Epson PowerLite 9300i Quick Start - Page 1
Epson PowerLite 9300i - PowerLite 9300NL Multimedia Projector Manual
View all Epson PowerLite 9300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
TART S HERE Connect the projector to your notebook 1 Locate the required cables: Power cord Computer cable 2 Connect the computer cable to the Computer 1 port on the projector. EPSON® PowerLite® 9300i Quick Setup 3 Connect the other end to your notebook's video-out or monitor port. NOTE: If your notebook has a DVI connector, you need to either use a DVI-to-VGA adapter with the included computer cable (see your computer's documentation), or purchase an optional DVI cable (for a higher-quality image). See your User's Guide. 4 Connect the power cord to the projector, then plug the other end into a grounded electrical outlet. Turn on your equipment 1 Turn on your notebook. 2 Remove the projector's lens cover. Follow these instructions to connect the projector to your notebook. For other setup options, see your User's Guide. Adjust the image 1 If you've turned on your notebook and you don't see an image, press the Computer/DVI button on the projector to select the image source. NOTE: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 Adjust the sharpness, size, and height of the image: 3 Make sure the power light is orange and not flashing. Power light is orange and not flashing Power button 4 Press the Power button to turn on the projector. CAUTION: Before unplugging the projector... To shut down the projector properly: 1. Press the Power button twice. Let the projector cool while the power light flashes orange (about 30 seconds). 2. Once the light stops flashing and stays on, it's safe to unplug the projector. Never unplug the projector when the power light is green or flashing orange. Select an image source Focus to sharpen the image Zoom to adjust the image size Lens Shift to adjust the image height 3 If your image looks like or , you've placed the projector off to one side of the screen at an angle. Place it directly in front of the center of the screen, facing the screen squarely. 4 If your image looks like or , use the Keystone buttons to square up the image. Turn over