Epson C11CA49201 Start Here - Page 3
Lower the scanner., button to charge the ink. Charging takes about - ink cartridges
UPC - 010343871762
View all Epson C11CA49201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
3 Remove only the yellow tape from each cartridge. Caution: Don't remove any other seals or the cartridges may leak. 4 Insert the cartridges in the holder for each color. 5 Press each cartridge down until it clicks. 6 Close the ink cartridge cover. Press it down until it clicks. 7 Lower the scanner. 8 Press the OK button to charge the ink. Charging takes about 21/2 minutes. Note: Your WorkForce 310 Series ships with full cartridges and part of the ink from the first cartridges is used for priming the WorkForce 310 Series. Caution: Don't turn off the WorkForce 310 Series while the ink system is charging or you'll waste ink.
3
Remove only the yellow tape from each cartridge.
Caution:
Don’t remove any other seals or the cartridges may leak.
4
Insert the cartridges in the holder for each color.
5
Press each cartridge down until it clicks.
6
Close the ink cartridge cover. Press it down until it clicks.
7
Lower the scanner.
8
Press the
OK
button to charge the ink. Charging takes about
2
1
/
2
minutes.
Note:
Your WorkForce 310 Series ships with full cartridges and part of the ink
from the first cartridges is used for priming the WorkForce 310 Series.
Caution:
Don’t turn off the WorkForce 310 Series while the ink system is
charging or you’ll waste ink.