Epson WorkForce Pro WF-C5210 Users Guide for U.S. and Canada - Page 209

• If you installed an optional paper cassette unit, be sure to enable the cassette unit in the printing software. • If your product pauses during printing, make sure the front cover is closed. • For best results, follow these guidelines: • Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick. • Load paper in the cassette printable side down. • Do not load binder paper with holes in the cassette. • Follow any special loading instructions that came with the paper. Parent topic: Solving Paper Problems Related references Paper Jams Inside the Product Paper Loading Capacity Paper Jams Inside the Product If you see a message that paper has jammed in the product, follow the on-screen instructions to locate and remove the jammed paper. Take the following precautions when removing jammed paper from the product: • Remove the jammed paper carefully. Using too much force may damage the product. • Unless specifically instructed, avoid tilting the product, placing it on its side, or turning it upside down, as ink may spill. Warning: Never touch the buttons on the control panel while your hand is inside the product. If the product starts operating, it may cause an injury. Do not touch any protruding parts inside the product. Parent topic: Solving Paper Problems Related topics Loading Paper Paper Ejection Problems If you have problems with paper ejecting properly, try these solutions: • If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper. Select the correct paper size when you reprint. 209