Epson Pro L1300U Users Guide - Page 40
Connecting to a Component-to-BNC Video Source, ports, usually labeled
View all Epson Pro L1300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Note: The projector converts the digital audio signal sent from your video source into a mono analog signal for the internal speaker or a stereo analog signal if you are connecting to external speakers. Note: If you have problems hearing audio through the HDMI connection, you can use the Audio3 port instead to play sound. Connect one end of an optional 3.5 mm stereo mini-jack audio cable to the projector's Audio3 port and the other end to your computer's audio out port. Then select Audio3 for the HDMI Audio Output setting in the Extended menu. Parent topic: Connecting to Video Sources Related references Projector Setup Settings - Extended Menu Connecting to a Component-to-BNC Video Source If your video source has component video ports, you can connect it to the projector using an optional component-to-BNC video cable. Depending on your component ports, you may need to use an adapter cable along with a component video cable. 1. Connect the component connectors to your video source's color-coded component video output ports, usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors to your component video cable. 2. Connect the BNC connectors to the projector's R/Cr/Pr, G/Y, B/Cb/Pb ports. Parent topic: Connecting to Video Sources Connecting to a Component Video Source If your video source has component video ports, you can connect it to the projector using an optional component-to-VGA video cable. Depending on your component ports, you may need to use an adapter cable along with a component video cable. 40