Epson PowerLite 715c Product Support Bulletin(s)

Epson PowerLite 715c Manual

Epson PowerLite 715c manual content summary:

  • Epson PowerLite 715c | Product Support Bulletin(s) - Page 1
    EPSON PRODUCT SUPPORT BULLETIN Date: 8/30/2007 Originator: DS PSB #: PSB.2007.08.001 Authorization: Reference: N/A Total Pages: 1 Product(s): Epson Projectors with an HD-15 VGA Analog/Component Input Subject: Elmo HV-110XG Document Camera and Projector to an Epson projector. Problem: When
  • Epson PowerLite 715c | Product Support Bulletin(s) - Page 2
    was created to inform you of Compact Flash Support for the PowerLite 505c and PowerLite 715c projectors. Cards tested: The following Compact Flash cards and adapters have been tested and added to the Extended Card Support Listing. Compact Card Make/Size Epson 8MB Flash Card Lexar 32MB Flash Card
  • Epson PowerLite 715c | Product Support Bulletin(s) - Page 3
    -AD3 Supporting status Supported Problem and Remarks countermeasure Supported Supported Supported Supported Supported Supported Supported Supported Supported Partially supported Partially supported Supported Supported Supported Partially supported Partially supported Supported Supported Supported
  • Epson PowerLite 715c | Product Support Bulletin(s) - Page 4
    Technology EPSON EPSON/Simple Technology EPSON/Simple Technology EPSON/Simple Technology EPSON I-O DATA EPSON MELCO - - 60045400 60045400 CompactFlash Platform Adapter 60045400 RCF-A - Supporting status Supported Supported Supported Supported Supported Partially supported Supported Problem and
  • Epson PowerLite 715c | Product Support Bulletin(s) - Page 5
    EPSON PRODUCT SUPPORT BULLETIN Date: PSB #: Reference: Product(s): Subject: 03/27/2002 PSB.2002.03.004A TI01-35e, Rev. A PowerLite 715c and PowerLite 505c before downloading or installing the update. Open EMP SlideMaker, click on Help and click on "About EMP SlideMaker". If you should see the
  • Epson PowerLite 715c | Product Support Bulletin(s) - Page 6
    Reboot the system after the update is complete in order for the changes to take effect. Page 2 of 2
  • Epson PowerLite 715c | Product Support Bulletin(s) - Page 7
    EPSON PRODUCT SUPPORT BULLETIN Date: PSB #: Reference: Product(s): Subject: 06/26/2001 PSB.2001.06.006 None PowerLite 715c and PowerLite 505c Removing the Projector USB files and devices Originator: JAM Authorization: Total Pages: 4 This bulletin was created to inform you how to remove the files
  • Epson PowerLite 715c | Product Support Bulletin(s) - Page 8
    Control Panel, double click on the SYSTEM icon. 2.) On the System Properties screen, click on the tab Device Manager. Double click on the DISK DRIVES icon. Refer to Image # 2 below. 3.) Click on the EPSON ELP/EMP-715 so, restart the system and USB projector support will be completely removed from the
  • Epson PowerLite 715c | Product Support Bulletin(s) - Page 9
    Image # 2 - Screen shot of... Device Manager/Disk drives Highlight and remove the "EPSON ELP/EMP-715 device". Image # 3 - Screen shot of... Device Manager/Human Interface Devices Highlight and remove the "USB Human Interface Device". Page 3 of 4
  • Epson PowerLite 715c | Product Support Bulletin(s) - Page 10
    Image #4 - Screen shot of... Device Manager/Universal Serial Bus controllers Highlight and remove the "ELP/EMP-Series wdm Storage" and "Generic USB Hub". Page 4 of 4
  • Epson PowerLite 715c | Product Support Bulletin(s) - Page 11
    EPSON PRODUCT SUPPORT BULLETIN Date: PSB #: Reference: Product(s): Subject: 05/18/2001 PSB.2001.05.002 None PowerLite 715c and PowerLite 505c USB drivers for the PowerLite 715c and PowerLite 505c projectors. Note: You will can be installed manually. A warning message is: ELP\EMP-Series wdm storage
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11

Page 1 of 1
EPSON
P
RODUCT
S
UPPORT
B
ULLETIN
Date:
8/30/2007
Originator:
DS
PSB #:
PSB.2007.08.001
Authorization:
Reference:
N/A
Total Pages:
1
Product(s):
Epson Projectors with an HD-15 VGA Analog/Component Input
Subject:
Elmo HV-110XG Document Camera and Projector Compatibility
This bulletin was created to inform you of an operational issue with the Elmo HV-110XG
Document Camera when initially connected to an Epson projector.
Problem:
When attempting to use the Elmo HV-110XG Document Camera connected via the VGA HD15
connection to display content from its document bed.
When connected to the projector, the
projector displays only the
Blue Screen - No Signal
message and will blink off and on or
display just the Blue Screen - No Signal message.
When a computer is connected to the Elmo
HV-110XG Document Camera and switched to Pass-Through mode, the computer image is
displayed correctly by the projector.
When switching back to the document table source of the
Elmo HV-110XG Document Camera, the problem returns. The Elmo HV-110XG Document
Camera puts out a Progressive Scan 20fps signal to the projector's VGA Analog port.
This
signal is detected at 15 kHz Vertical and 291.8 kHz Horizontal frequencies which are beyond
projector sync specifications.
Solution:
With the Elmo HV-110XG Document Camera powered on and connected to the projector via
the VGA computer cable, access the
Computer1/Computer2
setting in the projector menu
system and select the
Component
setting within the appropriate connection. This will allow
the Elmo HV-110XG Document Camera and projector to sync and the projector to display the
image of the document camera bed and its contents.
However, the image will have a pink
cast.
To eliminate the pink cast, change the projector setting from Component to
RGB
then to
Auto
and exit from the menu
.
The projected image will now look normal.
This will now allow
the Elmo HV-110XG Document Camera to sync and display the image properly to any other
connected Epson projector without having to change the projector settings.