Epson PowerLite Pro G6450WU Operation Guide - EasyMP Network Updater - Page 34
Error Status, Error Monitor Password Authentication Error
View all Epson PowerLite Pro G6450WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Related tasks Canceling an Update Schedule Updating the Firmware Error Status When an error occurs while updating the firmware, the schedule status displays the error status. Check the type of error and then follow the instructions here to clear the error. If you cannot solve the problem, contact your network administrator. Types of Error Remedy Error (The projector is not responding.) Make sure the projector is on or the projector's Standy Mode is set to Communication On. Error (The network connection has been lost.) Check the network settings on the computer and the network settings on the projector. Make sure the projector network setting has not been changed due to the DHCP server settings. Error (An error occurred when reading the data.) Select the correct projector firmware file or download the firmware again. Error (An error occurred when writing the data.) Make sure you select the correct projector firmware and the projector settings are correct, and then try updating the firmware again. Error (Projector Internal Error) Restart the projector and try updating the firmware again. Error (Monitor Password Authentication Error) Check the Monitor Password setting is correct. Error (Other) If restarting the projector or EasyMP Network Updater does not solve the problem, contact Epson as described in your projector User's Guide. Parent topic: Solving Problems 34