Epson V11H259220 User's Guide - Page 54

You can't change the language on a DVD. The DVD might not include multiple languages. Problems with External Video Equipment No picture appears on the screen. ■ Make sure the equipment is turned on. ■ Press the button on MovieMate or on the remote control. ■ Press the or Play button on the external equipment. ■ Make sure you don't have cables connected to more than one video port. You can only use one connection at a time (see page 21). You see the message No Signal. ■ Make sure the equipment is turned on. ■ Make sure your cable(s) are connected correctly (see page 21). ■ Press the button on MovieMate or the remote control to select the external video source. Allow a few seconds for MovieMate to sync up. You see the message Signal not supported. Press the page 39). button on the remote control and check the Video Signal setting (see The picture is cut off (too large) or too small. Press the button on the remote control and select the appropriate aspect ratio. The picture is distorted. ■ If you're using an extension cable, electrical interference may affect the signal. ■ Check the solutions on pages 52 and 53. The colors are not right. ■ Press the page 39). button on the remote control and check the Video Signal setting (see 54 Problem Solving