Epson MovieMate 50 User's Guide - Page 15
Adjusting the Picture
View all Epson MovieMate 50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Screen surface quality can also affect the reflectivity of light in your projected image. Screen reflective properties are measured as "gain" rates, with 1.0 gain as the reflectivity of a white board. Highly reflective screen surfaces (above 1.0 gain) create a brighter image, but the brightness may not be uniform enough for a dedicated home theater environment and the colors may appear to shift from different viewing angles. In a home theater room with darkened surroundings and controlled lighting, a screen surface with less than 1.0 gain is best. For rooms where you cannot control the light or will always have ambient light, you may want to select a screen surface with more than 1.0 gain to compensate for the additional brightness. Adjusting the Picture After you set up your Epson MovieMate and start your movie, you may need to make certain adjustments. ■ If the image is too low or too high, you can extend the feet (by rotating them) and tilt MovieMate up. If you tilt the image, it will lose its rectangular shape. Use the Keystone buttons on the remote control or the control panel to adjust the image shape. Playing Movies 15