Epson Expression 800 Product Information Guide - Page 3
OPTIONAL TRANSPARENCY UNIT, Basic Specifications
View all Epson Expression 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
EPSON Expression 800 ID Setting Selectable from 0 to 7 (factory setting: 2); asterisk (*) setting is only used when transporting scanner Terminator Internal terminator selectable (enable/ disable) Connector type Two 50-pin half-pitch connectors Connector pin arrangement 25 1 50 26 Initialization methods The scanner can be initialized (returned to a fixed set of conditions) in the following ways: Hardware initialization Software initialization When the scanner is turned on. When the scanner receives a SCSI Reset signal from the SCSI interface. When the software sends the ESC @ (initialize the scanner) command. When the scanner receives a SCSI Bus Device Message. Optional Transparency Unit Specifications The transparency unit (B813152) allows you to scan positive and negative transparent materials-35 mm slides, 35 mm filmstrips, and film up to 8.5 × 11.7 inches in size. In addition to four film guides, it comes with a reflective document mat that allows you to alternate between scanning transparent materials and normal reflective (paper) documents. Basic Specifications Dimensions Weight Maximum read area Width: 12.8 inches (324 mm) Depth: 21.3 inches (540 mm) Height: 3.6 inches (92 mm) 11 lbs (5 kg) 8.5 × 11.7 inches (216 × 297 mm) Electrical Power supply: (supplied from the scanner) 24 VDC 5 VDC Power consumption: 24 VDC: 0.6 A 5 VDC: 0.1 A Resistance to electrical noise (static electricity) case: 10 kV or less metal: 7 kV or less Reliability MCBF 100,000 cycles Temperatures Operation 41 to 95 °F (5 to 35 °C) Storage −4 to 140 °F (-20 to 60 °C) Humidity (without condensation) Operation 10% to 80% Storage 10% to 85% Operating conditions Ordinary office or home conditions; avoid extreme dust, operation under direct sunlight, and strong light sources. Safety approvals UL 1950 CSA C22.2 No. 950 EN 60950 IEC 950 EMC FCC Part 15 subpart B class B CSA C108.8 class B AS/NZS3548 Class B CE Marking Low Voltage Directive 73/23/EEC EN60950 EMC Directive 89/336/EECEN55022 Class B EN50082-1 IEC 801-2/801-3/801-4 Document specifications Transparencies up to 8.5 × 11.7 inch film (negative film, positive film) 35 mm strip film (negative, positive) 35 mm slides (negative, positive) Brownie size strip film 1/99 EPSON Expression 800 - 3