Epson 7850p Start Here Guide - Page 2

4 If you see a blank screen or the No Signal message, make sure the power light on the projector is green and not flashing, and the lens cover is off. If the screen is still blank, restart your laptop, or press the Comp button on the remote control again. If mute mode is active, press the A/ V Mute button on the remote control. Windows®: Hold down the Fn button on the keyboard and press the function key that lets you display on an external monitor. It may have an icon such as , or it may be labeled CRT/LCD. 5 If your projector and laptop don't display the same image, do the following: Windows: Try using the CRT/LCD or function key, as described above. If this doesn't work, double-click Display in the Control Panel. Make sure both the LCD screen and monitor port are enabled. (Allow a few seconds for the projector to sync up.) See your Windows online help for details. Macintosh® OS X: From the Apple menu, select System Preferences, then click Displays. Select the VGA Display or Color LCD dialog box, click the Arrange (or Arrangement) tab, and make sure Mirror Displays is checked. Click here Make sure this is checked Macintosh OS 9 or earlier: From the Apple menu, select Control Panels, then click Monitors or Monitors and Sound. Click the Arrange icon, then drag one monitor icon on top of the other; this lets you display on both the projection screen and the LCD screen. If this option isn't available, click the Monitor icon and select a Simulscan resolution. Click here Drag one monitor icon onto the other 6 If you see an image but it's not displayed correctly, press the Auto button on the remote control to automatically readjust it. If projecting wirelessly... Follow the steps in this section to project over an 802.11b wireless network from a computer running Windows 98, 2000, Me, XP, or Macintosh OS X 10.2.4 or above. NOTE: You must have already installed the projector's EasyMP software and configured your projector and computer. See the User's Guide for instructions. Also, your computer must have an 802.11b network card or transmitter installed. 1 Make sure you've turned on the projector and adjusted the image as described in sections 1 and 2 on the front of this sheet. 2 Select EasyMP as the source by pressing the EasyMP button on the remote control. 3 Insert the EPSON 802.11b card with the blue label facing outward, as shown. When fully inserted, the black end of the card will protrude. NOTE: Use only the EPSON 802.11b card. Other brands may not be compatible and are not guaranteed to work. Once the card is inserted, you see a screen like this: Projector keyword (optional) 4 From the computer's Start menu, select EMP NS Connection (Windows), or double-click the EMP NS Connection icon in your Applications folder (Macintosh). 5 If you see this screen, select the name and IP address for your computer's 802.11b wireless card and click OK. You see this screen: Select your projector If the connection is working properly, you see your projector listed as shown. If you don't see your wireless device listed, restart your computer. If it still doesn't appear, see the User's Guide for help. 6 Once the name of your projector appears, select it and click Connect. 7 If you see a message asking for a keyword, enter the four digits that appear on the EasyMP Network Screen and click OK. (See the screen at the top of this column to locate the projector keyword.) You see your computer 's image transmitted to the projector, and a floating control bar appears on the screen: Click here to minimize 8 When done with your presentation, click Disconnect on the control bar. Where To Get Help Telephone Support Services To use the EPSON PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the EPSON PrivateLine Support card included in your Start Here kit. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers: U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday through Friday Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through Friday Toll or long distance charges may apply. Electronic Support Services EPSON provides assistance through electronic support services 24 hours a day at http://support.epson.com. For tips, templates, and training for developing successful presentations go to http://www.presentersonline.com. EPSON is a registered trademark and EasyMP is a trademark of SEIKO EPSONCORPORATION. PowerLite and PrivateLine are registered trademarks of Epson America, Inc. General Notice: Other product names are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks. © 2003 by Epson America, Inc. 12/03 C P D - 1 6 3 9 6 R 1 Printed in XXXXXXXXX