Epson PictureMate Start Here Card - Page 2
Close the cartridge door. Make sure it is completely, Move the lever to - photo cartridge
UPC - 010343849952
View all Epson PictureMate manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
3 Move the lever to the Release position by sliding it in the direction shown. 4 Shake the photo cartridge a few times in its package, then unwrap the cartridge. To release lever 5 Slide the cartridge straight into the slot, label side up, until it is fully inserted. Push in both sides evenly to make sure it is not crooked. Caution: Make sure both sides of the cartridge are even, or ink may leak. If either side is sticking out, remove the cartridge and reinstall it. Right Wrong 6 Move the lever right to the Lock position. If it does not lock in place, the cartridge is not installed correctly. Release it and try again. 7 Close the cartridge door. Make sure it is completely closed. If the door does not close completely, the cartridge is not installed correctly. Remove it and try again. 8 Flip the handle to the back of PictureMate and all the way down.