Epson WorkForce Pro WF-6530 User Manual - Page 222
Output Settings - Fax, Rings to Answer
View all Epson WorkForce Pro WF-6530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
Setting Distinctive Ring Rings to Answer Remote Receive Options All Single Double Triple Double&Triple 1 to 9 Off On Start Code Description If you are using a Distinctive Ring Service on your phone line, your telephone company can assign two or more phone numbers to the same line and assign different ring patterns to each. If you use this service, select the number of rings for your fax number so your product can receive faxes on the correct number of rings. Select All for phones lines that do not use this service. Sets the number of rings before your product receives a fax. If Receive Mode is set to Auto and an answering machine is connected to the product, make sure this setting is set higher than the number of rings your answering machine is set to answer a call. Lets you start receiving faxes using your phone instead of operating the product (if the Receive Mode is set to Auto). When you select On, you must also set a Start Code. If you are using a cordless handset with its base connected to the product, you can start receiving the fax by entering the code using the handset. Parent topic: Selecting Advanced Fax Settings Output Settings - Fax Set the output options you want to use for incoming faxes. Note: If you select Save to Inbox, faxes are saved in the product's memory. Delete faxes after viewing or printing them to prevent the memory from filling up. Even if you select other options for saving faxes, they may be saved temporarily in the product's memory. 222