Epson PictureMate PM-400 User Manual - Page 1

PM-400 Start Here Read these instructions before using your product. 1 Unpack 4 x 6-inch paper Note: Do not open the ink cartridge package until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all protective materials from the product. 2 Open the cover, raise the LCD screen, and turn on the product. 3 To select English as your language, press the OK button. If you want to change the language, press or to select it, then press the OK button. Note: You can change the language later using the product's control panel. For more information, see the online User's Guide. 3 Install ink cartridge 1 Unpack the initial ink cartridge and completely remove the yellow tape only. Caution: Do not remove any other labels or seals, or ink may leak. 2 Turn on and configure 1 Connect the power adapter to the side of the product. Then connect one end of the power cord to the power adapter and the other end to an electrical outlet. 2 Remove the cap and carefully dispose of it. Caution: Do not touch the areas shown below. Doing so may prevent normal operation and printing. Caution: Do not connect to your computer yet.