Epson PowerLite S3 Product Information Guide

Epson PowerLite S3 Manual

Get Epson PowerLite S3 PDF manuals and user guides View all Epson PowerLite S3 manuals
Add to My Manuals
Save this manual to your list of manuals

Epson PowerLite S3 manual content summary:

  • Epson PowerLite S3 | Product Information Guide - Page 1
    12.5 mm) × 3 Lens F=1.4 mm, f=16.6 mm Focus adjustment Manual Zoom ratio Digital zoom 1.0 to 1.35, lens at maximum size Resolution Power consumption 135W Lamp life About 2000 hours (high brightness) About 3000 hours (low brightness) Part number V13H010L33 3/05 Epson PowerLite S3 Projector
  • Epson PowerLite S3 | Product Information Guide - Page 2
    100 to 120 VAC, 1.0 to 2.2 A 200 to 240 V model: 200 to 240 VAC, 1.3 A Power consumption Operating: 195W Standby: 4.0W Environmental Temperature (non-condensing) Operating: 41 to 95° F (5 to 35 However, not all functions may be supported with such signals. 2 - Epson PowerLite S3 Projector 3/05
  • Epson PowerLite S3 | Product Information Guide - Page 3
    Epson PowerLite S3 Projector Positioning the Projector Follow these guidelines to get the best results when projecting: ❏ Place the projector on a sturdy, level surface, between 3 and 40 feet from the screen. ❏ Make sure there is plenty of space for ventilation around and under the projector. ❏
  • Epson PowerLite S3 | Product Information Guide - Page 4
    Epson PowerLite S3 Projector Turning the Projector On and Off Once you've connected the projector to your computer or other equipment, follow these instructions to turn it on and display an image: 1. Make sure the power is turned off for the projector and any sources connected to it. 2. Remove the
  • Epson PowerLite S3 | Product Information Guide - Page 5
    while the power light is flashing orange because it may cause problems with the projector. 5. Replace the lens cover. If you're using a Macintosh® notebook with Mac OS® X: 1. Select System Preferences from the Apple® menu and click Displays. 2. Click Detect Displays. Click here Troubleshooting If
  • Epson PowerLite S3 | Product Information Guide - Page 6
    Epson PowerLite S3 Projector If you're using a Macintosh notebook with Mac OS 9.x or earlier: 1. From the Apple menu, select Control Panels, then still out of focus, you can increase the clarity by pressing the Auto button on the remote control. See page 8. 6 - Epson PowerLite S3 Projector 3/05
  • Epson PowerLite S3 | Product Information Guide - Page 7
    See the User's Guide for more information. Note: You can also increase computer image clarity by pressing the Auto button on the remote control to optimize the tracking, sync, and position settings. Turn off E-Zoom and A/VMute before using the Auto button. 3/05 Epson PowerLite S3 Projector - 7
  • Epson PowerLite S3 | Product Information Guide - Page 8
    Epson PowerLite S3 Projector Selecting the Color Mode There are seven color modes. The mode changes each time projector and the connected source to sRGB. ❏ Game Excels at emphasizing dark gradations. Ideal for playing video games the tracking and sync settings manually. Selecting the Aspect Ratio
  • Epson PowerLite S3 | Product Information Guide - Page 9
    a wall. If the air filters are blocked, clean or replace them. After checking, press the Power button to turn the power back on. If this does not solve the problem, stop using the projector, disconnect the power cable from the wall outlet, and contact Epson. There is a lamp timer failure or the lamp
  • Epson PowerLite S3 | Product Information Guide - Page 10
    about the current projector and lamp settings. ❏ Reset restores the factory defaults to all the projector settings and lets you reset the lamp timer when you've replaced the projector's lamp. Changing after items which select a setting or lead to a sub menu. 10 - Epson PowerLite S3 Projector 3/05
  • Epson PowerLite S3 | Product Information Guide - Page 11
    Epson PowerLite S3 Projector Replacing Remote Control Batteries When the batteries run out, follow the steps below to replace them. The remote requires 2 AAA batteries. Note: Make sure you read the Safety Instructions in the User's Guide before handling the batteries. 1. Push in the battery cover
  • Epson PowerLite S3 | Product Information Guide - Page 12
    time to cool down after turning off the power, wait for about one hour. 1. After you turn off the projector's power, and it beeps twice, disconnect the power cable. 2. Wait until the lamp has cooled down, then remove the lamp cover from the base of the projector. 12 - Epson PowerLite S3 Projector
  • Epson PowerLite S3 | Product Information Guide - Page 13
    one. You can do this using the configuration menu. Note: Do not reset the lamp operating time except after the lamp has been replaced, otherwise the lamp replacement period will not be indicated correctly. 1. Connect the power cable and turn on the projector. 3/05 Epson PowerLite S3 Projector - 13
  • Epson PowerLite S3 | Product Information Guide - Page 14
    ELPDA01 ELPKS35-S ELPKS43 ELPKS54 V12H162020 ELPSL01 Part Name Replacement lamp Air filter set (2) 50" Portable screen Epson PowerLite S3 Projector Quick Setup Poster CD-ROM containing the Epson PowerLite S3 User's Guide Available on the Epson Insider Website only 14 - Epson PowerLite S3 Projector
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
Epson PowerLite S3 Projector
3/05
Epson PowerLite S3 Projector - 1
Projector Parts
Projector Specifications
General
Type of display
Poly-silicon Thin Film Transistor (TFT)
active matrix with Micro Lens Array
Size of liquid
crystal panels
Diagonal: 0.5 inch (12.5 mm)
×
3
Lens
F=1.4 mm, f=16.6 mm
Focus adjustment
Manual
Zoom ratio
Digital zoom 1.0 to 1.35, lens at
maximum size
Resolution
800
×
600 pixels (native format)
SXGA (1280
×
1024) max (resized)
Number of pixels
480,000
×
3
Brightness
1600 (high brightness) ANSI lumens
1400 (low brightness) ANSI lumens
Contrast ratio
500:1
EPSON Control
Code
ESC/VP 21 (available online)
Image size
(diagonal)
30 to 300 inches (0.9 to 12.1 m)
Projection distance
2.9 to 29.5 ft (0.9 to 9.0 m), Wide mode
3.9 to 39.7 ft (1.2 to 12.1 m), Tele mode
Projection methods
Front, rear, upside-down (ceiling
mount)
Sound output
1W monaural
Optical aspect ratio
4:3 (horizontal : vertical)
Keystone correction
angle
±
30° vertical
±
20° vertical at 16:9 aspect ratio
Keystone correction
ratio
9.6:1 offset
Supported video
interface standards
NTSC, NTSC4.43, PAL, PAL-M,
PAL-N, PAL60, SECAM
Projection Lamp
Type
UHE (Ultra High Efficiency)
Power consumption
135W
Lamp life
About 2000 hours (high brightness)
About 3000 hours (low brightness)
Part number
V13H010L33
Lens
cover
Focus ring
Infrared
receiver for
remote control
Control panel
Foot
Foot
lever
Ventilation outlets
Lamp cover
Computer/Component Video port
S-Video port
Video port
Audio
input
Monitor out port
AC
inlet
Speaker
Infrared receiver for
remote control
USB port
(not for projecting)
Rear
adjustable
foot
Air filter
(air intake vent)
Ceiling mount holes
Foot
Foot lever