Epson WorkForce 545 Start Here - Page 1

WorkForce® 545/645 Series Start Here Read these instructions before using your product. 1 Unpack 2 Raise the control panel and press the On button. Note: If you want to lower the control panel, squeeze the release bar underneath. French control panel sticker (included for Canada only) Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all protective materials. Caution: To avoid damaging your product, always squeeze the release bar to lower the control panel. 3 Select settings 1 To select English as your language, press OK. Caution: Do not remove the plastic strip shown below. It is part of the Automatic Document Feeder. 2 Turn on 1 Connect the power cord to the back of the printer and to an electrical outlet. If you want to change the language, press or to select it, then press OK. 2 Select your country/region and press OK. 3 Select Summer if Daylight Saving Time is in effect (spring through summer); otherwise, select Winter. Press OK. 4 Select the date format and press OK. 5 Press the number keys to enter the date and press OK. 6 Select the time format (12h or 24h) and press OK. 7 Press the number keys to enter the time. Then press or to select AM or PM, if necessary. 8 Press OK. Note: You can change the date and time settings using the product's control panel. For more information, see the online User's Guide. Caution: Do not connect to your computer yet. 4 Install ink cartridges 1 Lift up the scanner unit. *412191500* *412191500*