Epson MovieMate 55 User's Guide - Page 47
Resetting the Lamp Timer, to highlight
View all Epson MovieMate 55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
6. Gently insert the new lamp and tighten its screws. Caution: Don't touch the glass portion of the lamp with your bare hands; the invisible residue left by the oil on your hands may shorten the lamp life. Use a cloth or gloves to handle the new lamp assembly. 7. To replace the lamp cover, slide it into position, then tighten the screw. (Epson MovieMate won't work if the lamp cover is loose.) 8. After replacing the lamp, you need to reset the lamp timer, as described in the next section. Resetting the Lamp Timer 1. Connect the power cable and press the button to turn Epson MovieMate on. 2. Press on the remote control. You see the Visual Setup menu. 3. Press to highlight Info, then press to select it. 4. Press again. You see the following on the screen: Caring for Your Epson MovieMate 47