Epson PowerLite 1770W Operation Guide - EasyMP Monitor v4.50 - Page 41

An e-mail notifying the operator of a problem/warning/status is issued 41 The details contained in the e-mail message can consist of the following. Message Remedy Internal Error See your User's Guide for more information. Fan error Sensor error Lamp Cover Open Lamp failure at power on* Lamp Error* Supply System Error (Ballast)* High internal temperature error Low air flow error Air filter air flow sensor error Cinema filter error Shutter error Cooling system error (Peltier element) Cooling system error (pump) High-temperature warning Replace Lamp* Lamp error* Lamp failure at power on* Message Remedy Supply System Error See your User's Guide for more information. (Ballast)* Replace Air Filter No Air Filter Low Air Flow Air Flow Sensor Err. Cinema filter warning Shutter warning Clean Air Filter Notice No signal No image signals are being received by the projector. Check the connection status and check that the power for the connected equipment is turned on. Other error Auto Iris Error Stop using the projector, disconnect the power cable from the electrical outlet, and contact Epson. See your User's Guide for more information. Network error (TCP connection error) Check the following items. Check that the projector's power is turned on. Check that the LAN cable is connected. Check that Standby Mode is set to Communication On (or Network On) or Network Monitoring is set to On in the projector's configuration menu. See your User's Guide for more information. Network error Check that the projector has been correctly (ESC/VP.net connected to the network. See your User's Guide for communication error) more information. Network error Check the projector's Monitor Password. (Monitor Password authentication error)