Epson PictureMate Deluxe Using PictureMate Without a Computer - Page 51

Clean Print Head, Print, Maintenance menu.

Get Epson PictureMate Deluxe PDF manuals and user guides View all Epson PictureMate Deluxe manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

4 Make sure Clean Print Head is selected, then press . You see this message: 5 Press the OK button to begin cleaning the print head. Cleaning takes about 40 seconds. PictureMate makes some noise, and you see the following message on the screen: When cleaning is complete, you see a message asking if you want to print a nozzle check pattern. 50 6 To make sure the nozzles are clean, load a sheet of photo paper, then press OK. 7 When you see the message, press Print to print the nozzle check. 8 Check the pattern to see if there are any gaps in the lines. OK Needs Cleaning 9 If there are no gaps, press Back to go back to the Maintenance menu. If there are gaps, press OK to clean the print head again. You may need to clean it two or three times before the nozzles are cleared. You can also turn PictureMate off and wait overnight to allow any dried ink to soften. Then try cleaning the print head again. Note: You can run a nozzle check before you clean the print head. Follow steps 1 and 2 on page 49. Then select Nozzle Check.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
50
4
Make sure
Clean Print Head
is selected, then
press
. You see this message:
5
Press the
OK
button to begin cleaning the print
head. Cleaning takes about 40 seconds.
PictureMate makes some noise, and you see the
following message on the screen:
When cleaning is complete, you see a message
asking if you want to print a nozzle check pattern.
6
To make sure the nozzles are clean, load a sheet
of photo paper, then press
OK.
7
When you see the message, press
Print
to print
the nozzle check.
8
Check the pattern to see if there are any gaps in
the lines.
9
If there are no gaps, press
Back
to go back to the
Maintenance menu.
If there are gaps, press
OK
to clean the print head
again. You may need to clean it two or three times
before the nozzles are cleared.
You can also turn PictureMate off and wait
overnight to allow any dried ink to soften. Then try
cleaning the print head again.
Note:
You can run a nozzle check before you clean the print
head. Follow steps 1 and 2 on page 49. Then select
Nozzle
Check
.
OK
Needs
Cleaning