Epson PowerLite 580 Quick Setup - Page 2
Using the remote control, Turn on your equipment, Project over a wired network - focus
View all Epson PowerLite 580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Camera, USB device, or document camera Connect a digital camera, USB flash drive, USB storage device, or Epson DC-06 document camera to the projector's USB-A (flat) port. 5 If you need to focus the image, first slide the switch on the side of the projector to open the air filter cover. Then raise or lower the focus lever to sharpen the image. Using the remote control Make sure the batteries are installed as shown (two AA batteries). Turn projector on and off Choose which source to display 6 The default language of the menu system is English. To select another language, press the Menu button on the remote control. Select Extended and press . Select Language and press . Select your language and press . Press the Menu button to exit the menu system. Project over a wired network If you need to configure the projector for your network, see "Network Configuration" on the back of this sheet. 1 Press the LAN button on the remote control. You see this screen. Access projector menus Change presentation slides (USB only) Turn off projector display and sound Navigate projector menus Control projector volume Get solutions to common problems For more information on using the remote control, see online User's Guide. Turn on your equipment 1 Turn on your computer or video source. 2 Make sure the power cord is connected and plugged into an electrical outlet. 2 Start EasyMP® Network Projection on your computer. Windows 8: Navigate to the Apps screen and select EasyMP Network Projection. Other versions of Windows: Select or Start > Programs or All Programs > EPSON Projector > EasyMP Network Projection. OS X: Double-click the EasyMP Network Projection icon in the Applications folder. 3 Select Advanced Connection Mode and click OK. Status light 3 Press the power button on the projector or remote control. The projector beeps, and the Status light flashes blue and then stays on. Note: To shut down the projector, press the power button twice. 4 If you don't see an image, press the Source Search button on the remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 4 Select the projector you want to connect to, then click Connect. If you don't see the projector you want, click the Automatic search button. 5 If you see a message asking for a keyword, enter the four digits that appear on the LAN standby screen and click OK. Your computer image is projected, with a floating toolbar: When you're done presenting, click Disconnect on the toolbar. Note: To project wirelessly, you need the optional wireless LAN module. For more information about using the projector on a network, see the online User's Guide.