Epson Perfection 3200 Pro Start Here Card - Page 1

4040929-01 Printed in Singapore XXX Start Here EPSON Perfection® 3200 Pro 1 Unpack Your Scanner 1 Make sure you have everything: Scanner CD-ROM with EPSON® Scan driver, software, and electronic manuals LaserSoft® SilverFast® Ai6 CD-ROM Adobe® Photoshop® Elements 2.0 CD-ROM ArcSoft® Software Suite CD-ROM Scanner cover/ transparency unit USB cable Film holders MonacoEZcolor 2 CD-ROM Note: If you'll be connecting your scanner using IEEE 1394 (FireWire®, iLink™), you need to purchase an IEEE 1394 cable (not included). 2 Remove all the packing tape, but leave the large sticker in place until instructed to remove it. IMPORTANT! Leave the sticker in place until you are instructed to remove it. 3 Insert the hinges on the cover into the square holes at the back of the scanner. (Make sure the cable does not get caught under the scanner cover.) Close the cover. 2 Install the Software Wait! You must install your software before connecting the scanner to your computer. The install process may take up to 15 minutes. Be sure to close all open programs and turn off any virus protection programs. If you don't already have Adobe Photoshop or Photoshop Elements on your computer, install Photoshop Elements from the CD-ROM included with your scanner. To view the Photoshop user manuals, you'll need Adobe Acrobat® Reader® (included on your Photoshop Elements CD). Windows® First you'll install Adobe Photoshop Elements, then your scanner software. Photoshop Elements 1 Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or DVD drive. The installer starts automatically. 2 Make sure US English is selected and click Next. 3 Follow the on-screen instructions to begin installation and accept the software license conditions. continue 4 When you see this screen, click the Adobe Photoshop Elements button. Click Adobe Photoshop Elements 5 Follow the on-screen instructions. When you're asked for a software serial number, enter the number printed on the sticker attached to the CD-ROM sleeve. 6 If you don't have Acrobat Reader, eject the CD-ROM and repeat steps 1 - 3. Then select Adobe Acrobat Reader to install it. Continue with the instructions below to install the scanner software. Scanner Software 1 Insert the scanner software CD-ROM in the CD-ROM or DVD drive. The installer starts automatically. If it doesn't start, double-click My Computer (in Windows XP, click Start > My Computer), double-click EPSON, then double-click EPSON. 2 When you see a message asking you to select a language, click English. 3 At the Software Installation screen, click Install. 4 Read the license agreement, then click Agree. Click Install 5 Follow the on-screen instructions to install each program. After each one is installed, click Next or Finish to continue. Note that EPSON Smart Panel™ installs in several steps. If you have PDA (Palm™ or Pocket PC) software on your computer, Presto! PixExpress will be installed. 6 Click Exit. The EPSON Product Registration screen appears. 7 Register your scanner as instructed. At the last screen, click Done or close your browser. Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software Suite, following the instructions included with each program. Then continue with the instructions under "Connect the Scanner." Macintosh® First you'll install Adobe Photoshop Elements, then your scanner software. Photoshop Elements 1 Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or DVD drive. 2 Double-click the or English folder. CD-ROM icon and double-click the 3 Double-click the Install Photoshop Elements icon. 4 Follow the on-screen instructions to begin installation and accept the software license conditions. In Mac® OS X, enter your Administrator name and password, then click OK. continue 5 When you're asked for a software serial number, enter the number printed on the sticker attached to the CD-ROM sleeve. 6 When you see this screen, click the Install button. Scanner Software for Mac OS X 1 Insert the scanner software CD-ROM in the CD-ROM or DVD drive. 2 Double-click the English folder. EPSON CD-ROM icon and then double-click the Click Install 7 Follow the on-screen instructions to install the software. 8 When you're finished, click Quit. 9 If you don't have Acrobat Reader, you can install it from the CD-ROM. Open the Adobe Acrobat Reader folder. Then double-click the Reader Installer icon to install it. Continue with the following instructions to install the scanner software. Scanner Software for Mac OS 8.6 - 9.x 1 Insert the scanner software CD-ROM in the CD-ROM or DVD drive. (If necessary, double-click the EPSON CD-ROM icon to open it.) 2 Double-click . 3 When you see a message asking you to select a language, click English. 4 When the Software Installation screen appears, click Install. 5 Read the license agreement, then click Agree. Click Install 6 When you see the EPSON Scan Installer, click Install. When the EPSON Scan installation is complete, click Restart. Don't remove your CD-ROM. After your Macintosh restarts, you can install the rest of your software. 7 When your Macintosh restarts, double-click the EPSON CD-ROM icon to open it, if necessary, then double-click . Click English. You see this screen: 3 Double-click the EPSON Scan Installer icon. 4 Enter your Administrator name and password and click OK. 5 When you see the EPSON Scan Installer window, click Install, then follow the on-screen instructions. Click Install 6 Double-click the Reference Guide icon. 7 Click Install to install your Scanner Reference Guide. Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software Suite, following the instructions included with each program. Then continue with the instructions under "Connect the Scanner." 3 Connect the Scanner After your software is installed, it's time to get connected. 1 Remove the sticker from the transportation lock. Use a coin to turn the lock clockwise one-quarter turn to unlock the scanner carriage. 2 Remove the sticker from the back of the scanner. Click Install 8 Click Install and follow the on-screen instructions to install each program. After each one is installed, click Quit to continue. Note that EPSON Smart Panel installs in several steps. If you have PDA (Palm) software on your computer, Presto! PixExpress will be installed. 9 Click Exit. The EPSON Product Registration screen appears. 10 Register your scanner as instructed. At the last screen, click Done or close your browser. Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software Suite, following the instructions included with each program. Then continue with the instructions under "Connect the Scanner." continue Remove sticker 3 Connect the cable for the built-in transparency unit to the round connector on the back of the scanner. You may need to raise the scanner cover and twist the cable to insert it. Make sure the arrow faces up continue Turn over