Epson PowerLite 97H Operation Guide - EasyMP Multi PC Projection - Page 18
Network, Network Configuration, Wired LAN, Connect a LAN cable to the projector.
View all Epson PowerLite 97H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
1. Contact your network administrator and check that DHCP is available under the current network environment. Note: If DHCP is not available, write down the following values that are available for your projector. • IP Address • Subnet Mask • Gateway Address 2. Connect the computer to the network. Note: To set up a network connection, if necessary, see the documentation supplied with your computer or network adapter. 3. Connect a LAN cable to the projector. 4. Turn on the projector. 5. Press the Menu button on the remote control or the control panel, select the Network menu, and select Network Configuration. 6. Select Wired LAN. A screen like one of the following is displayed. 7. Select IP settings as necessary. • DHCP is available: Set DHCP to On. 18