Epson Stylus Photo 1270 Product Information Guide - Page 10

Cleaning the Printer, Transporting the Printer, Related Documentation - price

Page 10 highlights

EPSON Stylus Photo 1270 Cleaning the Printer To keep your printer working at its best, you should clean it several times a year. Follow these steps: 1. Turn off the printer and wait for the Ppower light to go out. 2. Unplug the power cord and disconnect the printer cable. 3. Remove all the paper from the sheet feeder. 4. Clean the exterior of the printer with a soft, damp cloth. 5. Clean ink out of the printer's interior with a soft, damp cloth. Don't touch the gears inside the printer. Never use a hard or abrasive brush, or alcohol or thinner for cleaning; they can damage the printer components and case. Don't get water on the printer components and don't spray lubricants or oils inside the printer. Transporting the Printer If you move your printer some distance, you need to prepare it for transportation in its original box or one of a similar size. To avoid damage, always leave the ink cartridges installed when transporting the printer. Be sure to remove the tape used in step 4 after installing the printer in its new location. Follow these steps: 1. Turn on the printer, wait until the print head locks in the far right position, then turn off the printer. 2. Unplug the power cord from the electrical outlet. Then disconnect the printer cable from the printer. 3. Remove any paper from the printer and remove the paper support. 4. Open the printer cover. Secure the ink cartridge holder to the printer with tape as shown, then close the printer cover. Tape the ink cartridge holder to the printer case 5. Push in the output tray extensions and close the tray. 6. Repack the printer and attachments in the original box using the protective materials that came with it. See the unpacking sheet that was packed with your printer. Be sure to keep the printer level as you transport it. After transporting the printer, remove the tape securing the print head and test your printer. If you notice a decline in print quality, clean the print head (see page 8); if output is misaligned, align the print head (see page 9). Related Documentation TM-870/1270 PL-SP1270 CPD-9806 CPD-9807 CPD-9821 CPD-9820 EPSON Stylus Photo 870/EPSON Stylus Photo 1270 Service Manual EPSON Stylus Photo 1270 Parts Price List EPSON Stylus Photo 870/1270 Printer Basics EPSON Stylus Photo 870/1270 Start Here EPSON Stylus Photo 870/1270 Unpacking the Printer EPSON Stylus Photo 1270 printer software CD-ROM 10 - EPSON Stylus Photo 1270 2/00

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

EPSON Stylus Photo 1270
10 -
EPSON Stylus Photo 1270
2/00
Cleaning the Printer
To keep your printer working at its best, you should clean it
several times a year. Follow these steps:
1.
Turn off the printer and wait for the
P
power light to go
out.
2.
Unplug the power cord and disconnect the printer cable.
3.
Remove all the paper from the sheet feeder.
4.
Clean the exterior of the printer with a soft, damp cloth.
5.
Clean ink out of the printer’s interior with a soft, damp
cloth.
Don’t touch the gears inside the printer.
Never use a hard or abrasive brush, or alcohol or thinner
for cleaning; they can damage the printer components
and case.
Don’t get water on the printer components and don’t
spray lubricants or oils inside the printer.
Transporting the Printer
If you move your printer some distance, you need to prepare it
for transportation in its original box or one of a similar size.
To avoid damage, always leave the ink cartridges
installed when transporting the printer.
Be sure to remove the tape used in step 4 after installing
the printer in its new location.
Follow these steps:
1.
Turn on the printer, wait until the print head locks in the
far right position, then turn off the printer.
2.
Unplug the power cord from the electrical outlet. Then
disconnect the printer cable from the printer.
3.
Remove any paper from the printer and remove the paper
support.
4.
Open the printer cover. Secure the ink cartridge holder to
the printer with tape as shown, then close the printer cover.
5.
Push in the output tray extensions and close the tray.
6.
Repack the printer and attachments in the original box
using the protective materials that came with it. See the
unpacking sheet that was packed with your printer.
Be sure to keep the printer level as you transport it.
After transporting the printer, remove the tape securing the
print head and test your printer. If you notice a decline in
print quality, clean the print head (see page 8); if output is
misaligned, align the print head (see page 9).
Related Documentation
TM-870/1270
EPSON Stylus Photo 870/EPSON Stylus
Photo 1270 Service Manual
PL-SP1270
EPSON Stylus Photo 1270 Parts Price
List
CPD-9806
EPSON Stylus Photo 870/1270
Printer
Basics
CPD-9807
EPSON Stylus Photo 870/1270
Start Here
CPD-9821
EPSON Stylus Photo 870/1270
Unpacking the Printer
CPD-9820
EPSON Stylus Photo 1270 printer
software CD-ROM
Tape the ink cartridge holder
to the printer case