Epson Artisan 810 Start Here - Page 3

4 Install ink cartridges Note: Do not load paper yet. 1 Lift up the scanner. 2 Unpack the ink cartridges. 3 Remove only the yellow tape from each cartridge. Caution: Don't remove any other seals or the cartridges may leak. 4 Insert the cartridges in the holder for each color. Press each cartridge down until it clicks. 5 Lower the scanner. 6 Wait while ink charges. Charging takes about 5 minutes. Note: Your Artisan 810 Series ships with full cartridges and part of the ink from the first cartridges is used for priming the Artisan 810 Series. Replacement cartridges will print more pages. Caution: Don't turn off the Artisan 810 Series while the ink system is initializing or you'll waste ink. 5 Load paper The paper cassette has 2 trays. The main tray is for letter-size, legal-size, or 8 x 10-inch paper. The photo tray is for 4 x 6- or 5 x 7-inch photo paper. 1 Pull out the paper cassette. Then slide back the photo tray and lift it up.