Epson WorkForce Pro WF-C5710 Start Here - Installation Guide for Latin America - Page 1

WF-C5710/WF-C5790 Start Here Read these instructions before using your product. Important Safety Instructions: When using telephone equipment, you should always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury, including the following: • Do not use this Epson® product near water. • Always keep this guide handy. • Avoid using a telephone during an electrical storm. There may be a remote risk of electric shock from lightning. • Do not use a telephone to report a gas leak in the vicinity of the leak. Caution: To reduce the risk of fire, use only a No. 26 AWG or larger telecommunication line cord. 1 Unpack 3 Insert the output tray. 2 Turn on and configure 1 Connect the power cord to the back of the product and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Turn on the product. 1 Remove all protective materials from the product. 2 Lift up the scanner unit and remove all protective materials from inside the product, then close the scanner unit. 3 Select your language, country, and time on the LCD screen. Note: You can change these settings later using the product's control panel. For more information, see the online User's Guide. 3 Install ink supply units (ink packs) Note: • The product is designed for use with Epson ink packs only, not third-party ink. • The ink packs included with the product are designed for product setup and not for resale. • After some ink is used for charging, the rest is available for printing. Caution: Keep the ink packs out of the reach of children and do not drink the ink. 1 Unlock and open the ink pack tray cover, then remove the packing material.