Epson WorkForce Pro WF-C5210 Administrator Guide - Page 52
TCP/IP, Basic, Manual, IP address, Subnet Mask, Default Gateway, Internet, Parent topic
View all Epson WorkForce Pro WF-C5210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
4. Double-click the product you are configuring. Note: If several products of the same model are connected, you can identify them by their MAC address. 5. From the menu on the left, under TCP/IP, select Basic. You see a window like this: 6. Select Manual. 7. Enter the product's IP address, Subnet Mask, and Default Gateway settings in the fields provided. Note: To connect the product to a secure network, enter a static IP address. You can also configure the DNS settings by selecting DNS, and enter proxy settings by selecting Internet from the TCP/IP menu. 8. Select Send. 9. Enter the current administrator password if necessary, and click OK. Parent topic: Using EpsonNet Config Network Configuration Software 52
52
4.
Double-click the product you are configuring.
Note:
If several products of the same model are connected, you can identify them by their MAC
address.
5.
From the menu on the left, under
TCP/IP
, select
Basic
.
You see a window like this:
6.
Select
Manual
.
7.
Enter the product's
IP address
,
Subnet Mask
, and
Default Gateway
settings in the fields provided.
Note:
To connect the product to a secure network, enter a static IP address. You can also configure
the DNS settings by selecting
DNS
, and enter proxy settings by selecting
Internet
from the
TCP/IP
menu.
8.
Select
Send
.
9.
Enter the current administrator password if necessary, and click
OK
.
Parent topic:
Using EpsonNet Config Network Configuration Software