Epson WorkForce Pro WF-C5210 Start Here - Installation Guide for U.S. and Cana - Page 1

WF-C5210/WF-C5290 Start Here Read these instructions before using your product. Note for Spanish speakers/Nota para hispanohablantes: Para obtener instrucciones de configuración en español, consulte la Guía de instalación en www.epson.com/support/wfc5210sp o www.epson.com/support/wfc5290sp (requiere una conexión a Internet). 1 Unpack 2 Turn on and configure 1 Connect the power cord to the back of the product and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Turn on the product. 1 Remove all protective materials from the product. 2 Raise the printer cover and remove all protective materials from inside the product, then close the printer cover. 3 Select your language and time on the LCD screen. Note: You can change these settings later using the product's control panel. For more information, see the online User's Guide. 3 Install ink supply units (ink packs) Note: • The product is designed for use with Epson® ink packs only, not third-party ink. • The ink packs included with the product are designed for product setup and not for resale. • After some ink is used for charging, the rest is available for printing. Caution: Keep the ink packs out of the reach of children and do not drink the ink. 1 Unlock and open the ink pack tray cover, then remove the packing material. 3 Insert the output tray. 2 Press an ink pack tray to release it, then pull the tray out.