Epson WorkForce Pro WF-C5290 Users Guide for Latin America - Page 45

Note: For more information on the Web Config utility, see the Administrator's Guide. 1. Print a network status sheet. 2. Locate the IP address for your product that is listed on the network status sheet. 3. On a computer or other device connected to the same network as your product, open a web browser. 4. Enter your product's IP address into the address bar. You see the available Web Config utility options. Parent topic: Changing or Updating Network Connections Related tasks Printing a Network Status Sheet Changing a USB Connection to a Wi-Fi Connection If you have already connected your product to your computer using a USB connection, you can change to a Wi-Fi connection. 1. Disconnect the USB cable from your product. 2. Uninstall your product software. 3. Download and install your product software from the Epson website using the instructions on the Start Here sheet. Parent topic: Changing or Updating Network Connections Related concepts Uninstall Your Product Software Related tasks Disabling Wi-Fi Features Changing a Wi-Fi Connection to a Wired Network Connection If you have already connected your product to your computer wirelessly, you can change to a wired network connection if necessary. 1. Disable your product's Wi-Fi features. 2. Connect one end of an Ethernet network cable to the product's LAN port. 3. Connect the other end to any available LAN port on your router or access point. 45