viewing Lamp Usage and Other Information 155 Solving Projector Operation Problems 155 Solving Problems with the Image or Sound 156 Solving Network Problems 162 Solving EasyMP Problems 164 Solving Problems with the Remote Control 166 Where To Get Help 166 Telephone Support Services 167
  • Epson 745c | User Manual - Page 8
    D Notices 179 Important Safety Instructions 179 Remote Control Information 181 Declaration of Conformity 182 FCC Compliance Statement 183 Warranty 184 Index 187 8 Contents
  • Epson 745c | User Manual - Page 9
    - Welcome The Epson® PowerLite® 745c is an easy-to-use, lightweight projector that offers up to 2500 lumens of brightness and weighs less than 4 pounds. You can connect it to a wide range of computers and video sources, or you can project from a USB storage device, memory card, or over an 802.11g or
  • Epson 745c | User Manual - Page 10
    you the instructions you need to get your projector up and running if you are connecting to a notebook, PowerBook®, or iBook® computer, or projecting over a wireless network. ■ Start Here kit Includes this User's Guide, your Quick Setup sheet, warranty brochures, and Epson PrivateLine® Support card
  • Epson 745c | User Manual - Page 11
    and enter the PIN on the card in your Start Here kit. Or take advantage of Epson's automated support services 24 hours a day. See page 166 for more information. Registration and Warranty Your projector comes with a basic carry-in warranty as well as an international warranty that let you project
  • Epson 745c | User Manual - Page 12
    sure you have all the parts shown below: Remote control and batteries EasyMP software CD-ROM Projector Power cable Audio adapter USB cable VGA computer cable 802.11G/B wireless card Carrying case Save all packaging in case you need to ship the projector. Always use the original packaging
  • Epson 745c | User Manual - Page 13
    projector, Epson provides the following optional accessories: Product Replacement lamp Air filter replacement set ATA molded hardshell case Samsonite® wheeled soft case Notebook/projector camera High resolution document camera Part number V13H010L32 V13H134A08 ELPKS42 ELPKS35-S ELPKS43 ELPMBUNI
  • Epson 745c | User Manual - Page 14
    You can purchase these accessories from your dealer, by calling Epson at (800) 873-7766, or by visiting the Epson StoreSM at www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for dealer referral. 14 Welcome
  • Epson 745c | User Manual - Page 15
    video equipment, you need to follow some basic steps to display your image on the screen. Follow the guidelines in this chapter for: ■ Positioning the projector ■ Turning the projector on and selecting the image source ■ Troubleshooting display problems ■ Adjusting the image ■ Turning off the
  • Epson 745c | User Manual - Page 16
    there is plenty of space for ventilation around and under the projector. Do not set the projector on top of anything that could block the vents under the projector. ■ Make sure the projector is within 10 feet of a grounded electrical outlet or extension cord. 16 Displaying and Adjusting the Image
  • Epson 745c | User Manual - Page 17
    the lock port on the projector's left side. You can purchase this from Epson; see page 13. If you place the projector below screen level, you'll on the projector. See page 24 for detailed information about correcting the image shape. For instructions on installing the projector in a permanent
  • Epson 745c | User Manual - Page 18
    equipment are set up as described on page 37. Then follow the instructions below to start the projector and display an image. note To shut down the projector, see page 26. Shutting down the projector correctly prevents premature lamp failure and possible damage from overheating. Turning On the
  • Epson 745c | User Manual - Page 19
    projector. The projector beeps once and the Power light flashes green as the projector warms up, then an image begins to appear. When the Power light stops flashing and remains green, the projector on each button, or select EasyMP to project wirelessly or from a memory card.TM note To focus
  • Epson 745c | User Manual - Page 20
    Troubleshooting Display Problems Follow these guidelines if you're having trouble displaying an image. You Can't Project an a function key that lets you toggle between the LCD screen and the projector, or display on both at the same time. It may be labeled CRT/LCD or have an icon such as . You may
  • Epson 745c | User Manual - Page 21
    screens, you should check your monitor settings to make sure both the LCD screen and the external monitor port are enabled. From the Control Panel, You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple® menu, select
  • Epson 745c | User Manual - Page 22
    If you're using OS 8.6 to OS 9.x: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select Control Panels, then click Monitors or Monitors and Sound. 2. Click the Arrange icon. Click here Drag
  • Epson 745c | User Manual - Page 23
    . 3. If necessary, you can fine-tune the height or level the image by turning the projector's rear foot. Raising the projector causes the image to distort or "keystone," but you can manually correct the shape as described on page 24. Projector rear foot Displaying and Adjusting the Image 23
  • Epson 745c | User Manual - Page 24
    on the remote control to zoom in on a portion of the image. See page 33 for instructions. Adjusting the Image Shape In most cases, you can maintain a square or rectangular image by placing the projector directly in front of the center of the screen with the base of the lens level with
  • Epson 745c | User Manual - Page 25
    correction, then use the remote's Resize button to adjust the aspect ratio. See page 113. ■ Or press the Menu button on the remote control or projector, select the Setting menu, and press Enter. From the Setting menu, select Keystone and press Enter. Use the pointer button on the remote control to
  • Epson 745c | User Manual - Page 26
    received any signals for 30 minutes. This conserves electricity, cools the projector, and extends the life of the lamp. If you want to start projecting again, press the P Power button. If you are done using the projector, unplug the power cord. To enable sleep mode, see page 120. Shutting Down the
  • Epson 745c | User Manual - Page 27
    stops flashing. Then press the PPower button. 4. If you extended the adjustable front foot, press up on the blue foot release lever to retract it. 5. Replace the lens cap and unplug the power cord. caution Turn the projector off when not in use. Continuous 24-hour-a-day use may reduce the
  • Epson 745c | User Manual - Page 28
    28 Displaying and Adjusting the Image
  • Epson 745c | User Manual - Page 29
    be sure to visit presentersonline.com. Using the Remote Control The projector includes a number of tools to enhance your presentation. All of to adjust the color mode for various environments (page 34) or as a wireless mouse when projecting from a computer (page 35). This chapter covers: ■ Using
  • Epson 745c | User Manual - Page 30
    at the screen. ■ Stand within 20 feet of the projector. ■ Avoid using the remote under bright fluorescent lamps or in direct sunlight, or the projector may not respond properly. caution When replacing batteries, take the following precautions: ■ Replace the batteries as soon as they run out. If the
  • Epson 745c | User Manual - Page 31
    the Search button on the remote control (or the Source Search button on the projector) repeatedly until you see the image you want on the screen. ■ On the to the port identified on each button, or to use EasyMP to project wirelessly or from a memory card. After you select a source, the screen goes
  • Epson 745c | User Manual - Page 32
    Turning Off the Picture and Sound You can use the A/V Mute button on the remote control to turn off the image and sound. This feature is useful if you want to temporarily redirect your audience's attention. ■ To turn off the picture, press the A/V Mute button. The screen turns blue. ■ To turn the
  • Epson 745c | User Manual - Page 33
    Zooming Part of Your Image You can zoom in on a portion of the image using return the image to its original size. Controlling the Volume To change the volume, press the or control or projector. button on the remote note To temporarily shut off the sound and picture, press the A/V Mute button.
  • Epson 745c | User Manual - Page 34
    switch the aspect ratio between 4:3 and 16:9. This lets you play certain digital video images or movies recorded on certain DVDs in 16:9 widescreen format. For computer images, resizing is normally unnecessary, since the projector automatically resizes the image to make the best use of the display
  • Epson 745c | User Manual - Page 35
    Operating Your Computer with the Remote Control If you've connected a computer to the projector with a USB cable, as described on page 40, you can use the remote control in place of your computer's mouse. This gives you more flexibility when delivering
  • Epson 745c | User Manual - Page 36
    press the Pointer button on the remote control. A pointer appears on the screen. Pointer If you prefer to use a different style of pointer, see the instructions in the next section. 2. Use the pointer button on the remote control to position the pointer on the screen. 3. When done using the pointer
  • Epson 745c | User Manual - Page 37
    computer, and/or to video equipment, such as a VCR, DVD player, or video camera. You can also connect the projector to a USB storage device, digital camera, or external speakers. Follow the instructions in this chapter on: ■ Connecting to a computer ■ Connecting video equipment ■ Connecting to
  • Epson 745c | User Manual - Page 38
    on page 39 (available from Epson; see page 13). Connecting to a Computer You can connect the PowerLite projector to any computer that has a cable connection), see the instructions below. After connecting to the computer, you may also want to do one of the following: ■ Connect a USB cable so you can
  • Epson 745c | User Manual - Page 39
    page 18 for instructions on turning on the projector and adjusting the image Epson (see page 13). 1. To use the adapter, remove its cover as shown and set its DIP switches according to the resolution you want to use, such as 16-inch mode. See your Macintosh documentation for instructions. 2. Replace
  • Epson 745c | User Manual - Page 40
    as PowerPoint, from up to 20 feet away. The wireless mouse function is supported on systems with a USB port running Windows XP, 98SE, Me, or 2000, or Macintosh OS X 10.2.x to 10.3.x or OS 8.6 to OS 9.x. 1. Locate the USB cable that came with your projector. 2. Connect the square end of the cable to
  • Epson 745c | User Manual - Page 41
    an RGB Video Source" on page 45. After connecting video cables, you may also want to connect an audio cable to play sound through the projector; see page 47. RCA connector (composite video) S-Video connector VGA connector (RGB video) Connecting to Computers, Cameras, and Other Equipment 41
  • Epson 745c | User Manual - Page 42
    cables. 4. If you don't need to make any other connections, see page 18 or the Quick Setup sheet for instructions on turning on the projector and adjusting the image. Once the projector is turned on, select the image source: press the Search button on the remote control or press the Source Search
  • Epson 745c | User Manual - Page 43
    video equipment or you can purchase one from Epson; see page 12). 2. Connect the cable to the S-Video connector on your player and the S-Video connector on the projector: 3. If you want to play sound through the projector, see page 47 for instructions on connecting audio cables. 4. If you don't need
  • Epson 745c | User Manual - Page 44
    to-VGA adapter for this connection. You can order this cable (ELPKC19) from Epson; see page 14 for more information. 1. Locate a component-to-VGA video connections, see page 18 for instructions on turning on the projector and adjusting the image. Once the projector is turned on, select the image
  • Epson 745c | User Manual - Page 45
    on connecting audio cables. 4. If you don't need to make any other connections, see page 18 for instructions on turning on the projector and adjusting the image. Once the projector is turned on, select the image source: press the Search button on the remote control or press the Source Search
  • Epson 745c | User Manual - Page 46
    sure you use the AC adapter to power the hard drive. Connecting to a Digital Camera or Other Device You can connect your digital camera, USB flash memory drive, USB hard drive, or digital photo storage device, such as the Epson P-1000, to the projector using the USB cable specified for your device
  • Epson 745c | User Manual - Page 47
    you have video equipment connected to the Video or S-Video port, use an RCA-style audio cable and the audio adapter included with the projector. Audio adapter 2. Connect the other end of the cable to the audio output connector(s) on your computer or video equipment. Connecting to Computers, Cameras
  • Epson 745c | User Manual - Page 48
    in amplifiers. First, you need to use the Settings menu to set the EasyMP Audio Out option to External. See page 114 for instructions. To connect speakers to the projector, follow these steps: 1. Locate the appropriate cable to connect your speakers. Depending on your speakers you may be able to use
  • Epson 745c | User Manual - Page 49
    on the screen. You'll find instructions in this chapter on: ■ Starting EasyMP ■ Connecting to the projector in Ad Hoc (computer-to-computer) mode or Access Point (infrastructure) mode ■ Using wireless security options ■ Projecting wirelessly ■ Removing the wireless 802.11G/B card Before starting
  • Epson 745c | User Manual - Page 50
    the card before transporting the projector. See page 84 for instructions. Starting EasyMP Before connecting to the projector, you have to switch the projector and press the P Power button. 2. Press the EasyMP button on the remote control to select EasyMP as the source. 3. Insert the Epson 802.11G
  • Epson 745c | User Manual - Page 51
    to make sure your 802.11G/B card is properly inserted. Ad Hoc mode Access Point mode 4. If you've already set up your computer and projector for the mode you want to use-Ad Hoc mode (also called computer-tocomputer mode) or Access Point mode (also called infrastructure mode)-skip to
  • Epson 745c | User Manual - Page 52
    Follow the instructions below for the mode you want to use. Using Ad Hoc Mode To use Ad Hoc (computer-to-computer) mode, adjust your projector and wireless card or adapter settings as described in this section. Configuring the Projector 1. Switch the projector to EasyMP mode and insert the Epson 802
  • Epson 745c | User Manual - Page 53
    Enter button on the remote control. 3. Highlight Basic under Wireless LAN and press Enter. You see the following screen: Easy next to Easy connect mode, then press Enter to select it. 4. Make sure the projector has a unique name, so you can identify it when connecting to it from your computer
  • Epson 745c | User Manual - Page 54
    press Enter. 5. If your network card supports an SSID or ESSID name (see page projector can access it, turn Projector keyword on. Then when you want to connect to the projector, it displays a randomized four-digit ready to set up your computer for wireless projecting. Go to "Configuring the Network
  • Epson 745c | User Manual - Page 55
    , you need to make sure the settings for your notebook's or PC's network card match the settings you entered for the projector. 1. Access your wireless network Properties window. For example, in Windows XP you would click Start > Control Panel > Network and Internet Connections. Then click the
  • Epson 745c | User Manual - Page 56
    2. Right-click the Wireless Network Connection icon and select Properties. You see a screen similar to this: Click here 3. Click the Configure button. 4. Click the Advanced tab. You see a screen similar to this: 56 Presenting Through a Wireless Network
  • Epson 745c | User Manual - Page 57
    from the AirPort status menu on the Macintosh menu bar. If you're having problems detecting the projector, follow these steps: 1. From the Apple pull-down menu, select System Preferences. 2. Double-click the Network icon. You see the Network settings window. Presenting Through a Wireless Network 57
  • Epson 745c | User Manual - Page 58
    icon on the menu bar at the top of the Macintosh desktop. You see the AirPort status menu: Choose the ESSID you assigned to the projector 8. Check to make sure AirPort is turned on. 9. Select your projector's ESSID. 58 Presenting Through a Wireless Network
  • Epson 745c | User Manual - Page 59
    Mode To use Access Point (infrastructure) mode, first adjust your projector and wireless access point or AirPort base station settings as described in this section. Configuring the Projector 1. Switch the projector to EasyMP and insert the Epson 802.11G/B card (see page 50). You see this screen
  • Epson 745c | User Manual - Page 60
    access it, turn Projector keyword on. Then when you want to connect to the projector, it displays a randomized four-digit number or "keyword" on the screen. When prompted by NS Connection, you can enter the keyword on your computer to connect (see page 77). 60 Presenting Through a Wireless Network
  • Epson 745c | User Manual - Page 61
    Network Screen. Now you're ready to set up your computer for wireless projecting. Go to "Configuring the Network Settings for Windows" below, 70 to set up the option that your network uses on the projector. note For specific details about your network, please consult your network administrator. If
  • Epson 745c | User Manual - Page 62
    Configuring the Network Settings for Windows Before connecting to the projector, you need to make sure the settings for your computer's wireless card or adapter match the settings you entered for the projector. 1. Access your wireless network Properties window. For example, in Windows XP you would
  • Epson 745c | User Manual - Page 63
    You see a screen similar to this: Click here 3. Click the Configure button. 4. Click the Advanced tab. You see a screen like this: Presenting Through a Wireless Network 63
  • Epson 745c | User Manual - Page 64
    to match the name assigned to the access point (which should also be the projector's ESSID). ■ Make sure Encryption is Disabled if you have not set up encryption on the projector. 6. Click the General tab and make sure that your wireless card or adapter is enabled. 7. When you're done, click OK to
  • Epson 745c | User Manual - Page 65
    If you don't see this tab, you may need to enable your wireless card or adapter by clicking Configure to access the device settings; then follow any instructions on the screen to enable the device.) note For specific details about your network, please consult your network administrator. note If you
  • Epson 745c | User Manual - Page 66
    your access point. 14. When you're done making settings, click OK to close the dialog box. Now you're ready to connect to the projector. See "Projecting Wirelessly" on page 74. 66 Presenting Through
  • Epson 745c | User Manual - Page 67
    Checking the Gateway IP Address on Windows If you're entering IP addresses manually and need to find out the gateway IP address (the IP address of your access point), make sure the wireless connection to the access point is currently active, as described in the previous section. Then follow these
  • Epson 745c | User Manual - Page 68
    3. Click the Support tab. The gateway's IP address is listed as shown: Gateway AirPort network name from the AirPort status menu on the Macintosh menu bar. If you're having problems connecting to the projector, follow these steps: 1. From the Apple pull-down menu, select System Preferences. 2. Click
  • Epson 745c | User Manual - Page 69
    name matches your projector's ESSID. If not, enter the projector's ESSID in the on in your projector's advanced menu projector software warns you to turn off AirPort when you first connect the projector projector in static IP mode, deselect the Distribute IP addresses checkbox. Make sure your projector
  • Epson 745c | User Manual - Page 70
    to make sure AirPort is turned on. 12. Select the name of your AirPort network. Using Wireless Security Options You can use the following security options when connecting to the projector wirelessly: WEP encryption, WPA security, or LEAP authentication. To set these security features up on your
  • Epson 745c | User Manual - Page 71
    the numeric keypad while holding down the Num button on the remote control. Press the Num button again to exit numeric keypad mode. Presenting Through a Wireless Network 71
  • Epson 745c | User Manual - Page 72
    ; then press the pointer button to the right to move to the next character position. When done typing the key, press Enter. 72 Presenting Through a Wireless Network
  • Epson 745c | User Manual - Page 73
    the numeric keypad while holding down the Num button on the remote control. Press the Num button again to exit numeric keypad mode. Presenting Through a Wireless Network 73
  • Epson 745c | User Manual - Page 74
    adapter, click Extension on the EMP NS Connection dialog box, then click Switch LAN on the extension dialog box. Projecting Wirelessly Once you've started EasyMP and set up your projector and computer in either Ad Hoc mode or Access Point mode, follow these steps to start NS Connection and project
  • Epson 745c | User Manual - Page 75
    connection to the access point or that your wireless card or adapter is enabled, and that its SSID matches the projector's ESSID. In Macintosh, check the AirPort status menu (click note If none of these suggestions work, see the troubleshooting information beginning on page 162. Presenting Through
  • Epson 745c | User Manual - Page 76
    but not identical, to the last segment of the IP address for your wireless interface, access point, or base station. ■ Restart your computer and start NS Connection again. ■ If you still don't see your projector, follow the instructions in "Connecting in IP Connect Mode" on page 80 to connect to the
  • Epson 745c | User Manual - Page 77
    doing so automatically disconnects the other user. 5. If you set up the projector to prompt you for a keyword before connecting, you see a screen like data transmission speed. Enter keyword Type in the four-digit number displayed on the EasyMP Network screen and click OK a Wireless Network 77
  • Epson 745c | User Manual - Page 78
    projector's menu system from an HTML browser window. See page 132 for more information. Lets you keep the projected image on screen, even if the image on your computer changes. Turns off the image and sound. Lets you zoom in on a part submenu: Click to close 78 Presenting Through a Wireless Network
  • Epson 745c | User Manual - Page 79
    the bottom edge (this option functions like the and buttons on the projector's control panel). ■ Contrast Increase or decrease image contrast. ■ Color Mode modes to adjust the color and brightness for specific environments: sRGB for computer displays, Dynamic for presentations Wireless Network 79
  • Epson 745c | User Manual - Page 80
    Try this method if you are unable to connect automatically. Connecting in IP Connect Mode You can establish a connection manually using IP Connect Mode even if your projector and computer are on a different subnet (Access Point mode only) or connecting over different routers. 1. Start NS Connection
  • Epson 745c | User Manual - Page 81
    Enter the IP address and click Search 5. Enter the projector's IP address and click Search. note You can add up to 16 projectors to the list. If you add more, NS Connection begins to delete projectors from the list, starting with the first projector added. Presenting Through a Wireless Network 81
  • Epson 745c | User Manual - Page 82
    appears if the search fails to find the projector If the search fails to find a projector with the specified IP address, the searching icon , enter the four-digit number displayed on the EasyMP Network screen and click OK. The computer's image is transmitted to the projector and appears on the
  • Epson 745c | User Manual - Page 83
    is already using it (Access Point mode only), follow these steps. 1. Start NS Connection (see page 74). You see this screen: Select projector 2. Select the projector you want to use and click Connect. You see this message: 3. Click Yes to connect. The other user is automatically disconnected and
  • Epson 745c | User Manual - Page 84
    .11g Card Follow these steps to remove the card from your projector. 1. If you're running NS Connection, click Disconnect on the control bar. caution Never remove the card while the card indicator light is green or when projecting wirelessly. You may damage the card or lose data. Click Disconnect
  • Epson 745c | User Manual - Page 85
    need an adapter to use it with the projector. See page 101. Presenting from a Memory Card, Digital Camera, or External Drive The projector's EasyMP feature lets you give presentations from a memory card or a digital camera connected to the projector with a USB cable. You can play movies, display
  • Epson 745c | User Manual - Page 86
    card. The memory card is not functional when a digital camera is connected. caution Never force the card into the slot; you could damage the projector. Inserting a Memory Card in the Projector Follow these steps to insert the memory card in the projector: 1. If necessary, insert the card into a PC
  • Epson 745c | User Manual - Page 87
    or image, or to begin playing a movie. ■ Press Page up to display the previous slide or image, or to replay a movie. Presenting from a Memory Card, Digital Camera, or External Drive 87
  • Epson 745c | User Manual - Page 88
    the display of images in the folder. ■ Screen switching time Sets the display time for each image. Choose No if you want to change slides manually. 88 Presenting from a Memory Card, Digital Camera, or External Drive
  • Epson 745c | User Manual - Page 89
    or images, or editing a scenario on the projector. In Guide mode, a drop-down menu appears whenever projector or remove the memory card. Presenting Image Files From a Digital Camera This section explains how to project individual image files on your digital camera using EasyMP CardPlayer and a USB
  • Epson 745c | User Manual - Page 90
    . If it does, it is probably a USB mounted device and will work with the projector software. The EasyMP software does not support TWAIN-compliant digital cameras. If your camera's memory card is supported by the projector, you can insert it into the projector's card slot and project your images (see
  • Epson 745c | User Manual - Page 91
    2. Plug in your external hard drive. 3. Turn on the projector and the remote control, if they're not already on. 4. Select EasyMP as the source by pressing the the Esc button on the remote control, then select Exit and press Enter. Presenting from a Memory Card, Digital Camera, or External Drive 91
  • Epson 745c | User Manual - Page 92
    you may also need an adapter to use it with the projector. See page 101. Creating a Scenario A scenario is presentation that you want to transfer to the projector. If you prefer, you can create a You see a message that some transitions are not supported. Click OK. EMP SlideMaker 2 starts and your
  • Epson 745c | User Manual - Page 93
    your computer's hard drive before transferring it. Don't save it directly to the memory card, or it may not play correctly. Presenting from a Memory Card, Digital Camera, or External Drive 93
  • Epson 745c | User Manual - Page 94
    File and Folder 1. Double-click the EMP SlideMaker2 icon on your computer's desktop (or click Start > Programs or All Programs > Epson Projector > EMP SlideMaker2). You see the EMP SlideMaker 2 screen: File-type selection box Scenario window Folders window File window Thumbnail window 94
  • Epson 745c | User Manual - Page 95
    -quality images look better on the screen but may take longer to appear. 4. Click OK. You return to the EMP SlideMaker 2 screen. Continue with the instructions in the next section to build your scenario. note The scenario name you enter is also the name of the folder for your scenario on
  • Epson 745c | User Manual - Page 96
    can also use the instructions in this section to .DIB extension) ■ Movie files (with .MPG extension); must be MPEG 2 (MPEG1 is not supported) Follow these steps: 1. Use the navigation tools on the left side of the EMP SlideMaker 2 96 Presenting from a Memory Card, Digital Camera, or External Drive
  • Epson 745c | User Manual - Page 97
    those you add with EMP SlideMaker 2. note Unless you change the transition setting, your slides will automatically advance after 30 seconds. Presenting from a Memory Card, Digital Camera, or External Drive 97
  • Epson 745c | User Manual - Page 98
    to your memory card. Setting Up Transitions EMP SlideMaker 2 lets you set your slides to advance manually or automatically after a specified period of time. You can also choose from a variety of transition menu appears: Cell menu 98 Presenting from a Memory Card, Digital Camera, or External Drive
  • Epson 745c | User Manual - Page 99
    4. Choose how you want to advance to the next cell. ■ If you want to change slides manually using the remote control, select On mouse click. ■ If you want your slides to advance automatically, and use that file to create a scenario. Presenting from a Memory Card, Digital Camera, or External Drive 99
  • Epson 745c | User Manual - Page 100
    it to. 1. Use the navigation tools in the folders window to locate the scenario file you want to review. Click the file, then click File > Open to open the scenario. 2. Click Scenario Option(s) > 're done, close the window. 100 Presenting from a Memory Card, Digital Camera, or External Drive
  • Epson 745c | User Manual - Page 101
    cards. Most require a PC card adapter to allow insertion into the projector (check with your computer dealer to purchase a PC card adapter). ■ CompactFlash™ ■ Memory Stick™ ■ SD™ (Secure Digital ■ SmartMedia™ ■ MicroDrive™ ■ MMC (Multimedia) ■ ATA flash (does not require a PC card adapter) Be sure
  • Epson 745c | User Manual - Page 102
    step 11 to remove the card and insert it in the projector. ■ If you want it to run automatically, click OK and continue with the following instructions. You see the Edit Autorun window: note If more than one it to play only once. 102 Presenting from a Memory Card, Digital Camera, or External Drive
  • Epson 745c | User Manual - Page 103
    USB device. See your computer's documentation if you need instructions projector warms up. ■ If your scenario is not set to autorun, you need to start it manually digital camera connected while the memory card is inserted. If you do, neither the camera nor the card will function with your projector
  • Epson 745c | User Manual - Page 104
    your memory card (see page 86 for instructions). note Even if your scenario is set to change slides automatically, you can still change slides manually as described here. Controlling Your Scenario While your you want to exit. 104 Presenting from a Memory Card, Digital Camera, or External Drive
  • Epson 745c | User Manual - Page 105
    saved with the scenario, but remain in effect only as long as the card is in the projector and the projector is turned on. 1. Highlight the scenario you want to edit, then press Enter. 2. From the OK button and press Enter. Presenting from a Memory Card, Digital Camera, or External Drive 105
  • Epson 745c | User Manual - Page 106
    be projected from a memory card, digital camera, external hard drive, or flash memory drive: File Type Scenario Graphics Movie Extension .sit .bmp .gif .jpg .png .mpg Notes These are scenario files created using the EMP SlideMaker 2 program that is included with the projector. Only 24-bit color
  • Epson 745c | User Manual - Page 107
    the projector's on-screen menus to adjust the image, sound, and other features. This chapter covers the following information: ■ Using the menu system ■ Adjusting the image ■ Adjusting signal settings ■ Customizing projector features ■ Using the projector security features ■ Customizing power and
  • Epson 745c | User Manual - Page 108
    options available for the highlighted menu are shown on the right. 2. Use the pointer button on the remote control (or the arrow buttons on the projector) to scroll through the menu list. When you've highlighted the desired menu, press the Enter button to select it. 3. Once you've selected the
  • Epson 745c | User Manual - Page 109
    the settings in a specific menu, enter the menu whose settings you want to change, select Reset, and confirm as needed. (The example below shows how to reset the Image menu.) + ON OFF Reset settings for current menu Reset settings for all menus To restore all the projector settings to their
  • Epson 745c | User Manual - Page 110
    Adjusting the Image You can use the Image menu to adjust the brightness, sharpness, color, tint, and contrast. 1. Press the Menu button on the projector or remote control and select the Image menu. You see the Image menu screen. 2. Use the pointer button to highlight the desired option, then adjust
  • Epson 745c | User Manual - Page 111
    . (Not available if sRGB is selected as the Color Mode setting.) note The Brightness setting changes the opacity of the projector's LCD panels. You can also change the lamp's brightness. Select Brightness Control in the Setting menu, then choose High or Low (the default setting is High). Adjusting
  • Epson 745c | User Manual - Page 112
    a component video signal. ■ Video Signal Leave this setting at Auto unless you are using a 60-Hz PAL system (then select PAL60). 112 Fine-Tuning the Projector
  • Epson 745c | User Manual - Page 113
    default). ■ Operation Lock Lets you disable all of the buttons on the projector except the Power button. See page 119 for more information. ■ Pointer Shape Lets you brightness. The Low setting reduces power consumption and noise, and extends the lamp's operating life. Fine-Tuning the Projector 113
  • Epson 745c | User Manual - Page 114
    is entered three times in succession, the projector's operation is locked and the power cord must be disconnected and reinserted to redisplay the password screen. If an incorrect password is entered thirty times in succession, the user must contact Epson to unlock the projector. 114 Fine-Tuning the
  • Epson 745c | User Manual - Page 115
    see this screen: 2. Use the pointer button to set Power ON Protect to ON. Then press Enter. 3. Press and use the numeric keypad to enter a four digit password. (The default setting is 0000.) 7. When the password feature disabled. If you want the projector to request the password every time it is
  • Epson 745c | User Manual - Page 116
    times in succession, you see the message The projector's operation will be locked. Request code xxxxx and the projector switches to standby mode for approximately 5 minutes. Write down the request code. Then disconnect the projector's power cord from the electrical outlet, reconnect it, and turn
  • Epson 745c | User Manual - Page 117
    succession, the projector remains locked and you must contact Epson to unlock it. If you have forgotten the password, contact Epson with the source, such as a DVD player or digital camera. Then follow these steps to capture the image and transfer it to the projector: 1. Press the Menu button on the
  • Epson 745c | User Manual - Page 118
    . 7. When the message Save image as user's logo? appears, select Yes and press Enter. Saving the logo may take a few moments. Do not use your projector, remote control, or video source while the logo is being saved. 8. When you see the message Completed, press Esc to return to the menu screen
  • Epson 745c | User Manual - Page 119
    3. Select ON and press Enter. 4. Select Yes and press Enter to confirm the setting. 5. Press the Menu button to exit. Customizing Power and Operation You can use the Extended menu to customize the way the projector displays images, enable quick startup, turn sleep mode on or off, and customize other
  • Epson 745c | User Manual - Page 120
    to be monitored over a network when it is in standby mode (the power light is orange). ■ Link 21L Enable this setting if you want to be able to control the projector from a USB-connected computer. ■ Language Select from nine languages to be used for the projector menus. 120 Fine-Tuning the
  • Epson 745c | User Manual - Page 121
    can connect the projector wirelessly in Access Point mode or over a wired network (as described on page 59). This chapter covers the following information: ■ Monitoring and controlling your projector with EMP Monitor ■ Using e-mail alerts to warn you of problems ■ Understanding notification messages
  • Epson 745c | User Manual - Page 122
    computer to manage your projectors, whether connected wirelessly or over a wired network. It lets you easily turn the projectors on or off (together To start EMP Monitor, click Start > Programs or All Programs > Epson Projector > EMP Monitor. If you've added the program to the Startup programs
  • Epson 745c | User Manual - Page 123
    network. Or click Manual registration and enter the projector's network IP address. note If Auto detect fails to find the projector, your projector may not be connected or configured correctly for the network. See page 52 to configure the projector for a wireless network. Managing Projectors 123
  • Epson 745c | User Manual - Page 124
    found on the network are listed as shown below: Click here note To delete a projector from the list, highlight the projector name, and click Delete. 4. Select each projector you want to add by clicking its name, then clicking the Add button. When you're done, click Close. You see this screen
  • Epson 745c | User Manual - Page 125
    Status, Video Source, and Error icons shown below. These let you see which projectors are currently being used, from which source (or port) they are projecting an image, and if a problem occurs. note To monitor a projector when it's in standby mode (plugged in but not turned on), you must select
  • Epson 745c | User Manual - Page 126
    of the status icons: Status icons (green) Projecting; no problems (dark) Turned off; no problems (green) Projecting; problems detected (dark) Turned off; problems detected Network error (for example, not connected to the network or power cable disconnected). You may also see this error if
  • Epson 745c | User Manual - Page 127
    of the error icons. See page 151 for recommended solutions to problems. Error icons Lamp replacement notification (the lamp is nearing the end of its life; see page 146) High-speed cooling in progress (the projector is getting too hot but continues to operate) Overheating (projection turned
  • Epson 745c | User Manual - Page 128
    's menu system (see page 120.) You can set up e-mail alerts to warn you of problems with the projector on either a wireless network or a wired LAN connection. 1. Insert the Epson 802.11g wireless card and set up your projector to work in Access Point mode, as described on page 59. 2. Turn on your
  • Epson 745c | User Manual - Page 129
    You see the following screen: 4. Select Config in the lower right corner of the screen and press Enter on the remote control. 5. When you see the screen below, select Mail and press Enter. Select Mail Managing Projectors 129
  • Epson 745c | User Manual - Page 130
    button to move to the next position. To correct a mistake, press the left side of the button to return to the previous position. 130 Managing Projectors
  • Epson 745c | User Manual - Page 131
    addresses you provided using EMP NetworkManager. The message includes "Epson Projector" in the subject line. The body of the message contains: ■ The name of the projector ■ The projector's IP address ■ A description of the problem The problem descriptions are similar to the errors reported by EMP
  • Epson 745c | User Manual - Page 132
    or wired LAN), you can use a standard web browser to monitor and control each one. 1. Make sure the Epson 802.11g wireless card is inserted in the projector's card slot and the projector is configured for Access Point mode, as described on page 59. 2. Open the web browser and enter the IP address
  • Epson 745c | User Manual - Page 133
    wireless network, start NS Connection (see page 74) and connect to the projector you want to monitor. Then click on the control bar that appears on the screen. The projector as needed in the main part of the screen. These settings correspond to those found in the projector's menu system; for details,
  • Epson 745c | User Manual - Page 134
    are less than 100, the first digit of the octet should be zero (0). Using Projector Groups You can register projectors as a group if you want to a Group You can register up to 16 projectors as a group, and all projectors must be part of your wireless network. 1. Start NS Connection. (See page
  • Epson 745c | User Manual - Page 135
    4. Click the Advanced button. You see this screen: 5. Enter a name for the group in the Connection Group box. Then enter the IP address of the projector you want to register in the IP address box: note You cannot use the addresses 0.0.0.0 or 255.255.255.255. Managing Projectors 135
  • Epson 745c | User Manual - Page 136
    . The IP address appears in the list of registered projectors and the searching icon appears beside it. If the projector is found, its name appears in the projector list. note To remove a projector from the group, select it from the projector list and click Delete. 7. Repeat steps 5 and 6 for each
  • Epson 745c | User Manual - Page 137
    a Projector in a Group Follow these steps to connect to a projector in a group: 1. Start NS Connection. (See page 74.) 2. Click the Extension button on the EMP NS Connection screen. You see this screen: Select these two boxes 3. Select Use IP connect mode and Use Group List. Managing Projectors 137
  • Epson 745c | User Manual - Page 138
    4. From the Connection Group list, choose the group you want to connect to and click OK. 5. When you see the next screen, click IP connection. (If the upper left button on the screen says IP connect mode rather than Automatic search mode, skip this step.) 138 Managing Projectors
  • Epson 745c | User Manual - Page 139
    click Connect. 7. If you want, repeat step 5 to connect to additional projectors. The computer's image appears on the projector screen. Exporting a Projector Group You can export group information as a file to another computer on the wireless network. This is useful if you want to share group access
  • Epson 745c | User Manual - Page 140
    at least one group before the Export button is active. 5. Click Export to export a file for all groups in the Connection Group list. 140 Managing Projectors
  • Epson 745c | User Manual - Page 141
    from the new computer, follow the steps beginning on page 137. Importing a Projector Group You can also import group information as a file to another computer on the wireless network. 1. Start NS Connection. (See page 74.) 2. Then click the Extension button on the EMP NS Connection screen. You
  • Epson 745c | User Manual - Page 142
    . The names of all of the groups in the file are added to the Connection Group list on the Advanced screen. To connect to the projector from the new computer, follow the steps beginning on page 137. 142 Managing
  • Epson 745c | User Manual - Page 143
    any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp cover. Dangerous electrical voltages in the projector can injure you severely. Do not try to service this product yourself, except as specifically explained in this User's Guide
  • Epson 745c | User Manual - Page 144
    not use wax, alcohol, benzene, thinner, or other chemical detergents. These can damage the case. Cleaning the Projector Case Before you clean the case, turn off the projector and unplug the power cord. ■ To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth. ■ To remove stubborn
  • Epson 745c | User Manual - Page 145
    the power cord. 2. Turn the projector upside down. 3. To clean the intake vents, use a small vacuum cleaner designed for computers and other office equipment. If you don't have one, gently clean the vents with a soft brush (such as an artist's paintbrush). note To order replacement air filters
  • Epson 745c | User Manual - Page 146
    States for a replacement lamp. Request part number V13H010L31. In Canada, please call (800) 463-7766 for dealer referral. Follow these steps to replace the lamp and air filters: 1. Turn off the projector. 2. When the Power light stops flashing, unplug the power cord. 3. Let the projector cool for
  • Epson 745c | User Manual - Page 147
    the projector over. Press in on the tabs and lift up the lamp cover. 5. Loosen the two screws holding the lamp in place (you don't need to remove them). Loosen, but don't remove these screws 6. Hold the lamp as shown and pull it straight out. warning This product includes a lamp component that
  • Epson 745c | User Manual - Page 148
    until it clicks in place. 11. Insert the two cover tabs, then press down on the cover until it snaps into place. 12. Reset the lamp timer as described in the next section. 148 Maintaining the Projector
  • Epson 745c | User Manual - Page 149
    After you replace the lamp, you need to reset the lamp timer using the projector's menus. 1. Press the Menu button on the remote control or on the projector's control panel. You see the main menu. 2. Use the pointer button on the remote control (or the arrow buttons on the projector) to highlight
  • Epson 745c | User Manual - Page 150
    note Epson shall not be liable for any damages incurred during transportation. Transporting the Projector The projector contains many glass and precision parts. Follow these guidelines to prevent damage: ■ When shipping the projector for repairs, use the original packaging material if possible. If
  • Epson 745c | User Manual - Page 151
    you how to contact technical support for problems you can't solve yourself. The following information is included: ■ Using the projector's on-screen help system ■ What to do when the projector's status lights flash ■ Solving projector operation problems ■ Solving problems with the image or sound
  • Epson 745c | User Manual - Page 152
    't working, you can get help by pressing the blue ? Help button on top of the projector or on the remote control. The following choices are available: ■ Problems with image ■ Problems with sound ■ Problems with source search ■ Language change Follow these steps to get help: 1. Press the blue ? Help
  • Epson 745c | User Manual - Page 153
    it. Then plug the power cord back in and turn on the projector. If this doesn't solve the problem, check the lights on top of the projector. What To Do When the Lights Flash The lights on top of the projector indicate the projector's status. Power light Lamp light Temperature light Refer to
  • Epson 745c | User Manual - Page 154
    cooling fan or temperature sensor. Contact Epson for help as described on page 166. Warning: Except as specifically explained in this User's Guide, do not attempt to service this product yourself. Flashing orange It's time to replace the lamp. See page 146 for instructions. If you continue to use
  • Epson 745c | User Manual - Page 155
    if the usage hours on this menu are close to the life span of your lamp. note The information displayed depends on the input signal currently selected. Solving Projector Operation Problems The power doesn't turn on. ■ If the projector doesn't turn on when you press the PPower button, make sure the
  • Epson 745c | User Manual - Page 156
    Solving Problems with the Image or Sound No image appears on the screen. ■ Check that the Power light is green, not flashing, and the lens cap is off. ■ The projector may be in standby or sleep mode. If the Power light is orange, press the PPower button to turn the projector on. ■ If the power was
  • Epson 745c | User Manual - Page 157
    LCD. Allow a few seconds for the projector to sync up after pressing it. Check your notebook's manual or online help for details. On most systems, the key lets you toggle between the LCD screen and the projector or Color LCD dialog box the projector screen as well as the LCD screen.
  • Epson 745c | User Manual - Page 158
    1200) and the frequency is supported by the projector (see page 177). If necessary, change your computer's resolution setting as described below. Only part of the computer image is displayed. for a different resolution. See your software documentation for specific information. 158 Solving Problems
  • Epson 745c | User Manual - Page 159
    your computer and video cables away from the power cord as much as possible to prevent interference. ■ The video signal may be split between the computer and the projector. If you notice a decline in the projected always select Reset to return to the factory default settings. Solving Problems 159
  • Epson 745c | User Manual - Page 160
    reset the projector's tracking and sync settings. ■ If further adjustment is needed, you can fine-tune the Tracking and Sync settings manually using the Signal If you're displaying a computer image, use the Color Mode option in the projector's Image menu to adjust the color (see page 110). ■ If you'
  • Epson 745c | User Manual - Page 161
    projector's lamp may need to be replaced. See page 146 for instructions . There is no sound, or the sound is not loud enough. ■ Press the button on the projector the projector and projector or remote to control the volume. See page 48 or
  • Epson 745c | User Manual - Page 162
    can't connect to the projector using NS Connection. ■ Make sure you've installed the Epson 802.11g card correctly in the projector; see page 50. If Macintosh menu bar. In Windows, see the documentation for your computer's wireless card or adapter for details. ■ Make sure you aren't projecting one
  • Epson 745c | User Manual - Page 163
    wireless card or adapter is enabled and its SSID is set to match the projector on and the projector's ESSID or your , check your projector's IP address segment of the projector's IP address check your projector's Gateway address on the projector's Access you set up your projector to connect in DHCP
  • Epson 745c | User Manual - Page 164
    If you're using AirPort, the projector's ESSID should match the AirPort network name see page 80. Solving EasyMP Problems An image displayed with EasyMP appears . Some JPEG files from digital cameras cannot be previewed. window. EMP SlideMaker 2 does not support PowerPoint 95 or 97. Files created
  • Epson 745c | User Manual - Page 165
    your camera or drive shows up on your desktop as a drive letter when you connect it to your computer. If it does, it is probably a USB-mounted device and will work with your projector. The projector does not support TWAIN-compliant digital cameras. Solving Problems 165
  • Epson 745c | User Manual - Page 166
    a day, as listed in the following table. Service Access World Wide Web From the Internet, you can reach Epson's product support page at http://support.epson.com. After selecting your product, you can access troubleshooting information, download product documentation, and receive technical advice
  • Epson 745c | User Manual - Page 167
    service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support Epson PowerLite 745c) ■ Product serial number (located on the bottom of the projector) ■ Computer configuration ■ Description of the problem
  • Epson 745c | User Manual - Page 168
    168 Solving Problems
  • Epson 745c | User Manual - Page 169
    CD-ROM includes the software you need to use the projector's EasyMP features-for presenting over a wireless network, transferring PowerPoint presentations to a memory card, and monitoring the projector from a remote location. Epson Projector Software CD-ROM includes EMP Monitor and EMP Network
  • Epson 745c | User Manual - Page 170
    sure your Macintosh meets the following requirements: ■ Macintosh OS X 10.2.4 or later ■ AirPort (802.11b) or AirPort Extreme (802.11g) wireless network interface ■ Power Macintosh® series, iMac®, PowerBook®, or iBook® series ■ At least 256MB of RAM ■ At least 128MB of free hard disk space ■ SVGA
  • Epson 745c | User Manual - Page 171
    's CD-ROM or DVD drive. You see this screen: 2. Click Install, then follow the on-screen instructions to install your projector software. If you see a message that the Epson GDI Monitor Driver has not passed Windows Logo testing, click Continue Anyway. 3. When installation is complete, close the
  • Epson 745c | User Manual - Page 172
    Software on a Macintosh Follow these steps to install EMP NS Connection: 1. Insert the EasyMP software CD-ROM in your drive. 2. If necessary, double-click the Epson CD-ROM icon to open its window. 3. Double-click the Installer for Mac OS X icon. You see this screen: 4. Click Install, then follow the
  • Epson 745c | User Manual - Page 173
    mounting hardware; see page 13 for ordering information. You'll also need to select Front/Ceiling or Rear/Ceiling as the Projection option of the projector's Extended menu to flip the image upside-down. To project from the rear, onto a semi-transparent screen, select Rear or Rear/Ceiling (see page
  • Epson 745c | User Manual - Page 174
    . This causes the image to lose its square shape. You can correct the distortion using the Keystone function in the projector's menu system (see page 113). If you place the projector so that the base of the lens is level with the bottom of the screen, the image should be square and
  • Epson 745c | User Manual - Page 175
    :1 30 to 300 inches 3.2 to 39.7 feet (1.0 to 12.1 meters) Front, rear, upside-down (ceiling mount) 1 W monaural 4:3 (horizontal:vertical) 1:1.2 36 dB (Low Brightness mode) Automatic (manual adjustment capability ±15°) Supports USB (type B) 175
  • Epson 745c | User Manual - Page 176
    Type UHE (Ultra High Efficiency) Power consumption 170 W Lamp life Approx. 2000 hours (High Brightness mode) Approx. 3000 hours (Low Brightness mode) Part number V13H010L32 Remote Control Range 20 feet (6 meters) Batteries (2) Alkaline AAA Dimensions Height Width Depth Weight 2.7 inches
  • Epson 745c | User Manual - Page 177
    Part 15B Class B (DoC) UL60950 Third Edition ICES-003 Class B CSA C22.2 No. 60950 Directive 73/23/EEC Directive 89/336/EEC IEC 60950 Third Edition EN 55022, EN 55024 Pixelworks™ DNX™ ICs are used in this projector. Compatible Video Formats The projector supports × 600* Technical Specifications 177
  • Epson 745c | User Manual - Page 178
    ) 60 - HDTV (720p) 50 - HDTV (1080i) 60 - HDTV (1080i) 50 - TV480i 60 - TV480i 50 - SDTV (480p) 60 - SDTV (480p) 50 - *The image is resized using Epson's SizeWise™ Technology. 178 Technical Specifications
  • Epson 745c | User Manual - Page 179
    about your Epson PowerLite projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not place the projector on an unstable cart, stand, or table. ■ Do not use the projector near water or sources of heat. ■ Use the type of power source
  • Epson 745c | User Manual - Page 180
    refer servicing to qualified service personnel under the following conditions: When the power cord or plug is damaged or frayed. If liquid has been spilled into the projector, or if it has been exposed to rain or water. If it does not operate normally when you follow the operating instructions, or
  • Epson 745c | User Manual - Page 181
    conditions commonly cause problems for most infrared-controlled equipment. Try the following: ■ The remote control's batteries may be low on power; replace them. ■ Dim the ambient lighting and/or turn off any fluorescent lights. ■ Close any window coverings and/or move the projector out of direct
  • Epson 745c | User Manual - Page 182
    , Part 2 and 15, Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Located at: Epson America undesired operation. Trade Name: Epson Type of Product: Projector Model: EMP-745 Marketing Name: PowerLite 745c 182 Notices
  • Epson 745c | User Manual - Page 183
    Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
  • Epson 745c | User Manual - Page 184
    purchase (except that the warranty period is 90 days for projector lamps). For warranty service, you must provide proof of the date of original purchase. What Epson Will Do To Correct Problems: If you elect carry-in warranty service, please bring the product securely packaged in its original
  • Epson 745c | User Manual - Page 185
    REMEDIES ABOVE FAIL, EPSON'S ENTIRE LIABILITY SHALL BE LIMITED TO A REFUND OF THE PRICE PAID FOR THE EPSON PRODUCT COVERED BY specific legal rights, and you may also have other rights, which vary from jurisdiction to jurisdiction. To locate the Authorized Epson Servicer nearest you, call the Epson
  • Epson 745c | User Manual - Page 186
    186 Notices
  • Epson 745c | User Manual - Page 187
    filter cleaning, 145 ordering, 13 replacing, 146 to 148 AirPort, configuring for wireless, 57 to 58, 68 to 70 Anti-theft device, 13, 17 Aspect ratio, 175 ATA flash cards, 101 Audio adapter, 12, 47 connecting equipment, 47 to 48 controlling volume, 33 problems, troubleshooting, 161 turning off (using
  • Epson 745c | User Manual - Page 188
    to 103 Encryption, 57, 64, 71 to 72, 77 Environmental specifications, 176 Epson accessories, 13 to 14, 167 presentation tips, 10 PrivateLine Support, 11, 167 technical support, 10, 166 to 167 ESSID, 54, 57, 64, 69, 76, 163 Exporting projector groups, 139 to 141 External drive, projecting from, 90 to
  • Epson 745c | User Manual - Page 189
    , 113, 159, 175 Keyword, 54, 60, 77 L Lamp number of hours used, 155 ordering, 13 replacing, 146 to 149 specifications, 176 status light, 153 to 154 Lamp timer, resetting, 149 Language setting, 120, 152 Laptop computer connecting to, 38 to 39 display problems, 20 to 22, 156 to 157 selecting source
  • Epson 745c | User Manual - Page 190
    Support, 11, 167 Problems color, 160 connecting wirelessly, 75 to 76, 162 to 164 image, 156 to 161 monitoring projector, 162 no signal, 20, 156 to 157 remote control, 166 scenarios, 164 to 165 sound, 161 using on-screen help, 152 Progressive format, 106 Projecting without screen, 34 Projection lamp
  • Epson 745c | User Manual - Page 191
    , 181 numeric keypad, using, 53, 115 pointer tool, using, 36 problems, 166, 181 range, 176 running slideshow with, 103 to 104 specifications, 176 switching sources, 31 troubleshooting, 166 Removing memory card, 86 wireless card, 84 Replacing lamp, 146 to 149 Request code, password, 116 Resetting
  • Epson 745c | User Manual - Page 192
    , 61 Troubleshooting blank screen, 20 to 22, 156 to 157 cut-off image, 158 distorted image, 24 to 25 EasyMP problems, 164 to 165 image and sound problems, 156 to 161 network problems, 162 to 164 no signal, 20, 156 to 157 projector problems, 151 to 154 remote control problems, 166 wireless projection
  • Epson 745c | User Manual - Page 193
    to 133 WEP encryption, 71 to 72 Windows, configuring for wireless, 55 to 57, 62 to 66 Wireless connecting manually, 80 to 82 e-mail alerts, 128 to 131 LEAP authentication, 73 network card, 50, 84, 169 presentation, 49 to 83 problems, 162 to 164 projector groups, 134 to 142 WEP encryption, 71 to 72
  • Epson 745c | User Manual - Page 194
    Card Slot Exhaust air vent Foot adjust lever Front adjustable foot Control Panel Zoom ring Focus ring Remote control recever Security lock Lens cover Audio port Type B USB port Video port S-Video port Computer/Componnent Video port Power inlet Type A USB port Rear adjustable foot Speaker
  • Epson 745c | User Manual - Page 195
    in PowerPoint Enter (left mouse button) Esc (right mouse button) Activate on-screen pointer Switch between equipment connected to projector ports Optimize computer images Turn projector on and off Move cursor on screen Turn off picture and sound Stop action Activate numeric keypad Select color mode
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
Epson
®
PowerLite
®
745c
Multimedia Projector
User’s Guide