Epson Stylus Pro 4880 ColorBurst Edition Printer Guide

Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Manual

Get Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst PDF manuals and user guides View all Epson Stylus Pro 4880 ColorBurst Edition manuals
Add to My Manuals
Save this manual to your list of manuals

Epson Stylus Pro 4880 ColorBurst Edition manual content summary:

  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 1
    Epson Stylus® Pro 4880 PRINTER GUIDE
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 2
    to other printers. Trademarks Epson, Epson Stylus, and Micro Weave are registered trademarks and Epson Exceed Your Vision is a trademark of Seiko Epson Corporation. UltraSmooth is a registered trademark, PhotoEnhance and Epson UltraChrome K3 are trademarks, and Epson Preferred is a service mark of
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 3
    installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 4
    4
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 5
    2 Handling Paper and Other Media Selecting Media for Your Printer 29 Guidelines for Using Epson Media 30 Using Cut Sheet Paper 30 Cut Sheet Paper Paths 31 Loading Paper in the Paper Tray 33 Using the Front Manual Feed Slot 38 Using the Rear Manual Feed Slot 41 Using Roll Paper 42 Roll Paper
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 6
    Configurations 50 Selecting Custom Paper Configurations 52 3 Printing with Epson Drivers for Macintosh Choosing Page Setup Options 54 Choosing Photo Settings 86 Customizing the Printer Driver 88 Saving and Sharing Custom Settings 89 Saving and Sharing Custom Media Settings 90 Editing Printer
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 7
    Old Ink 110 Installing the New Black Ink Cartridge 111 Updating the Printer Driver Information 112 Performing Problems 134 Solving Miscellaneous Printing Problems 135 Solving Paper Problems 137 Clearing Roll Paper Jams 138 Clearing Paper Tray Jams 140 Clearing Paper Jams from the Manual
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 8
    Contents | 8 A Specifications Environmental 147 Electrical 147 Dimensions 147 Weight 148 Printer Interfaces 148 Safety Approvals 148 Media 148 Roll Paper 148 Cut Sheets 148 Printable Area 149 Ink Cartridges 149 Index 151 8
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 9
    working at its best, and provides troubleshooting tips in case you have a problem. For additional information, see the following: • The Start Here sheet explains how to set up your printer, install the software for a USB connection, and load paper. Be sure to follow these instructions to set up your
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 10
    are currently available. Options and Accessories Your Epson Stylus® Pro 4880 offers these optional upgrades and accessories: Optional equipment and software Option Epson Stylus Pro 4880 Printer Cabinet Stand Epson Stylus Pro 4880 TUMI Printer Cover Paper Roller Spindle (Normal Tension) - 2- or
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 11
    need your printer serial number. Epson also provides technical assistance 24 hours a day through the World Wide Web. You can reach Epson Support at epson.com/support. At this site, you can download drivers, firmware, and other files, look at product documentation, access troubleshooting information
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 12
    Windows XP Professional x64 Edition, Windows Vista®, or Windows Vista x64 • At least 1GB of RAM (2GB or more recommended) • At least 30GB of free hard disk space for software and processing files • Quad-speed (4×) or faster CD-ROM or DVD drive for installing the printer software • For USB connection
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 13
    13 Important Safety Instructions Before using your printer, read the following safety instructions to make sure you use the equipment safely and effectively. • The printer weighs about 88 lb (40 kg) (without ink or paper), and should be lifted by two people. • When setting up the printer, make sure
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 14
    inside this product or touch the ink cartridges during printing. • Do not move the print head by hand unless instructed to do so by an Epson service technician; otherwise you may damage the printer. • Do not insert objects through the slots. Take care not to spill liquid on this product. • Do not
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 15
    The lithium batteries in this product contain Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate. Ink Cartridge Safety Instructions • Keep ink cartridges out of the reach of children and do not drink the ink. • Store ink cartridges in a cool, dark place
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 16
    16 | Introduction Identifying Printer Parts Top cover Rear manual feed slot Roll paper cover Paper lever Control panel Roll paper support Ink lever Ink compartment Paper tray Maintenance tank Paper tray cover Front manual feed slot Ink cartridge slot 16
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 17
    Introduction | 17 Roll paper spindle Rear cover release knobs Spindle adapter AC inlet Rear cover Network interface USB interface 17
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 18
    18 | Introduction 18
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 19
    cable to the printer's Ethernet port. Then connect the other end to your network switch or hub or your computer's Ethernet port. 3. Turn on the printer. Once the printer is connected to your network, you need to configure it. See "Configuring the Network Interface" on page 20 for instructions. 19
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 20
    uses a DHCP server to configure your network devices' IP settings automatically. • PANEL: Select this setting if you would like to configure the printer's IP settings manually. 8. Press Menu . An asterisk appears next to the setting you selected. 9. Press to go back. Then do one of the following
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 21
    , or "Installing the Software for Windows" on page 24. Note: You can check for newer versions of your printer driver and utilities on the Epson support site at epson.com/support. Installing the Software for Macintosh Follow the steps below to install the software on a Macintosh. For Windows, see
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 22
    version before you can install the new one. To uninstall, drag the EpsonNet folder to the trash.Then reinstall your printer software. 5. Follow the on-screen instructions to install all the necessary software and manuals, and place a link to the Epson Professional Imaging Website on your desktop
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 23
    : Tip: If you want to rename the printer for easier identification, enter a new name for it in the Name field on this screen. If your Macintosh cannot find the printer, click More Printers and select a connection, such as EPSON TCP/IP. Select your printer, then wait while your Macintosh finds the
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 24
    Windows For Windows, you need to add the printer's network port, then install the software. For instructions on adding the network port, see the Network Guide on the printer CD or on your computer. 1. Turn on your computer and your printer. 2. Insert the printer software CD-ROM in your computer. The
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 25
    on the Epson support site and update your printer, if necessary. Downloading the Firmware 1. Navigate to epson.com/support in your browser. 2. Choose your printer. 3. Click Drivers & Downloads to find the newest firmware. 4. Choose the version for Macintosh or Windows and follow the instructions on
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 26
    the electronic guide. Note: If the Epson LFP Remote Panel does not launch when you click EPSON LFP Remote Panel in the printer utility window, OS X: Open EPSON Printer Utility2 in your Applications folder. Select SPro 4880, click OK, then click EPSON LFP Remote Panel in the printer utility window.
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 27
    is on, its LCD is set to READY, and it is connected to your computer, then choose Stylus Pro 4880 or EPSON Stylus Pro 4880 in the Printer list. 5. Click Browse and find the firmware that you just downloaded and extracted. Select the file and click Choose. 6. If the firmware version of the
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 28
    28 | Setting Up the Printer On a Network 28
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 29
    29 Chapter 2: Handling Paper and Other Media The Epson Stylus Pro 4880 prints on a variety of media, including roll paper and cut sheets up to 17 inches wide. You can also use heavy stock, such as posterboard
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 30
    printer driver software and on the printer's control panel. See page 55 (Mac OS X) or page 79 (Windows) for instructions on selecting the paper source in your printer cut sheet paper and other media. The Epson Stylus Pro 4880 accepts sheets ranging from 8 × 10 manually, as described on page 38. 30
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 31
    Semimatte • Non-Epson media with paper thicknesses from 0.08 to 0.79 mm Rear manual feed slot • Premium Photo Paper Glossy • Premium Glossy Photo Paper • Premium Photo Paper Semi-gloss • Premium Semigloss Photo Paper • Ultra Premium Photo Paper Luster • Premium Luster Photo Paper • Singleweight
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 32
    Matte Paper • Watercolor Paper - Radiant White • UltraSmooth Fine Art Paper • Velvet Fine Art Paper • Plain paper • Proofing Paper Commercial Semimatte • Non-Epson media with paper thicknesses from 0.08 to 0.79 mm Front manual feed slot • Non-Epson media with paper thicknesses from 0.8 to 1.5 mm 32
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 33
    for various types and sizes of Epson paper: Epson cut sheet paper capacity Paper type Premium Photo Paper Semi-gloss Premium Semigloss Photo Paper Ultra Premium Photo Paper Luster Premium Luster Photo Paper Singleweight Matte Paper Presentation Paper Matte Photo Quality Ink Jet Paper Proofing Paper
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 34
    34 | Handling Paper and Other Media Follow these steps to load cut sheets in the paper tray: 1. Make sure the printer is turned on, then press the Paper Source button until the sheet icon appears on the LCD display. 2. Extend the paper tray and paper tray cover. 3. Lift up the paper tray cover. 34
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 35
    Handling Paper and Other Media | 35 4. Flip up the paper guide roller and slide the edge guide all the way to the left. 5. Clean the inside of the paper tray to remove any dust. Dust may affect printout quality. 6. Thumb through a stack
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 36
    36 | Handling Paper and Other Media Make sure the stack of paper fits under the arrow on the left edge guide. 8. Adjust the edge guide and length of the paper tray. If you're printing on letter-size paper, raise the paper guide and push it against the end of the paper stack. 36
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 37
    and Other Media | 37 9. Flip the paper guide roller down onto the stack of paper. Note: Make sure the roll paper support on the paper tray cover is not raised. 10. Replace the paper tray cover and adjust its length. 11. Extend the paper tray cover if necessary to support your printouts. 37
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 38
    print on posterboard or other media 31 to 59 mil (0.8 to 1.5 mm) thick, you need to use the manual feed slot. This provides a straight-through paper path. Be sure to allow enough room behind the printer so the paper is not bent when it feeds into the printing position. 1. Make sure the
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 39
    Handling Paper and Other Media | 39 4. Insert the sheet face-up, above the black rollers. 5. Push the sheet under the gray feed rollers. Gray feed rollers 6. Align the edge of the paper with the mark on the paper tray cover, as shown below. For longer sheets, make sure you align the right edge of
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 40
    Handling Paper and Other Media 7. Return the paper lever to the secured position. The printer automatically feeds the paper into printing position. 8. Extend the paper tray and cover if necessary to support the sheet as it comes out of the printer. Make sure the roll paper support is not raised. 40
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 41
    display. 2. Align the sheet with the right edge of the slot and insert it until it meets resistance. Make sure the sheet is straight. The printer automatically feeds the sheet into printing position. 3. Extend the paper tray and cover if necessary to support the sheet as it comes out of the
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 42
    roll paper with a 2- or 3-inch core, up to 17 inches wide. Manually switching from one paper roll to another is a simple process. Check the Epson Pro Imaging website (www.proimaging.epson.com) or your Epson Professional Imaging authorized reseller for available media. Caution: Some 2-inch core roll
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 43
    into the end of the roll. Make sure it is firmly fixed into the left end of the paper roll. Placing the Paper in the Printer Follow these steps to place the paper in the
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 44
    spindle goes on the left.) Note: To avoid feeding excess paper, make sure you don't select when you're using roll paper. 3. Make sure the printer is turned on, then press the Paper Source button until the or icon appears on the LCD display. 4. Raise the roll paper
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 45
    Handling Paper and Other Media | 45 5. Release the paper lever. 6. Hold both sides of the paper and feed it into the slot. 45
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 46
    automatically positions the paper for printing. Note: The maximum page length you can print on is limited by the printer driver, and may also be limited by your application software and/or operating system. 9. Close the roll paper cover. To avoid indenting or creasing the
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 47
    off the top of the spindle. 6. Remove the roll paper from the spindle. Note: Roll paper with a 2-inch core may cause paper jams on this printer due to severe paper curl. If you notice frequent paper jams when using 2-inch core media, switch to media with a 3-inch core. Switching Between 2-Inch
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 48
    using the auto cut setting, you need to cut the paper manually by pressing the button after your print job is finished. You of media that cannot be used with the built-in cutter. Follow these steps to cut manually with the built-in cutter: 1. Before you print, press the Paper Source button until you
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 49
    the setting. An asterisk appears next to ON. 7. Press the pause button to exit the menu. You can also specify trim lines from your printer driver software. For instructions, see page 64 (Mac OS X) or page 82 (Windows). Adjusting the Platen Gap for Thick or Thin Paper When you print on unusually
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 50
    automatically determines the best settings for your paper. However, you may want to fine-tune how the printer handles various media-especially if you use non-Epson paper or a paper not supported by the driver. Use the paper configuration settings described below. If you're printing on unusually
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 51
    Menu button to save each setting. You can also make similar settings using the printer driver software. For instructions, see page 60 (Mac OS X) or page 86 (Windows). • CUT eject roller for printing with non-Epson media. You may need to experiment to determine the best setting for your paper. 51
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 52
    Other Media • DRYING TIME lets you print with non-Epson media and avoid smearing the ink. You can make the the button to select the configuration number that you want to use. If you select STANDARD, the printer uses the driver settings. If you select a number from 1 to 10, the control panel settings
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 53
    from your Epson Stylus Pro 4880 for color photos. For the best black and white photography output, the Stylus Pro 4880 driver offers Advanced Epson printer driver, the ready-made profiles are automatically copied to the right folder. Tip: Check the Epson Pro Imaging website at www.proimaging.epson
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 54
    Epson printer driver and utilities from the CD-ROM. You also need to configure your connection and set up the printer in the Printer Setup Utility. For instructions on installing and configuring the printer . You see this screen: Select Stylus Pro 4880 Note: If your application has margin
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 55
    , select the size of the paper loaded in the printer. Then continue with step 7. • If you're using roll paper, Epson recommends that you create a custom paper size to make the best use of your paper. Continue with step 4 for instructions. The following settings are available, depending on the size
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 56
    56 | Printing with Epson Drivers for Macintosh • Roll Paper - Borderless (Retain Size) click OK. 6. Make sure your new custom page size is showing. 7. Choose the appropriate Orientation and Scale for printing. 8. Click OK. Then continue with the instructions in the next section to select additional
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 57
    're using Epson media. You can also choose advanced settings for more control over your printer and color management options, as described on page 60. 1. Select Print in your application. You see the screen shown below: Select Stylus Pro 4880 2. Choose Stylus Pro 4880 from the Printer menu. 3. Click
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 58
    the Watercolor Paper - Radiant White setting. If your paper is not listed, check the instructions included with the paper, or look on the Epson website (www.proimaging.epson.com). If you are using non-Epson paper, choose the closest setting. You may have to experiment with different settings to
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 59
    Photo if you are printing black and white photos using this unique printer technology on select paper types. (For paper types that don't support this option, print black and white photos graphics, such as charts and graphs. The EPSON Standard (sRGB) setting increases the contrast in images
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 60
    60 | Printing with Epson Drivers for Macintosh 8. Choose any of the following: • High Speed color management in the printer driver, as described on page 61. Choosing Color Management and Paper Configuration Options Follow these instructions to use color management in the printer driver. If necessary
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 61
    Printing with Epson Drivers for Macintosh | 61 Note: You may need to change the and choose filters or other settings. • (Off) No Color Adjustment to disable color management in the printer driver. Choose this mode when you use a color-managed workflow in Photoshop or other software applications. 3.
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 62
    . • Color Density lets you control the ink saturation level (for example, when you turn off color management in your printer software). • Drying Time per Print Head Pass lets you print with non-Epson media and avoid smearing the ink. You can make the print head wait up to 5 seconds after each pass
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 63
    Printing with Epson Drivers for Macintosh | 63 Choosing Roll Paper Options If you are if you want to operate the cutter manually, print multiple print jobs without cutting, or if you are printing on heavy media that must be cut by hand. See page 48 for instructions on using the button to operate the
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 64
    64 | Printing with Epson Drivers for Macintosh Note: These settings override settings made through the control panel. 3. Select either of the following options: • Print Page Line 12.34 12.23 14* 13.8 14.34 14.23 16 15.8 16.34 16.23 17 16.8 17.34 17.23 * Non-Epson roll media widths 64
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 65
    Printing with Epson Drivers for Macintosh | 65 create a custom preset. This will save you time when you use the same profile/printer/ink/media combination for future print jobs. 1. Select Summary from the drop-down menu. the Print button. See page 68 for instructions on monitoring your print job. 65
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 66
    White Photo Settings The Advanced Black and White Photo mode allows you to easily produce neutral and toned black-and-white prints using your Epson driver for the paper you have loaded in the printer. 3. Choose Advanced B&W Photo for the Color setting. Uncheck High Speed for the best quality. 66
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 67
    Printing with Epson Drivers for Macintosh | 67 4. Select Printer Color Management from the drop-down menu. You see this screen: 5. Choose the settings that are best for your photo. You can use the photo on the screen as a guide. • Color Toning: Allows you to add tone (hue) to your black and white
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 68
    68 | Printing with Epson Drivers for Macintosh • Max Optical Density: Adjusts the overall your print job using the Printer Setup Utility. Follow these steps: 1. Click the icon for your printer or Printer Setup Utility icon on the Dock. If necessary, double-click your printer (and print queue) name.
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 69
    . Checking Ink Levels and Maintenance Tank The Epson Printer Utility lets you check the levels of ink in the printer and the level of the maintenance tank. You can also run maintenance utilities from this screen. See pages 100 to 101 for instructions. 1. Double-click the Applications folder on your
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 70
    70 | Printing with Epson Drivers for Macintosh 3. Select SPro 4880 and click OK. You see the printer utility screen: 4. Click the EPSON StatusMonitor icon. 70
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 71
    Printing with Epson Drivers for Macintosh | 71 The software checks the amount of ink in the printer and maintenance tank and displays the StatusMonitor window: 5. To recheck the ink levels, click the Update button. To close the Status Monitor, click OK. 71
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 72
    72 | Printing with Epson Drivers for Macintosh 72
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 73
    photographic output from your Epson Stylus Pro 4880. For the best black and white photography output, the Stylus Pro 4880 driver offers Advanced Black and standard folder for your operating system. When you install the Epson printer driver, the ready-made profiles are automatically copied to the
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 74
    CD-ROM. The driver offers automatic settings that optimize print quality and speed when you're using Epson media. You can also choose advanced settings for more control over your printer and color management options. Follow these steps to make basic settings: 1. Start an application, open the file
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 75
    , check the instructions included with the paper, or check the Epson website (www.proimaging.epson.com). If you are using non-Epson media, choose the Photo if you are printing black and white photos on select paper types. (For paper types that don't support this option, print black and white photos
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 76
    | Printing with Epson Drivers for Windows 6. Set the Mode option as follows: • Click Automatic to have the printer driver analyze the detailed settings for advanced black and white photo printing, see page 86. • Click Custom, then follow the instructions in the next section to set color management
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 77
    Printing with Epson Drivers for Windows | 77 4. Choose one of the following and click the Advanced button: • Color Controls lets you specify individual values for adjusting brightness, contrast, saturation, and CMY inks, or choose from the three Printer Color Adjustment modes. You can also choose
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 78
    settings override settings in the printer driver. Always verify settings to get the results you expect. Choosing Paper and Layout Options You can select a variety of settings for margins, orientation, paper saving, sizing your image, and double-sided printing. Follow the instructions on page 79 to
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 79
    Printing with Epson Drivers for Windows | 79 Choosing Cut Sheet Paper Options 1. On the properties window, click the Main tab. You see this window: 2. Select the paper source you're using (Paper Tray or Manual Feed) from the Source list. 3. Click Printable Area and select the setting you'd like,
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 80
    Printing with Epson Drivers for click the Page Layout tab. See your on-screen User's Guide for more information about double-sided printing. 7. After making your settings OK. Note: Many application settings override settings in the printer driver. Always verify settings to get the results you expect
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 81
    Printing with Epson Drivers for Windows | 81 2. Select Roll Paper or Roll Paper (Banner) from if you are printing on heavy media that must be cut by hand. See page 48 for instructions on operating the cutter manually. • Single Cut causes the images to be printed end-to-end and saves paper. With
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 82
    82 | Printing with Epson Drivers for Windows Tip: Creating a user-defined paper size generally lets you make the best use of your roll paper. If you are printing with
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 83
    Printing with Epson Drivers for Windows | 83 The Auto Expand setting provides the best solution for borderless printing with minimal image clipping. Using this setting or .25 10 12* 11.8 12.25 12 14* 13.8 14.25 14 16 15.8 16.25 16 17 16.8 17.25 17 * Non-Epson roll media widths 83
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 84
    , change the print orientation, reduce or enlarge your image, or print on both sides of the paper. For instructions on multi-page or double-sided printing, see your on-screen User's Guide. 1. On the properties window, click the Page Layout tab. You see this window: 2. Make the settings you want
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 85
    Printing with Epson Drivers for Windows | 85 Depending on the resolution of the original was created to optimize D-max and color gamut. Choosing Paper Configuration Options 1. If you are using non-Epson media and you need to fine-tune its performance, click the Main tab and then the Paper Config
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 86
    you turn off color management in your printer software). • Drying Time per Print Head Pass lets you print with non-Epson media and avoid smearing the ink. You Photo Settings The Advanced Black and White Photo mode allows you to easily produce neutral and toned black-and-white prints using your Epson
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 87
    Printing with Epson Drivers for Windows | 87 1. On the Main tab, Choose the Media Type setting for the paper you have loaded in the printer. 2. Choose Advanced B&W Photo for the Color setting. 3. Click Custom, then click Advanced. You see this screen: 87
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 88
    88 | Printing with Epson Drivers for Windows 4. You can adjust the following settings: • Color Toning is just to be used to give you a level of feedback as you make changes. Customizing the Printer Driver You can save groups of settings or media settings, then select them for future print jobs. You
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 89
    Printing with Epson Drivers for Windows | 89 Saving and Sharing Custom Settings Once you've made the correct settings for your print job, you can save them as a custom setting. This will save you time when you use the same profile/printer/ink/media combination for future print jobs. 1. Click Save/
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 90
    90 | Printing with Epson Drivers for Windows Saving and Sharing Custom Media Settings You can also save and share custom media settings. 1. Adjust the Media Settings on the Main
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 91
    Printing with Epson Drivers for Windows | 91 Editing Printer Driver Settings 1. On the properties window, click the Utility tab, then select Menu Arrangement. 2. Select the item you want to edit. You can do the following. • Drag and drop the items to rearrange them • Add or delete groups • Move
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 92
    Epson page 93 for instructions. Optimizing Print Speed You can choose when and how you want to be notified of problems, whether you want a Status Monitor 3 icon to appear on your Windows taskbar, and whether you want to allow monitoring by other users who share the printer
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 93
    Meter lets you control whether or not the Progress Meter is displayed when you send a print job. • Disable EPSON Status Monitor 3 lets you control whether or not printer status is monitored (disabling is not recommended). • Always spool RAW datatype lets you spool documents using the RAW format
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 94
    with Epson Drivers for Windows 4. Click OK to close the Speed and Progress window and return to the Utility menu. Then click OK again to exit the utility. Setting Monitoring Preferences 1. Do one of the following: • Windows Vista: Click , click Control Panel, and click Printer under Hardware
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 95
    Printing with Epson Drivers for Windows | 95 5. Select Allow monitoring of shared printers if your printer is shared and you want to let other users monitor it. 6. Click OK to close the Monitoring Preferences window and return to the Utility menu. Then click OK again to exit the utility. 95
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 96
    96 | Printing with Epson Drivers for Windows 96
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 97
    To test the print quality, see page 100 for instructions on printing a nozzle check. The Epson Stylus Pro 4880 requires little maintenance to keep working at its best. This chapter describes the following routine procedures: • Checking printer status and part life • Checking and cleaning the print
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 98
    ink cartridges, cutter blade, and maintenance tank yourself. Other printer parts need to be replaced by an authorized Epson service technician. Note: Some status information is a projection based enabled by using the maintenance mode on the printer's control panel. See page 113 for instructions. 98
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 99
    Printer | 99 • To check the amount of ink left, press until you see INK LEFT, then press Menu . The status of the first cartridge (PK, or photo mode on the printer's control panel. See page 113 for instructions. • To the status of other printer parts, press until you see SERVICE LIFE, then press
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 100
    the menu. For more information about the Printer Status menu, see your on-screen User's Guide. Checking and Cleaning the Print Head If your of the following to access the printer utilities: • Mac OS X: Open EPSON Printer Utility2 in your Applications folder. Select SPro 4880, and click OK. • Windows
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 101
    Maintaining and Transporting the Printer | 101 You see a screen like the following: 3. Click the Nozzle Check gaps as shown below, click Clean to clean the print head and follow the on-screen instructions. 6. If the nozzles do not clear after a few cleaning cycles, run a Power Cleaning Cycle, as described
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 102
    printer's LCD panel is not on or flashing. 3. Press the Menu button. 4. Press the button until you see MAINTENANCE, then press Menu . 5. Press the button until you see PWR CLEANING, then press Menu . Press Menu again to start the power cleaning. 6. Follow the instructions contact Epson for
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 103
    these steps to align the print head using the control panel: 1. Make sure the printer is turned on. Then load letter-size Epson Ultra Premium Photo Paper Luster or Epson Premium Luster Photo Paper if you are printing with Photo Black ink. If you are printing with Matte Black ink, load letter-size
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 104
    104 | Maintaining and Transporting the Printer 9. When the uni-directional alignment is finished, press the button until you see BI-D 2- If you want to verify or fine-tune the automatic alignment process, you can perform a manual head alignment. See your on-screen User's Guide for instructions. 104
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 105
    cartridges for up to 6 months. Maintaining and Transporting the Printer | 105 Replacing Ink Cartridges Before you begin a large from the control panel: 1 2 3 4 5 6 7 8 Menu 3sec. 1 Matte Black/Photo Black Full Expended 8 Light Light Black 2 Cyan 4 Yellow 6 Light Cyan 3 Vivid Magenta 5
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 106
    are ready to replace it. To prevent ink reporting errors, never replace the ink cartridges with the printer turned off. Use the following Epson UltraChrome K3™ ink cartridges: Cartridge Photo Black Cyan Vivid Magenta Yellow Light Cyan Vivid Light Magenta Light Black Light Light Black Matte Black
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 107
    Maintaining and Transporting the Printer | 107 3. Raise the ink levers to the unlocked position. WARNING: Do , flush them immediately with water. 4. Remove the expended ink cartridge from the printer. Make sure you save your first set of expended 110 ml cartridges, so you can use them for
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 108
    108 | Maintaining and Transporting the Printer 6. Gently shake the cartridge before installing it. Note: If may not be inserted fully. 7. Hold the cartridge with the arrow pointing toward the printer. Then insert the cartridge into the slot. Don't force it in. 8. Lower the ink lever to
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 109
    Kit (included with your printer) and a new black ink cartridge (either Matte or Photo that you want to convert to). The printer includes a Photo Black cartridge. If papers, such as Epson Premium Luster Photo Paper (260), Premium Semi-gloss Photo Paper (250), Premium Semimatte Photo Paper (260), etc
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 110
    110 | Maintaining and Transporting the Printer Note: If REPLACE CNVRSION CRTG appears, press the pause button. Remove the old conversion cartridge(s) from the left ink compartment, and then insert the new conversion cartridge(s). Go to step 4 to start again. Changing the black ink cartridge also
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 111
    Maintaining and Transporting the Printer | 111 Note: Because ink charging after black ink conversion consumes a large quantity of ink, you may need to replace the ink cartridges and maintenance tank soon. Installing the New Black Ink Cartridge 1. When draining is complete, RAISE THE LEFT INK LEVER
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 112
    Mac OS X: Open EPSON Printer Utility2 in your Applications folder. Select SPro 4880, and click OK. Click the EPSON StatusMonitor button and make displayed. If not, set the information manually by clicking the Utility tab and then the Printer and Option Information button. Performing Additional
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 113
    occasionally. You can use the maintenance mode to do the following: • Print a hex dump for diagnosing problems • Change the language or units of measurements used on the printer's control panel menus • Enable the printable pages counter • Change the default pressure setting for the automatic cutter
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 114
    114 | Maintaining and Transporting the Printer • To enable printable pages, press the button until you see PAPER COUNTER, then then press Menu to view the information. 3. To exit the maintenance mode, turn off the printer by pressing the P power button. Press the P power button again to turn on the
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 115
    by printing the status check sheet or viewing its status on the control panel. See page 98 for instructions. You can obtain a new cutter blade from Epson (part number C12C815291). Make sure the printer is on, then follow these steps to replace the blade: 1. Press the Menu button. 2. Press the button
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 116
    and Transporting the Printer 6. When REPLACE CUTTER is displayed on the LCD, hold down the side pin as shown and turn the latch to the right. WARNING: The blade is sharp. Be careful when removing it. 7. Release the side pin and carefully remove the cutter blade. 8. Insert the new cutter as shown
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 117
    position. Note: You can purchase replacement items for your printer from an Epson Professional Imaging authorized reseller. To find the nearest reseller, visit www.proimaging.epson. com (U.S. sales), www.epson.ca (Canadian sales), or call 800-GO-EPSON (800-463-7766). Or you can purchase online at
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 118
    these steps to replace the tank: 1. Make sure the printer is not printing or performing any other operations (READY or PAPER OUT . 4. Place the used tank in the plastic bag included with the new tank. 5. Insert the new tank. 6. If you removed any ink cartridges, replace them after inserting the
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 119
    use a hard or abrasive brush. Don't spray the inside of the printer with lubricants; unsuitable oils can damage the mechanism. Contact Epson if you think the printer needs lubrication. Cleaning the Printer To keep your printer working at its best, you should clean it several times a year. 1. Make
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 120
    the needle valve hole and place each cartridge in a separate, resealable plastic bag. Be sure to remove the tape before reinstalling the cartridges. The printer must be powered on when removing or installing ink cartridges. 5. Make sure the print head is in the home (far right) position. Then lock
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 121
    need to uninstall and then reinstall the printer driver software for any reason, follow the instructions in the appropriate section below. Macintosh 1. Quit all running applications. 2. Insert the Epson printer software CD-ROM into your Macintosh. 3. Open the Epson CD-ROM desktop icon, if necessary
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 122
    Uninstall a Program under Programs. 3. Select EPSON Printer Software. 4. Click the Uninstall/Change button, then click Continue in the User Account Control window. 5. Select the EPSON Stylus Pro 4880 and click OK. 6. Follow the on-screen instructions to complete uninstallation. 7. When you return
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 123
    Start and Control Panel. 3. Double-click Add or Remove Programs. 4. Select EPSON Printer Software. 5. Click the Change/Remove button. 6. Select the EPSON Stylus Pro 4880 and click OK. 7. Follow the on-screen instructions to complete uninstallation. 8. When you return to the Add or Remove Programs
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 124
    124 | Maintaining and Transporting the Printer 124
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 125
    provides instructions for the following: • Diagnosing problems • Checking error messages and lights • Improving print quality • Solving operational problems • Solving miscellaneous printing problems • Solving paper problems, including clearing paper jams Diagnosing Problems The Epson Stylus Pro 4880
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 126
    126 | Solving Problems Checking Error Messages and Lights The control panel includes various lights and an LCD display to indicate the status of the printer: Paper light LCD display Power Ink button light Pause button and light Menu button Left arrow or paper source button 126
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 127
    button. Non-Epson genuine ink Press the pause button for 3 seconds to cartridge is installed. cancel printing. If you want to continue printing, press the pause button. - Cut sheet needs to be Load the sheet in the manual feed slot. See loaded manually. page 38 for instructions. - Cut sheet
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 128
    check the package and product code. Replace the ink cartridges with genuine Epson ink cartridges. Paper lever is in the After you finish loading 117 is full. for instructions. Borderless setting selected for A2-size sheets (11.7 × 16.5). Change the setting in the printer driver, or load
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 129
    REPLACE - CNVRSION CRTG Manually loaded sheet is not inserted far enough. Paper is too thick for head cleaning. Printer could not feed the printed page. The conversion cartridge needs to be replaced. Insert the sheet further into the printer. See page 38 for instructions. Pull the paper lever
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 130
    130 | Solving Problems Message SERVICE REQ. SET INK CRTG SET PAPER LEVER TOP COVER OPEN sheet. An error has occurred. Note the error number, then turn the printer off and back on. If the message remains, contact Epson as described on page 10. Ink cartridge chip error. Remove and reinstall the
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 131
    a nozzle check and cleaning cycle. See page 100 for instructions. ◗ Align the print head from the printer's control panel, as described on page 102. ◗ Turn page 75). ◗ If you're using a third-party RIP and non-Epson media, see if the RIP provides a method for adjusting the paper feed. Try adjusting
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 132
    page 100 for instructions. ◗ Align the print head, as described on page 102. ◗ Make sure the Media Type setting in the printer software is correct Paper Configuration utility. ◗ If you're using a third-party RIP or non-Epson media, custom color profiles will give you the best color reproduction.
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 133
    , or to NARROW if printing on very thin paper. See page 49 for instructions. ◗ Make sure the Media Type setting in the printer software is correct for the media you're printing on. ◗ If you're printing on non-Epson media, you may need to adjust the paper thickness setting, drying time, or
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 134
    to WIDE or WIDER. See page 49 for instructions. Solving Operational Problems If you can't turn the printer on, if it stops printing unexpectedly, or if the voltage on the printer's rating label. If not, turn off the power and unplug the power cord immediately. Contact Epson for assistance. (See
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 135
    . ◗ Follow the instructions beginning on page 121 to uninstall your printer software. Then locate your printer software CD-ROM and reinstall the software. You can also download and install the latest driver for Macintosh or Windows from the Epson website at www.proimaging.epson.com. Solving
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 136
    setting for PAPER MARGIN. See the on-screen User's Guide for more information. Your image is inverted. ◗ Turn off the Flip Horizontal or Mirror Image setting in your printer software. See page 60 (Mac OS X) or page 84 (Windows) for instructions. Blank paper is printed. ◗ Make sure your software
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 137
    problems occur frequently, try one or more of the following solutions: • For roll paper, try adjusting the paper suction setting. See page 50 for more information. You can also adjust this setting through your printer driver. • For heavy or thick media, follow the instructions not using Epson media,
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 138
    138 | Solving Problems Caution: To avoid damaging the printer, never move the paper lever while the pause light is flashing. Clearing Roll Paper Jams When roll paper gets jammed in the printer, printing stops and you see a PAPER JAM message on the LCD display. Follow these steps to clear a paper
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 139
    Solving Problems | 139 3. Remove the jammed paper from the front or back of the printer. Caution: Be careful not to damage the print head when you pull out the paper. 4. If necessary, open the top cover and remove the jammed paper. 5. Turn on the printer and make sure the paper light is on and
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 140
    140 | Solving Problems Clearing Paper Tray Jams If paper gets jammed while feeding from the tray, follow these steps to clear it: 1. Turn off the printer and release the paper lever. 2. Remove the paper tray. 140
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 141
    Solving Problems | 141 3. Carefully pull out the jammed paper. 4. If paper is still jammed in the printer, open the top cover and remove it. 5. If paper is jammed around the rear cover, remove the cover by pushing the square knobs inward and pulling the rear cover off the printer. 141
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 142
    142 | Solving Problems 6. Then remove the paper. Caution: Be careful not to touch the parts highlighted to the right; otherwise, you may damage the printer. 7. Reinstall the rear cover. 8. Turn on the printer and make sure the paper light is on and LOAD PAPER is displayed on the LCD panel. Then
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 143
    Solving Problems | 143 Clearing Paper Jams from the Manual Feed Slots If paper is jammed in the front or rear manual feed slots, follow these steps to clear it: 1. Turn off the printer and release the paper lever. 2. Remove the paper tray. 143
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 144
    144 | Solving Problems 3. Carefully pull out the jammed paper. 4. If you can't reach the paper from the front, remove it from the back of the printer. Caution: Be careful not to touch the parts highlighted to the right; otherwise, you may damage the printer. 144
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 145
    Solving Problems | 145 5. Turn on the printer and make sure the paper light is on and LOAD PAPER is displayed on the LCD panel. Then reload your paper. 145
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 146
    146 | Solving Problems 146
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 147
    W or less (ISO 10561 letter pattern) 5 W or less in standby mode 1 W or less in power off mode Check the label on the back of your printer for voltage information. Dimensions Height Width Depth 13.9 inches (354 mm) 33.4 inches (848 mm) 30.1 inches (765 mm) 147
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 148
    with tray and roll holder 88.6 lb (40.2 kg) Printer Interfaces • USB (1.1 and 2.0 compatible) • Ethernet Safety Approvals Safety standards EMC UL 60950, CSA 22.2 No. 60950 FCC part 15 subpart B, class B, CSA C108.8 class B Media
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 149
    to the quality of any non-Epson brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs. Poor quality paper may reduce print quality and cause paper jams or other problems. If you encounter problems, switch to a higher grade of paper
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 150
    150 | Specifications Weight 110 ml 220 ml Approximately 0.44 lb (200 g) Approximately 0.85 lb (385 g) 150
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 151
    112 Cleaner (cleaning unit), checking status, 97 to 100 Cleaning print head, 100 to 102, 113 printer, 119 Coarse Rendering setting, 93 Color management Mac OS X, 60 to 61 Windows, 76 Color problems, 136 ColorSync settings, 61 151 151 Component life, checking, 97 to 100 Configuration options Windows
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 152
    problems, 136 Windows, 84 152 H Head Alignment menu, 103 Head unit (print head), checking status, 97 to 100 Heavy media, cutting, 48 Height of printer, 147 Help, Epson 97 to 100, 105 ordering, 106 replacing, 105 to 109 safety instructions, 15 specifications, 149 Ink light, 126 to 130 J Jams, paper,
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 153
    69 page setup options, 54 to 56 paper configuration settings, 61 to 62 Printer Utility, 70 roll paper options, 63 to 64 software, uninstalling, 121 , 30 to 37 loading manually, 38 to 41 Mac OS X options, 54 to 56 non-Epson, 50 to 52 ordering, 42 printable area, 149 problems, 137 to 145 removing from
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 154
    Print jobs canceling, 69, 92 managing, 91 to 95 pausing, 69, 92 Print quality Mac OS X, 59 problems, 131 to 134 Windows, 75 Print speed, improving in Windows, 93 Printable area, 149 Printer checking status, 69 to 71, 97 to 100 cleaning, 119 cover, optional, 10 dimensions, 147 firmware update, 25
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 155
    Problems , 133 Progress Meter, 92, 93 R Registering non-Epson media, 50 to 52 Requirements, system, 11 to to spindle, 43 cannot be cut, 136 cutting manually, 48 loading, 42 to 46 Mac OS X settings approvals, 148 instructions, 13 to 15 Save Roll Paper setting, 64, 81 Setting up printer on network, 19
  • Epson Stylus Pro 4880 ColorBurst Edition | Printer Guide - Page 156
    , Epson, 10 to 11 System requirements, 11 to 12 T Technical support, 10 to 11 Temperature requirements, 147 Test Print menu, 98 Time and date setting, 112 Total prints, checking, 99 Transporting printer, 119 to 121 Trim lines, printing control panel, 49 Mac OS X, 64 Windows, 82 Troubleshooting
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
Epson Stylus
®
Pro 4880
PRINTER GUIDE