Epson Artisan 835 Start Here - Page 2
Load paper - printer
View all Epson Artisan 835 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
2 Unpack the ink cartridges. 2 Squeeze the edge guides and slide them out. Then insert paper with the glossy or printable side face-down. 3 Remove only the yellow tape from each cartridge. 3 Slide the edge guides against the paper. C aution: Don't remove any other seals or the cartridges may leak. 4 Insert the cartridges in the holder for each color. Press each cartridge down until it clicks. 4 Lower the photo tray. 5 Lower the scanner. 5 Squeeze the edge guides and slide them out. Then insert 4 6-inch or 5 7-inch photo paper with the glossy or printable side face-down. 6 Wait while the printer is priming, which takes about 5 minutes. Note: Your printer ships with full cartridges and part of the ink from the first cartridges is used for priming the printer. Replacement cartridges will print more pages. C aution: Don't turn off the printer while it is priming or you'll waste ink. 5 Load paper The paper cassette has 2 trays. The main tray is for A4, letter-size, legal-size, or 8 10-inch paper. The photo tray is for 4 6- or 5 7-inch photo paper. For instructions on loading legal-size paper, see the online User's Guide. 1 Pull out the paper cassette. Then slide back the photo tray and lift it up. Note: Make sure the paper fits under the edge guides. 6 Slide the edge guides against the paper. 7 Keep the cassette flat as you insert it. 8 Extend the output tray and flip up the stopper.