Epson LQ-1170 User Manual - Page 67
Skip-over-perforation, Continuous paper length, Tear off, Using the Printer, Turning DIP switch
View all Epson LQ-1170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
DIP Switches Skip-over-perforation Turning DIP switch 1-8 on when you are using continuous paper enables the skip-over-perforation function. Use this function to leave a one-inch (25.4 mm) space between the last printable line on one page and the first printable line on the next page so that the printer skips over the perforation. Most application programs take care of the top and bottom margins. Do not turn on skip-over-perforation unless your program does not provide these margins. You can adjust your top-of-form position with the MICRO FEED buttons if you want half of the space at the bottom of one page and half at the top of the next page. Continuous paper page length When you are printing on continuous paper, DIP switches 2-1 and 2-2 let you select one of the four page lengths described in DIP-switch Table 5. Tear off You can turn DIP switch 2-3 on to select tear-off mode. See page 3-16 for a complete description of using the tear-off mode. Tear-off mode is available only with continuous paper loaded with the rear or front push-tractor. Using the Printer 3-11