Epson ActionPrinter 3250 User Manual - Page 68
READY, beeper sounds several times and
View all Epson ActionPrinter 3250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Troubleshooting l Paper feeding is crooked or the paper jams. The position of your paper supply may be preventing it from feeding straight. Make sure the paper supply is not obstructed by a cable or some other object. Make sure that your paper supply is positioned within 1 meter (3 feet) of the printer. Check that the holes on the sides of the paper are aligned with each other. Also, make sure the sprocket units are locked and their covers are closed. Check that the paper-thickness lever is set correctly for the paper you are using. See "Adjusting the paper-thickness lever" in Chapter 2. Check that the paper size and thickness are within the specified range. See the paper specifications in the Appendix. l The paper does not eject properly. The page may be too long. Tear off the fresh supply of paper and eject the page from the printer. Use only paper that is within the specified length range described in the Appendix. l When you switch between single skeets and continuous paper, the beeper sounds several times and the READY light goes 0ff. You may have tried to change the paper-release lever position while paper remained in the printer. Return the paper-release lever to the previous position and eject paper (or feed paper to the paper-park position). Then change the paper-release lever position. Using the Printer 3-23