Epson WorkForce Pro WF-M5799 Administrator Guide - Page 22
Remote GatewayTunnel Mode, Local/Remote port
View all Epson WorkForce Pro WF-M5799 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Setting Encapsulation Remote Gateway(Tunnel Mode) Security Protocol Options/Description If you selected IPsec as the Access Control option, select one of these encapsulation modes: Transport Mode: if you are using the product on the same LAN; IP packets of layer 4 or later are encrypted Tunnel Mode: if you are using the product on an Internet-capable network, such as IPsec-VPN; the header and data of IP packets are encrypted If you selected Tunnel Mode as the Encapsulation option, enter a gateway address between 1 and 39 characters long If you selected IPsec as the Access Control option, select one of these security protocols: ESP: to ensure the integrity of authentication and data, and encrypt data AH: to ensure the integrity of authentication and data; if data encryption is prohibited, you can use IPsec Group Policy Guidelines Service name ENPC Protocol type Local/Remote port number UDP 3289/Any port SNMP UDP 161/Any port LPR RAW (Port9100) IPP/IPPS TCP TCP TCP 515/Any port 9100/any port 631/Any port Controls these operations Searching for a product from applications such as printer or scanner drivers, or EpsonNet Config Acquiring and configuring MIB from applications such as printer or scanner drivers, or EpsonNet Config Forwarding LPR data Forwarding RAW data Forwarding AirPrint data (IPP/IPPS printing) 22