Epson Stylus Pro 10000 - Archival Ink User Manual

Epson Stylus Pro 10000 - Archival Ink - Stylus Pro 10000 Print Engine Manual

Get Epson Stylus Pro 10000 - Archival Ink - Stylus Pro 10000 Print Engine PDF manuals and user guides View all Epson Stylus Pro 10000 - Archival Ink manuals
Add to My Manuals
Save this manual to your list of manuals

Epson Stylus Pro 10000 - Archival Ink manual content summary:

  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 1
    EPSON Stylus® Pro 10000 Printer Guide
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 2
    EPSON Stylus® Pro 10000 Series PRINTER GUIDE ®
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 3
    information as applied to other printers. Trademarks EPSON, EPSON Stylus, ESC/P, and Micro Piezo are registered trademarks of SEIKO EPSON CORPORATION. DX3, PhotoEnhance, SelecType, and EPSON Archival are trademarks and EPSON Preferred is a service mark of Epson America, Inc. General Notice: Other
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 4
    and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. For European Users This product conforms
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 5
    Manuals 3 Using This Printer Guide 3 Warnings, Cautions, and Notes 4 Where To Get Help 4 Macintosh System Requirements 5 Windows System Requirements 6 ENERGY STAR Compliance 7 Important Safety Instructions 7 Ink Cartridge Safety Instructions 8 1 Setting Up the Printer Installing the Ink
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 6
    Roll Paper Belts 2-7 Removing Paper from the Spindle 2-8 Cutting Paper Manually with the Built-in Cutter 2-9 Printing Trim Lines 2-9 Using Cut Sheet Printing 3-16 Checking Printer Status 3-17 Selecting Configuration Options 3-18 4 Printing with EPSON Drivers for Windows Choosing Basic
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 7
    6 Maintaining and Transporting the Printer Running a Cleaning Cycle 6-1 Using the Head Cleaning Utility 6-1 Cleaning the Print Head Using the Control Panel 6-4 Aligning the Print Head 6-4 Aligning the Print Head from the Control Panel 6-5 Replacing Ink Cartridges 6-7 Replacing the Paper Cutter
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 8
    Problems 7-9 Clearing Paper Jams 7-11 Uninstalling and Reinstalling the Printer Software 7-12 Macintosh 7-12 Windows 7-13 A Specifications Printing A-1 Environmental A-2 Mechanical A-2 Electrical A-3 Initialization A-3 Safety Approvals A-3 Paper A-4 Printable Area A-5 Ink Cartridges
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 9
    . The printer may also be equipped with an optional 44-inch auto take-up reel that is compatible with most lamination systems and lets you run long print jobs unattended. For complete flexibility, the EPSON Stylus Pro 10000 also supports many third-party RIPs and comes with custom EPSON drivers and
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 10
    , install it in the optional interface slot on the back of the printer. See the EpsonNet Internal Print Server Administrator's Manual for instructions. For network connectivity, you must also install the EPSON Stylus Pro 10000 printer software on all client systems. See page 1-13 (Macintosh) or page
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 11
    The EPSON Stylus Pro 10000/10000CF Unpacking and Assembly Guide describes how to unpack and assemble the printer. • The EPSON Stylus Pro 10000 Quick Reference Guide provides a handy summary of procedures for daily use and printer maintenance-loading paper, replacing ink cartridges, running cleaning
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 12
    4 | Introduction Chapter 7 provides troubleshooting tips and solutions for problems involving print quality, printer operation, and paper handling. Appendix A provides the technical specifications for your printer, media, and ink cartridges. An Index is included at the end of the book. Warning
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 13
    EPSON Support at http://support.epson.com. At this site, you can download drivers and other files, look at product documentation, access troubleshooting information, and receive technical advice through e-mail. You can purchase ink cartridges Requirements To use your printer in either a standalone
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 14
    If you are not using Photo Printing Accelerator in your driver (see page 4-3 for details), or if you are using a software or hardware RIP, you must have a Pentium III 700 MHz or higher processor with 512MB RAM to keep the printer running at full engine speed. Caution Using an improperly shielded
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 15
    to reduce air pollution caused by power generation. Important Safety Instructions Before using your printer, read the following safety instructions to make sure you use the equipment safely and effectively. • Turn off and unplug the printer before cleaning. Clean with a damp cloth only. Do not spill
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 16
    explained in the documentation, do not attempt to service the printer yourself. Opening or removing those covers that are marked instructions. Ink Cartridge Safety Instructions • Do not put your hand inside the printer or touch the cartridges during printing. • To avoid damaging the printer
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 17
    the ink cartridges or try to refill them. This could result in damage to the print head. • Install the ink cartridge immediately after you remove it from its package. Leaving the cartridge unpacked for a long time before use may result in reduced print quality. • Do not use an ink cartridge beyond
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 18
    10 | Introduction 10
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 19
    you install be the ones that came with the printer. The chips on these cartridges are programmed to cause the printer to initialize as the correct ink model: Archival Ink or Photographic Dye Ink. Ink cartridges that you later buy from EPSON do not have the same program on their chips. Before
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 20
    Be careful not to touch the green computer chip on one side of the cartridge. This may affect normal operation and printing. 4. Locate the package for the black ink cartridge and open it. Remove the cartridge. If you're installing Archival Ink cartridges, shake the cartridge gently, as shown. 1-2
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 21
    set lever, or open the lower cover or ink compartment cover while the Pause light is flashing. 7. Repeat steps 3 through 6 for the other ink cartridges. When you're done, close the ink compartment cover. The printer begins charging the advanced ink delivery system. The Pause light on the control
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 22
    attaching the roll to the paper spindle, inserting the spindle in the printer, and loading the paper for printing. Before you begin, remove the covering. Then locate one of the paper spindles that was packed in your printer box. Attaching the Roll to the Paper Spindle Follow these steps to attach
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 23
    the end of the roll you're not using. See page 2-7 for more information. Inserting the Paper Spindle in the Printer Follow these steps to insert the spindle in the printer: 1. Open the roll paper cover. Position the spindle so that the white end (with the wide fixed paper stop) is on
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 24
    Note 3. Place the black end of the spindle into the corresponding left mounting bracket inside the printer. When you remove the spindle, lift the left end out first. See page 2-8 for details on removing paper from the spindle. Loading the Roll Paper
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 25
    | 1-7 Caution To avoid damaging the printer, never move the paper set lever while the Operate or Pause light is flashing. 2. Pull the paper set lever out, to the released position. The
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 26
    1-8 | Setting Up the Printer 4. Pull the paper down so it extends all the way through the slot. 5. Turn the roll back to remove the slack. Then align the paper with the two rows of holes at the paper exit. 1-8
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 27
    PAUSE BUTTON appears briefly on the control panel display. To avoid damaging the printer, never move the paper set lever while the Operate or Pause light is display. (Even if you don't press Pause, the paper and printer will move into printing position automatically after 10 seconds.) Running a
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 28
    : If dots are missing from the pattern, as shown below, you need to run a cleaning cycle. See page 6-1 for instructions. If the nozzle check fails to print, make sure your ink cartridges are correctly installed. Then run a cleaning cycle, as described on page 6-1. If this doesn't work, turn off the
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 29
    Print Server-network connectivity for all systems (with purchase of the optional 10/100 BaseT Ethernet Type B interface card) For instructions on connecting the printer using EpsonNet Print Server, see the documentation that came with your card. For all other interfaces, see the appropriate section
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 30
    on both sides. 3. Plug the other end of the cable into the computer's parallel port. Connecting to the IEEE 1394 (FireWire) Port To connect the printer to the IEEE 1394 port, you need a standard shielded IEEE 1394 cable. Follow the steps below to connect the
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 31
    on your Macintosh and your printer. 2. Insert the printer software CD-ROM in a CD-ROM or DVD drive. Double-click the EPSON CD-ROM to open its window. 3. Double-click the icon for your model: Printer Driver Installer Photographic Dye or Printer Driver Installer EPSON Archival Ink. 4. Double-click the
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 32
    the AppleTalk setting Active. SPro 10000 identifies the driver for the Photographic Dye Ink model, and SPro 10000CF identifies the driver for the Archival Ink model. 6. Click the Install button, then click Continue on the next screen. 7. Follow the instructions to install your software and select
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 33
    , and use the EPSON Monitor3 utility to manage print jobs. 11. Close the Chooser. For instructions on using your printer software, see Chapter 3. Installing Printer Software for Windows After connecting the printer to your computer, you need to install the printer driver and utilities on your
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 34
    7. 4. Double-click the driver installation for your printer model. If you have the Photographic Dye Ink model, double-click Install Stylus Pro 10000 With Photographic Dye Technology. If you have the Archival Ink model, double-click Install Stylus Pro 10000 With Archival Ink Technology. 5. Click OK
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 35
    Up on a Macintosh Network This section explains how to set up the Stylus Pro 10000 as a shared printer on an AppleTalk network. First install the printer software on every computer that will need to access the printer, as described on page 1-13. Then configure the host Macintosh (the computer
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 36
    , background printing should be turned off for all client computers. 2. If you're prompted for a password, enter the password for the printer and click OK. 3. Make sure Background Printing is turned off. Then close the Chooser. For instructions on using your printer software, see Chapter 3. 1-18
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 37
    configure the client computers to connect to it. Configuring the Host Computer Perform these steps on the computer to which you connected the printer: 1. Click Start, point to Settings, then click Control Panel. 2. Double-click the Network icon. 3. Click the File and Print Sharing button. You see
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 38
    for Windows 95). You see a dialog box similar to the following: 8. Select Shared As, enter the printer information as needed, then click OK. Configuring the Client Computers Perform these steps on every computer that will need to access the printer: 1. Click Start, point to Settings, and click
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 39
    Click Network printer, then click Next. 5. Click Browse. 6. Double-click the icon of the host computer (directly connected to the printer). Then click the printer's icon. 7. Click OK and follow the messages on the screen to complete configuration. For instructions on using your printer software, see
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 40
    File menu. You see a window like the following: 3. Click the Shared (Windows NT) or Shared as (Windows 2000) button and enter a share name for the printer. Don't select any drivers from the Alternate Drivers (Windows NT) or Additional Drivers (Windows 2000) list. 4. Click OK. 1-22
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 41
    | 1-23 Configuring the Client Computers Perform these steps on every computer that will need to access the printer: 1. Click Start, point to Settings, and click Printers. 2. Right-click your printer icon, then click Properties (Document Defaults for Windows NT). 3. Click the Ports tab to display the
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 42
    box, type the appropriate information for your system using the syntax below, then click OK: \\name of computer connected to the printer\name of the shared printer 7. In the Printer Ports dialog box, click Close. 8. On the Ports screen, make sure the new port is added and its checkbox is selected
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 43
    check before you align the print head. This ensures that the print head alignment patterns print correctly. Aligning the Print Head Before you use the printer, you should align the print head to ensure accurate, clean printouts. You can run the Print Head Alignment utility at this point to check
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 44
    Macintosh: Click the utility button. Windows: Click the Utility tab. 4. Click the Print Head Alignment button. 5. Follow the messages on your screen. The printer prints the head alignment patterns. Two rows consisting of sets of 15 bars are printed across the width of the paper. 6. Examine the first
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 45
    row #1 to select the number for the best aligned bar. Note You may have to realign the print head several times before you use the printer for the first time. 9. Repeat steps 6 through 8 for row #2. 10. If you chose a bar that did not consistently have the smallest gaps, click the Realignment
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 46
    1-28 | Setting Up the Printer 1-28
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 47
    The EPSON Stylus Pro 10000 prints on a variety of media, including roll paper and cut sheets up to 44 inches wide. You can also use heavy stock, including posterboard up to 59 mil (1.5 mm) thick. This chapter includes the following information: • Selecting media that meet your printer's requirements
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 48
    , ensure high-quality results. The following tables list the product codes for the EPSON media available for your printer. Stylus Pro 10000 Photographic Dye Ink model media product codes Paper type Roll sizes Sheet sizes Presentation Matte Paper 44-inch roll: S041220 - 36-inch roll: S041221
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 49
    Paper and Other Media | 2-3 Stylus Pro 10000 Photographic Dye Ink model media product codes (cont (A3): S041142 11 × 17" (B): S041156 13 × 19" (SB): S041143 8.3 × 23.4" (Panoramic): S041145 Photo Quality Ink Jet - Paper 11 × 17" (B): S041070 13 × 19" (SB): S041069 16.5 × 23.4" (A2): S041079 17 ×
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 50
    2-4 | Handling Paper and Other Media Note Check the EPSON Pro Graphics web site (http://prographics.epson. com) or your authorized EPSON dealer for new papers and other media that may be available. Stylus Pro 10000 Archival Ink model media product codes Paper type Roll sizes Sheet sizes
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 51
    Handling Paper and Other Media | 2-5 Stylus Pro 10000 Archival Ink model media product codes (cont.) Paper type Roll sizes Sheet sizes Premium Luster spindle *** Not available at time of printing. For product codes and availability, visit the EPSON Pro Graphics web site at http://prographics
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 52
    from the EPSON Pro Graphics web site (http://prographics.epson. com) or your authorized EPSON dealer. Using Roll Paper The printer comes with Manually switching from one paper roll to another is a simple process. For instructions on attaching roll paper to a spindle and loading it in the printer,
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 53
    . Using the Roll Paper Belts To keep the paper wound when you're not printing, use one of the roll paper belts included with your printer. 2-7
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 54
    you're not using the roll paper belt, keep it wound around the end of the spindle. roll paper belt Caution To avoid damaging the printer, never move the paper set lever while the Operate or Pause light is flashing. To avoid damaging the spindle, do not tap the end of
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 55
    media can damage the built-in cutter. Follow these steps to cut manually with the built-in cutter: 1. If the paper is not positioned . 5. Press the SelecType button to exit the Printer Setting menu. If you're using the EPSON printer driver, you can also specify trim lines through your print
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 56
    2-7. If you're using stock more than 19 mil (0.5 mm) thick, see page 2-11 for instructions. You will not be able to follow the "autoload" procedure described in this section. Before you start, make sure the printer is on and roll paper is not loaded for printing. Then follow these steps: 1. Make
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 57
    28 × 40 inches (B1), such as EPSON Posterboard Semigloss. Follow these instructions when you print on posterboard or other media more than 19 mil (0.5 mm) thick. 1. Set the paper hammock to catch your printouts in front of the printer. See page 2-14 for instructions. 2. Make sure that no other paper
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 58
    2-12 | Handling Paper and Other Media Note If you're using stock more than 39 inches long, load it long edge first (in landscape orientation). 5. Feed the posterboard into the paper slot until the bottom edge of the board rests behind the open lower cover. 6. Align the board with the scale on the
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 59
    PAUSE BUTTON appears on the control panel display. To avoid damaging the printer, never move the paper set lever while the Operate or Pause light adjust the platen gap setting. Normally, the AUTO setting allows the printer to adjust automatically. However, if print quality is not satisfactory when
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 60
    change this setting back to AUTO. Using the Paper Hammock The paper hammock (also called the paper basket) is a cloth sheet that attaches to your printer and catches your printouts as they come out. This keeps the printouts from getting dirty or wrinkled. You can set up the hammock either to
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 61
    Handling Paper and Other Media | 2-15 2. Slide the upper hammock guides all the way in. Then fully extend the Note lower hammock guides, so that they rest on the floor. Make sure the surface of the hammock is stretched tight. If there is any slack, the paper may
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 62
    Paper and Other Media Catching Printouts Under the Printer Follow these steps to set up the hammock under the printer: 1. Unhook the hammock rings from the upper hammock hooks. 2. Extend the upper hammock guides all the way out. Then extend the lower hammock guides out to their full length. 2-16
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 63
    inches, you can set up your hammock so that it takes up less space. Follow these steps: 1. Slide the lower hammock guides all the way in, and extend the upper hammock guides out to their full length. 2. Hook the hammock rings on the upper hammock hooks to take up any slack. 2-17
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 64
    and numbers. Setting Paper Configurations When you use non-EPSON paper or other media, you may need to register test it on a small print job. If the ink smears or printing is blurred, you need to register a new paper stock, load it into the printer and follow these steps: 1. Press the SelecType
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 65
    the time in minutes, then press Enter. Start with one minute. If ink still smears, increase the drying time. This is how long the print head will pause between pages (or before cutting) to let the ink dry. 8. Press the Item button. SUCTION=NORM* appears on the display. If
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 66
    2-20 | Handling Paper and Other Media 2-20
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 67
    Chapter 3: Printing with EPSON Drivers for Macintosh Your EPSON Stylus Pro 10000 comes with drivers and utilities that let you print and or the driver itself. The driver CD-ROM also includes an electronic Reference Guide to your printer and EPSON printer software. You can read the guide using
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 68
    3-2 | Printing with EPSON Drivers for Macintosh Note Many application settings override the printer's page setup options. Always verify settings to get the results you expect. If you need more information about print options, click the ? on any dialog box. Creating a custom paper size lets you make
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 69
    setup options, you need to select printing options. The EPSON driver offers automatic settings that optimize print quality and speed when you're using EPSON media. You can also choose advanced settings for more control over your printer and color management options, as described on page 3-9. 3-3
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 70
    3-4 | Printing with EPSON Drivers for Macintosh Follow these steps to make basic settings for automatic printer adjustments: 1. Choose Print from the table on page 3-7 (Photographic Dye Ink model) or 3-8 (Archival Ink model). 4. Select Color or Black ink. 5. Make sure Photo Printing Accelerator is
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 71
    Printing with EPSON Drivers for Macintosh | 3-5 Note You can also create your own settings and add them to this list. See page 3-11 for more information. 6. Set the Mode option as follows: • Click Automatic to have the printer driver analyze the contents of your image or file and make the
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 72
    3-6 | Printing with EPSON Drivers for Macintosh 7. Choose from the following buttons to access additional features: • Click to access the printer monitoring and maintenance utilities preview your print. • Click to check your ink levels. 8. When you're finished choosing print options, click Print. 3-6
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 73
    The table below lists the settings designed to produce the best results on EPSON media when you print on an EPSON Stylus Pro 10000 Photographic Dye Ink model. If you are using paper or other media not listed in the table below, check the instructions included with the paper. If you are using non
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 74
    check the instructions included with the paper. If you're using a non-EPSON printing material, choose the closest setting. You may have to experiment to determine which setting is best for the media you're using. The table below lists the settings to use with the Stylus Pro 10000 Archival Ink model
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 75
    EPSON Drivers for Macintosh | 3-9 Media Type settings for the Stylus Pro 10000 Archival Ink model (cont.) Paper type Media Type setting Canvas Canvas Archival Matte Doubleweight Matte Paper Posterboard for Archival Ink through 4 on page 3-4. 2. Click Custom and then click Advanced. You see a
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 76
    3-10 | Printing with EPSON Drivers for Macintosh 4. Choose one of the following Print Quality settings: • Economy To save ink • Normal - 360dpi For faster printing and everyday needs • Fine transfer of data from your Macintosh to the printer. This setting takes advantage of special hardware in your
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 77
    profile, created specifically for the EPSON Stylus Pro 10000. (See page 3-12 for descriptions of the available settings.) You can also use this option to select custom ICC profiles that you have created. • No Color Adjustment Disables color management in the printer driver. Choose this mode if you
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 78
    the lighting conditions in which they will be displayed. The EPSON printer driver was designed to represent color accurately when prints are illuminated with 1.5 Gamma Produces the same contrast values as earlier EPSON ink jet printers. 1.8 Gamma Increases contrast. 2.2 Gamma Matches image
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 79
    Printing with EPSON Drivers for Macintosh | 3-13 ColorSync Rendering Intent settings Perceptual For photographic images. Maintains the relationship between colors as it scales them to fit within your printer's color gamut. Saturation For charts and business graphics. Maintains the relative
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 80
    with EPSON Drivers for Macintosh details. 5. Click OK to save your settings and return to the printer settings dialog box. 6. Click Print to print your document. If you on background printing to view the EPSON Monitor3 window. See page 3-13 for instructions. Using Monitor3 The Monitor3 utility
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 81
    with EPSON Drivers for to change the number of copies to be printed • Click to check your ink levels • Click to start the print head cleaning utility. See page 6-1 Print queue on hold in the EPSON Monitor3 dialog box, select Start print queue from the Printer menu to release the queue and resume
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 82
    3-16 | Printing with EPSON Drivers for Macintosh Click the print job whose priority you you need to cancel a print job, follow these steps: 1. Press the Power button to turn off the printer. 2. Do one of the following, depending on whether you're using background printing: • If background printing
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 83
    Printing with EPSON Drivers for Macintosh | 3-17 Checking Printer Status The Status Monitor utility lets you check the levels of ink in your printer and configure error messages and other features of printer operation. Follow these steps to check ink levels: 1. Click the utility button on the print
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 84
    3-18 | Printing with EPSON Drivers for Macintosh Selecting Configuration Options You can configure the way you want the printer to handle error and warning messages, ink level checks, and print file handling in the Configuration Settings dialog box. Follow these steps: 1. Click the utility button on
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 85
    EPSON Drivers for Macintosh | 3-19 • Data will be sent to the printer after being stored on your disk prevents print head pausing. Normally, graphics are sent in rectangular bands. When you select this option, your Macintosh stores the entire image on its hard drive and then sends it to the printer
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 86
    3-20 | Printing with EPSON Drivers for Macintosh 3-20
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 87
    4: Your EPSON Stylus Pro 10000 comes with drivers and utilities that let you Printing with EPSON Drivers print and manage print jobs without a RIP. ICC profiles are included, so you can use advanced color management features of your applications or the driver itself. for Windows The driver CD
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 88
    with EPSON Drivers for Ink model) or 4-5 (Archival Ink model). 4. Select Color or Black ink. 5. Set the Mode option as follows: • Click Automatic to have the printer driver • Click Custom, and then choose one of the print job types from the custom settings list, as described in the table below.
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 89
    Printing with EPSON Drivers for Windows | 4-3 Note You can also create your own settings and add them to this list. See page 4-9 for more information. Note Do not turn off Photo Printing Accelerator unless you see poor image quality and want to test whether this setting has an effect. Custom print
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 90
    The table below lists the settings designed to produce the best results on EPSON media when you print on an EPSON Stylus Pro 10000 Photographic Dye Ink model. If you are using paper or other media not listed in the table below, check the instructions included with the paper. If you are using non
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 91
    check the instructions included with the media. If you're using a non-EPSON printing material, choose the closest setting. You may have to experiment to determine which setting is best for the media you're using. The table below lists the settings to use with the Stylus Pro 10000 Archival Ink model
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 92
    4-6 | Printing with EPSON Drivers for Windows Media Type settings for the Stylus Pro 10000 Archival Ink model (cont.) Paper type Media Type setting Canvas Canvas Archival Matte Doubleweight Matte Paper Posterboard for Archival Ink* Doubleweight Matte Paper Scrim Vinyl* Adhesive Vinyl
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 93
    EPSON Drivers for Windows | 4-7 Note Creating a user-defined paper size generally lets you make the best use of your roll paper. Note Don't select Landscape unless you want to rotate your image 90°. 2. Select the type of paper you loaded in the printer 2. Click Custom and then click Advanced. 4-7
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 94
    4-8 | Printing with EPSON Drivers for Windows You see a dialog box like the following: When you choose PhotoEnhance4, you see a different set of options on the lower part of the screen. 3. If necessary, you can change your Media Type and Ink settings. 4. Choose one of the following Print Quality
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 95
    effect settings you choose. Also allows you to correct noise and other problems common to digital camera images. See page 4-10 for a description of the available settings. • No Color Adjustment Disables color management in the printer driver. Choose this mode if you want to use a standalone color
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 96
    the lighting conditions in which they will be displayed. The EPSON printer driver was designed to represent color accurately when prints are illuminated with 1.5 Gamma Produces the same contrast values as earlier EPSON ink jet printers. 1.8 Gamma Increases contrast. 2.2 Gamma Matches image
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 97
    EPSON Drivers for Windows | 4-11 Managing Print Jobs Your printer which also appears on the taskbar, also lets you check the printer's status and monitor print jobs. See page 4-12 for more pause, or restart your print job. You also see how much ink you have left and view printing tips. If you don't
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 98
    4-12 | Printing with EPSON Drivers for Windows Using the Spool Manager The Spool Manager (not available with Windows NT) displays the status of your print job files and lets you control them. To open the Spool Manager while you're printing, click the EPSON Stylus Pro 10000 or 10000CF icon that
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 99
    , such as low ink or jammed paper, Status Monitor 3 displays a How To button that you can click for instructions on solving the problem. 3. Click the EPSON Status Monitor 3 button. The following window appears. (It also opens automatically when an error occurs.) Printer status messages appear here
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 100
    Printing with EPSON Drivers for Windows Setting Monitoring Preferences You can choose when and how you want to be notified of problems, whether you want a Status Monitor 3 icon to appear on your Windows taskbar, and whether you want to allow monitoring by other users who share the printer. Follow
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 101
    Printing with EPSON Drivers for Windows | 4-15 4. Click the Monitoring Preferences button. You see the to display the Monitoring Preferences dialog box. 7. Select Allow monitoring of shared printers if your printer is shared and you want to let other users monitor it. 8. Click OK to save your settings
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 102
    for the fastest data transfer rate and speed up the way your printer driver processes multiple-copy print jobs. 1. Click Start, point to Settings, then click Printers. 2. Right-click the EPSON Stylus Pro 10000 or 10000CF printer icon and select Properties (Windows 95, 98, or Me), Document Defaults
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 103
    lets you know that you can speed up printing by enabling DMA transfers on your system. See your electronic Reference Guide for instructions on using DMA transfers, if your computer supports them. For more information, see your computer documentation or contact your computer manufacturer's technical
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 104
    4-18 | Printing with EPSON Drivers for Windows 4-18
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 105
    Chapter 5: Monitoring and Configuring the Printer Note You can also use your printer software utilities to monitor ink levels and alert you to problems. See Chapter 3 (Macintosh) or Chapter 4 (Windows) for more information. The EPSON Stylus Pro 10000 printer includes a number of monitoring
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 106
    the Pause button to continue. Pause light on or flashing Printer is warming up, performing maintenance, or charging ink. Pause light on Printer is paused. To resume printing, press the Pause button. Appears when the ink cartridge is being replaced. Operate light flashing Print head alignment
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 107
    of ink remaining in each cartridge, page count, and the status of various printer parts. To display this information on the control panel instead of printing it out, see page 5-4. Follow these steps to print the status check: 1. Load a sheet of paper in the printer, following the instructions on
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 108
    each of the 6 inks or service life remaining for a number of printer parts. The indicators read ink cartridges and paper cutter) need to be replaced by authorized EPSON service centers. INK LEFT-K (black) INK LEFT-C (cyan) INK LEFT-M (magenta) INK LEFT-LC (light cyan) INK LEFT-LM (light magenta) INK
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 109
    The waste ink system Call an authorized EPSON servicer to schedule is almost full. replacement of the waste ink system. NO INK CARTRIDGE Ink Out light(s) Ink cartridge(s) not on installed. Install ink cartridges as indicated by the lights. See page 6-7 for instructions. OPTION I/F - ERROR
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 110
    light on SERVICE REQ. All lights flashing Explanation Response Paper has jammed in the printer. Remove the jammed paper. See page 7-11 for more information. Roll paper was not cut completely. Cut the paper manually, then remove the cut paper from the printer
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 111
    ERROR You're using the wrong printer driver. Make sure you installed the Stylus Pro 10000 driver if your printer is the Photographic Dye Ink model, or the Stylus Pro 100000CF driver if your printer is the Archival Ink model. Damaged data was sent to the printer. To clear the data, press the
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 112
    page 2-9, page 2-13, page 5-8 Test Print Print a nozzle check or status check page 1-9, page 5-3 Printer Status Check ink levels and component life page 5-4 Paper Register paper thickness and drying time, page 2-18 Configuration and select registered configurations Cutter Replace the
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 113
    if you don't want to use these monitoring features. However, ink may be sprayed on the platen if you print an image that is too wide for the paper. Follow these steps to turn off paper monitoring: 1. Press the SelecType button. PRINTER SETTING MENU appears on the display. 2. Press the Item button
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 114
    5-10 | Monitoring and Configuring the Printer Note If you experience any problems using ECP mode, switch back to , you must connect a computer directly to the printer's parallel interface (without a RIP), and the computer must support ECP mode. See your computer's documentation for details
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 115
    + button. CODE PAGE=PC850 appears on the display. 4. Press the Enter button to save your setting. 5. Press the SelecType button to exit the Printer Setting menu. Restoring Default Settings You can erase all SelecType settings you have made and restore them to their default values. Follow these steps
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 116
    The maintenance mode also includes a MW7=A setting, for use by an authorized EPSON servicer only. Setting the Control Panel Language All control panel messages are displayed in English. However, you can use a special printer maintenance mode to change to any of the following languages: • French
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 117
    6: Maintaining and Transporting the Printer The EPSON Stylus Pro 10000 printer requires very little maintenance to keep working at its best. This chapter describes the following routine procedures: • Running a cleaning cycle • Aligning the print head • Replacing ink cartridges • Replacing the paper
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 118
    with Windows, click Start, point to Settings, and select Printers. Right-click your printer icon, and then select Properties (Windows 95, 98, or Check button and follow the instructions on the screen to print a nozzle check pattern. 5. When the pattern prints, check it for problems (see page 6-3 for
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 119
    button and follow the instructions on the screen to clean the print head. Cleaning takes about 60 seconds, during which the printer makes some noise and the following morning. If you still see no improvement, contact EPSON for assistance. Examining the Nozzle Check Pattern Examine the nozzle
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 120
    ink cartridge instead. See page 6-7 for instructions. 3. Press the Cleaning button and hold it for at least 3 seconds. The Pause light flashes as the printer head again the following morning. If you still see no improvement, contact EPSON for assistance. TIP It's a good idea always to run a nozzle
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 121
    and Transporting the Printer | 6-5 Aligning the Print Head from the Control Panel You can use EPSON roll paper to the control panel: 1. Load roll paper that is at least 24 inches wide in the printer. 2. Press the SelecType button until HEAD ALIGNMENT MENU is displayed. 3. Press the Item
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 122
    6-6 | Maintaining and Transporting the Printer Note Press Enter to cycle through the rows until you reach the one you want to repeat. 7. Look at the setting) shows the smallest gaps for both rows. Press the Pause button to exit head alignment mode and return to normal printer operation. 6-6
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 123
    printing. Use only the following EPSON ink cartridges: EPSON Stylus Pro 10000 Photographic Dye Ink • Black • Cyan • Magenta T499201 T502201 T501201 • Light cyan T504201 • Light magenta T503201 • Yellow T500201 EPSON Stylus Pro 10000 Archival Ink • Black • Cyan • Magenta T511201 T514201
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 124
    6-8 | Maintaining and Transporting the Printer 2. Push the indentation on the ink compartment cover to release the lock and open the cover. INK COMPART. OPEN appears on the display. 3. Locate the slot containing the empty ink cartridge (corresponding to the INK OUT light). Press down on the top of
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 125
    so may cause ink to leak. Be careful not to touch the green computer chip on the cartridge. This may affect normal operation and printing. 5. Make sure the replacement cartridge is the correct color, and remove it from its package. If you're using Archival ink, shake the cartridge gently before
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 126
    as described in step 6. 6. Hold the ink cartridge with the arrow mark on the left side and pointing to the rear of the printer. Then insert the ink cartridge into the slot. Don't force the cartridge. 7. Push the cartridge clamp back up. Make sure the corresponding Ink Out light goes off. Then close
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 127
    status check sheet or using the Printer Status menu on the control panel. See page 5-3 or 5-4 for instructions. You can obtain a new cutter blade (part number C815131) from EPSON at (800) 873-7766, or visit the EPSON Pro Graphics web site at http://prographics.epson.com. To replace the cutter blade
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 128
    6-12 | Maintaining and Transporting the Printer 4. When the holder stops moving and OPEN LOWER COVER appears on the display, open the lower cover. 5. When REPLACE CUTTER appears on the display, you
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 129
    | 6-13 7. Carefully remove the cutter blade from the printer. Installing the New Cutter Blade After you have removed the used cutter blade, you're ready to install the new one. Follow these steps: 1. Remove
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 130
    components. Don't use a hard or abrasive brush. Don't spray the inside of the printer with lubricants; unsuitable oils can damage the mechanism. Contact your dealer or a qualified servicer if your printer needs lubrication. 5. Close the lower cover. The cutter holder moves to the home (far
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 131
    or storing the printer: • Contact EPSON if you need to store your printer for an extended period (two years for the Photographic Dye Ink model, or six months for the Archival Ink model). See page 4 for contact information. A service technician must drain all ink from the printer before it is
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 132
    All paper or other media • Optional auto take-up reel (if installed) • Optional manual cutter (if installed) After you remove the ink cartridges, store them in separate, resealable plastic bags. 3. Make sure the ink cartridge clamps and cover are closed. 4. Make sure the casters on the leg assembly
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 133
    identical to setting it up for the first time. Whenever you set up the printer, see the Unpacking and Assembly Guide, and note the following points: • Don't forget to remove any protective material (such as tape from the ink cartridge clamps). • The first time you start printing after moving the
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 134
    6-18 | Maintaining and Transporting the Printer 2. Fully insert the upper and lower hammock guides, then roll up the paper hammock. 3. Release the front casters and retract the stabilizer knobs. 4. Carefully roll the printer to its new location. Relock the casters and extend the stabilizer knobs
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 135
    panel (see page 5-4) or through the Ink Pad number displayed on the nozzle check print (see page 5-3). The printer will display the following message on the control panel when the waste ink system is almost full: MAINTENANCE REQ. 0100 You should call to schedule service at this point. When the waste
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 136
    6-20 | Maintaining and Transporting the Printer 6-20
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 137
    Problems The EPSON Stylus Pro 10000 printer includes a number of ways to help you diagnose problems: • To identify the most common problems, check the messages and lights on the printer's control panel. See page 5-5 through 5-7 for more information. • If you're using the EPSON printer driver
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 138
    printer's hex dump mode to identify problems if you know how to interpret hex code, or you can fax the hex printout to a technical support representative. Make sure the printer cleaning cycle. See page 6-1 for instructions. • Align the print head. See page 6-4 for instructions. • When you send a
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 139
    setting in your printer software's Advanced dialog box. • Make sure the Media Type setting in the printer software is correct EPSON media). Use the control panel to select thinner paper. See page 2-18 for instructions. • Check the Ink Out lights to see if you are low on ink. Replace ink cartridges
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 140
    face up. • Ink has leaked into the paper path. Wipe the paper path area of the printer with a soft, clean cloth. See page 6-14 for cleaning instructions. • Deselect the High Speed setting in your printer software's Advanced dialog box. • The paper configuration setting for your non-EPSON media is
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 141
    not, turn off the power and unplug the power cord immediately. Contact EPSON for assistance. (See page 5 for details.) If none of these suggestions help, try the solutions below: Operational problems Problem The printer stops printing unexpectedly. Solution • If the Pause light is flashing, the
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 142
    7-6 | Resolving Problems Operational problems (continued) Problem Solution Nothing prints (cont.) • The printer port setting doesn't match the printer connection port (Windows). Windows Me, 98, or 95: Click Start, point to Settings and select Printers. Right-click the EPSON Stylus Pro 10000 or
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 143
    menus. See page 5-8 for more information. Your image is inverted. • Turn off the Flip Horizontal setting in your printer software. See page 3-10 (Macintosh) or 4-9 (Windows) in this manual for instructions. Blank paper is printed. • Make sure your software is installed correctly and the
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 144
    printing, select EPSON Monitor3 and increase its memory requirements. • If you're running Windows and your computer supports ECP or Enhanced let the printer automatically load your paper so that it feeds correctly. Follow the instructions on page 2-10. • For posterboard, follow the instructions on
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 145
    're not using EPSON media, make sure you register and select your paper's thickness. See page 2-18 for more information. Solving Roll Paper Feed Problems If your roll paper is curled too tightly and doesn't feed out of the printer, you can use the three paper guides. Extend the guides as shown below
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 146
    7-10 | Resolving Problems • If you have the paper hammock set up in front of the printer, extend the paper guides out so they rest on the front of the hammock. • If you have the paper hammock set up below the printer, extend the paper guides so that they rest on the back of the hammock. 7-10
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 147
    Caution Resolving Problems | 7-11 Clearing Paper Jams When paper gets jammed in the printer, printing stops and you see a PAPER JAM paper set lever out to release the jammed paper. To avoid damaging the printer, never move the paper set lever while the Operate or Pause light is flashing. 3. Open
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 148
    -ROM. Then double-click the CD-ROM icon to open it, if necessary. 2. Double-click one of the following icons: • Printer Driver Installer Photographic Dye, if your printer is the Photographic Dye Ink model. • Printer Driver Installer EPSON Archival Ink, if your printer is the Archival Ink model. 7-12
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 149
    icon. 3. Click the Add/Remove button (Change/Remove button in Windows 2000) and follow the on-screen instructions. 4. If you're using the USB port in Windows 98 or Me, click EPSON USB Printer Devices in the program list; then click the Add/Remove button. 5. Restart your computer. Then follow the
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 150
    7-14 | Resolving Problems 7-14
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 151
    Specifications Printing Printing method On-demand ink jet Nozzle configuration Black: 180 nozzles Waste ink system requires replacement approximately every 2 years based on 25% duty cycle Cutter blade life Approximately 2,000 B0+ sheets (EPSON media sheets with manual insertion 1
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 152
    RAM Character sets Character tables 1/6 inch or programmable in 1/720-inch increments 128MB (fixed) EPSON Courier 10 characters per inch PC 437 (US, Standard Europe) PC 850 (Multilingual) Environmental ) 291 lb (132 kg), with stand Friction Roll paper or cut sheets with manual insertion A-2
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 153
    Pause button on the control panel for 3 seconds or more: The print head is capped. Any paper in the printer is ejected. The input data buffer and print buffer are cleared. The printer returns to the last default settings. Safety Approvals Safety standards EMC UL 1950, CSA 22.2 No. 950 FCC part
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 154
    A-4 | Specifications Paper Cut sheet paper specifications Dimensions in Size inches (approximate) Super B0 44 × 62.2 B0 40.5 × 57.3 Super A0 36 × 50.9 A0 33 × 46 US E 34 × 44 B1 28.7 × 40.5 Super A1 24 × 36 US D 22 × 34 A1 23.4 × 33 B2 20.25 × 28.75 A2 16.5 × 23.4 Super
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 155
    print quality and cause paper jams or other problems. If you encounter problems, switch to a higher grade of paper. using the control panel. See page 5-8 for instructions. Ink Cartridges Print yield Photographic Dye Archival Cartridge life Photographic Dye Archival Approx. 28 pages/A0 (720 dpi, 40
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 156
    to 140 °F (-30 to 60 °C); 1 month at 104 °F, 120 hours at 140 °F Freezing 5 °F (-15 °C); ink thaws and is usable after at least 3 hours at 77 °F (25 °C) Dimensions Height 6.6 in. (168 mm) Depth 13 you use the printer. Yield of the initial cartridge set is reduced because of ink charging. A-6
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 157
    Specifications | A-7 Parallel Interface Forward Channel Data format Synchronization Handshake timing Signal level Connector 8-bit parallel, IEEE-1284 compatibility mode STROBE pulse BUSY and ACKNLG signals TTL compatible 57-30360 Amphenol connector or equivalent Reverse Channel Transmission
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 158
    A-8 | Specifications USB Interface Standard Bit rate Data encoding Connector Recommended cable length Based on Universal Serial Bus Specifications Revision 1.1, Universal Serial Bus Device Class Definition for Printing Devices Version 1.1 Approx. 12M bps (full speed device) NRZI USB Series B 6
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 159
    to 1-27 AppleTalk setting, 1-14 Archival Ink ink cartridges, 6-7 Media Type settings, 3-8 to problems, 7-5, 7-6 Canceling print jobs control panel, 5-2 Macintosh, 3-15, 3-16 Windows, 4-12 Canvas cutting, 2-9 ordering, 5, 2-4 Cartridges, see Ink cartridges Casters, 6-18 -1 Chooser, selecting printer
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 160
    paper manually, 2-9 replacing blade, 6-11 to 6-14 service life, A-1 D Data transfer, optimizing, 4-16 to 4-17 Default settings, restoring, 5-11 Deleting print jobs Macintosh, 3-15, 3-16 Windows, 4-12 Diagnosing problems, 7-1 to 7-2 Digital camera correction, 3-12, 4-10 Dimensions of printer, A-2 DMA
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 161
    settings Archival Ink, 3-8 to 3-9, 4-5 to 4-6 Photographic Dye Ink, 3-7, 4-4 Memory problems, 7-6 specifications, A-1 Menus, SelecType, see SelecType menus Messages error, 5-5 to 5-7 status, 5-2 Metamerism, 3-12, 4-10 MicroWeave setting, 3-10, 4-8 Monitor3, 3-14 to 3-16 Monitoring printer control
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 162
    5-4 Moving printer, 6-15 custom size, creating, 3-2, 4-7 cut sheet, 2-10 to 2-14 drying time setting, 2-18 to 2-19 EPSON to 6-14 service life, A-1 Paper feed speed, A-1 Paper guides, 7-9 to 16 to 4-17 problems, 7-5, 7-6 specifications 4-10 Photographic Dye Ink ink cartridges, 6-7 Media Type settings
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 163
    cleaning, 6-1 to 6-4 service life, A-1 Print jobs canceling, 3-15, 3-16, 4-12, 5-2 custom settings, 3-5, 4-3 managing, printer driver, 7-5 to 7-7 printing stops, 7-5 roll paper cannot be cut, 7-8 slow printing, 7-8 smeared prints, 7-7 Progress Meter, 4-11, 4-16 R RAM, see Memory Registering non-EPSON
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 164
    2-7 to 2-8 cannot be cut, 7-8 cutting manually, 2-9 feed problems, 7-9 to 7-10 loading, 1-4 to 1-9 ink cartridges, A-5 to A-6 mechanical, A-2 paper, A-4 parallel interface, A-7 printable area, A-5 printer printer, 6-15 to 6-17 Support, EPSON, 4 to 5 System requirements, 5 to 6 T Technical support,
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 165
    3-12, 4-10 W Waste ink system, 5-3 to 5-4, 6-19, A-1 Watercolor Paper-Radiant White, 2-5 Weight of printer, A-2 Width of printer, A-2 Windows advanced print options, 4-7 to 4-10 basic print options, 4-1 to 4-6 color management, 4-9 to 4-10 custom print job settings, 4-3 drivers, 4-1 to 4-10 layout
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 166
    FireWire interface connectors optional interface card slot connector for optional Automatic Take-Up Reel Photo Printing Accelerator slot parallel interface connector USB interface connector 9 AC inlet
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 167
    mounting brackets lower cover roll paper spindles roll paper cover paper set lever control panel ink cartridge compartment paper hammock 1
  • Epson Stylus Pro 10000 - Archival Ink | User Manual - Page 168
    EPSON Stylus® Pro 10000 Printed in USA CPD-12208
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
EPSON
Stylus
®
Pro 10000
Printer Guide