Epson PowerLite 9300i Operation Guide - EMP Monitor v4.30 - Page 34
Procedures for new timer settings, Timer, Enable, Disable
View all Epson PowerLite 9300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Using the control functions Procedures for new timer settings Procedure A Click "Add" on the timer setting window. The following window is displayed and the new timer settings are applied. 34 B After completing the timer settings, click "OK". The timer settings that have been made will be registered and they can be checked in the displayed timer list. You can enable and disable all of the timer settings that have been registered. Select Timer - Enable or Disable from the Tool menu. At Operation, you can carry out the operations of turning the power on and off and switching the input sources, similarly for the control buttons on the main window. If you set the input source switching, the projector's power will turn on at the timer start time even if it is not on at the time. Because of this, it is not necessary to make two separate timer settings for turning the power on and switching the input source.