Epson EMP 7250 Owners Manual - Page 32
Connecting to a PC Laptop Computer, Connecting the Audio Cable
View all Epson EMP 7250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Connecting the Audio Cable 1. If you will be using audio, connect one end of the audio cable to the Audio 1 jack on the projector. (Use the Audio 2 jack if you are connecting a second computer.) Audio 1 jack audio cable 2. Connect the other end of the audio cable to the speaker or audio out port on the computer's sound card. Connecting to a PC Laptop Computer To connect the projector to your PC laptop computer, you need to: • Connect the computer cable • Connect the mouse and/or serial cable (if you want to use the remote control as a mouse or use the ELP Link IV software) • Connect the audio cable (if you'll be projecting with audio) Follow the steps in each section for the cables you need to connect. Before beginning, turn off the projector and computer if they are on. ♦ Note: Laptop configurations vary. See your computer manual for the location of the ports needed to connect your projector. s s s s s 12