Epson C31C515A8721 User Manual - Page 16
Replacing Roll Paper, Troubleshooting
View all Epson C31C515A8721 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
English 11. Close the roll paper cover and tear off the roll paper with the manual cutter, as shown in illustration O. Note: Do not open the roll paper cover during printing or paper feeding. When using the printer, be sure to cut the roll paper with the manual cutter after paper feeding is complete. Replacing Roll Paper 1. Open the roll paper cover by using the tab, as shown in illustration H. 2. Types B and D: Remove the used roll paper core. 3. Type A only: Remove the take-up spool, and open the unit by using the unit open lever, as shown in illustration I; then remove the used roll paper core. 4. Insert new roll paper. See the section "Inserting Roll Paper". Troubleshooting No lights on the control panel ❏ Check the power supply cable connections and the power outlet. ERROR LED is flashing or lit ❏ The print head temperature may be too high or low. Wait until the print head cools or warms and the printer resumes printing automatically. ❏ Make sure that the roll paper cover is properly closed. ❏ Types A and B: The autocutter blade is not in the normal position and the autocutter is locked up. If it is a simple lock-up, the error is corrected automatically. If not, see the instructions below to return the blade to the normal position manually. ❏ A paper jam has occurred. To remove the jammed paper, see the instructions below. ❏ Be sure to check if the specified power source is used. PA-6xxx and PB-6xxx cannot be used with this printer. ❏ Turn off the power, wait several seconds, and then turn it on again. If the error remains, contact your supervisor or a qualified service person. 8 TM-U220 User's Manual