Epson C11CA52201 Quick Guide - Page 47
Replacing Ink Cartridges
UPC - 010343871663
View all Epson C11CA52201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Replacing Ink Cartridges Make sure you have a new ink cartridge before you begin. You must install new cartridges immediately after removing the old ones. Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Leave the expended cartridge(s) installed until you have obtained a replacement, or the ink remaining in the print head nozzles may dry out. If you remove a low or expended cartridge, you cannot reinstall and use it. 1. Turn on the Artisan 810 Series. If a cartridge is low or expended, you see a message on the display screen. Note which cartridges need to be replaced and press OK. (You cannot print until you have replaced any expended ink cartridges.) If you're replacing a cartridge before it's expended, follow the steps below. 2. Open the scanner. Caution: Make sure the Automatic Document Feeder is closed when you open the scanner. 3. Squeeze the tab on the cartridge and lift it straight up. Dispose of it carefully. Do not take the used cartridge apart or try to refill it. Warning: If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. Keep ink cartridges out of the reach of children. Replacing Ink Cartridges 47