Epson BrightLink EB-770Fi Users Guide - Page 341

• If you connected a new device or changed any connections, make sure the CEC function is set for the connected device. You may need to restart the device. • Connect no more than three devices that support HDMI CEC at the same time. • If you have connected a speaker or receiver, set the output to PCM. Parent topic: Solving Projector or Remote Control Operation Problems Related references Input Signal Settings - Signal I/O Menu Solving Network Problems Check the solutions in these sections if you have problems using the projector on a network. Solutions When Wireless Authentication Fails Solutions When You Cannot Access the Projector Through the Web Solutions When Network Alert E-Mails are Not Received Solutions When the Image Contains Static During Network Projection Solutions When You Cannot Connect Using Screen Mirroring Solutions When the Image or Sound Contains Static When Using Screen Mirroring Solutions When the Projected Screen is not Shared Correctly Parent topic: Solving Problems Solutions When Wireless Authentication Fails If you cannot authenticate a wireless connection, try the following solutions: • If the wireless settings are correct, but authentication fails, you may need to update the Date & Time settings in the Management menu, if available. • Check the Security settings and passphrase in the Network menu. • If the access point security is WPA3-EAP, change the access point setting to WPA2/WPA3-EAP. Parent topic: Solving Network Problems Related references Event ID Code List Network Settings - Network Menu Administration Settings - Management Menu 341